TRA7758G Wheel nuts, splined, 17mm, serrated (green-anodized) (4)
TRAXXAS
These are the Traxxas 17mm Serrated Splined Wheel Nuts, replacement part for the X-Maxx and can also be used on the VXL Revo. Features: Aluminum c...
View full details
These are the Traxxas 17mm Serrated Splined Wheel Nuts, replacement part for the X-Maxx and can also be used on the VXL Revo. Features: Aluminum c...
View full details
Driveshafts, front, steel-spline constant-velocity (complete assembly) (2) Extreme heavy-duty front steel CV (constant velocity) driveshafts are e...
View full details
This is the suspension multi-tool for Traxxas Revo. It is used to adjust the Shock Upper Cap, Shock Rod-end removal/install and to tighten/loosen t...
View full details
This is a replacement Traxxas Body Mount Set. This set includes the front and rear mount.
Steering blocks (l&r) Replacement left and right steering blocks Replacement part for these models: Bandit®
Half shafts, heavy duty (external splined (2)/ internal splined (2))/ metal u-joints (4) Set of two heavy-duty half shafts includes internal shaft...
View full details
Traxxas Battery/charger completer pack (includes TRA2969 2-amp NiMH peak detecting AC charger (1), TRA2923X 3000mAh 8.4V 7-cell NiMH battery (1))
Spring, shock (GTR) (2.22 rate, black) (1 pair) 1/16 scale GTR shock springs use high-quality spring steel with a durable red powder-coated finish...
View full details
This is the Exo-Carbon finish wing for use on the Traxxas 1/16 E-Revo VXL 4WD RTR.Features: Nylon construction in an exo-carbon finishIncludes: One...
View full details
Springs, front (progressive, +20% rate, blue) (2) Pair of long progressive-rate springs are custom-wound to provide responsive control over small ...
View full details
This is the optional heavy-duty servo saver spring for the Traxxas Revo.Features: Steel construction Chrome Plated Conical Shape Includes: One He...
View full details
Input gear, 22-tooth/ input shaft (transmission) (heavy duty) (fits Bandit®, Rustler®, Stampede®, Slash® 2WD) The heavy-duty input shaft features...
View full details
Toe link, 5.0mm steel (front or rear) (2) Pair of steel 5 mm toe links fit front or rear Replacement part for these models: E-Revo® VXL Brushless
This is the connecting rod for the Traxxas 2.5 and 3.3 Engine. This part connects the piston to the crankshaft.Features: Aluminum construction Pre...
View full details
Turnbuckles, camber link, 47mm (67mm center to center) (front)
Turnbuckles, aluminum (blue-anodized), camber links, front, 39mm (2), rear, 49mm (2) (assembled w/rod ends & hollow balls)/ wrench Traxxas’ al...
View full details
This is a set of two optional blue aluminum stub axle carriers with bearings from Traxxas. These stub axle carriers mount to the rear control arms,...
View full details
Steering bellcranks/ servo saver/ servo saver spring/ servo spring retainer (requires 5x11 BB (2) Steering bellcranks with servo saver, servo save...
View full details
This is the pair of steel pushrods for the Traxxas Revo.Features: Metal pushrod construction Plastic rod ends with hollow ball ends Includes: Two...
View full details
Spring retainers, upper & lower (2)/ spring pre-load spacers: 1mm (4)/ 1.5mm (2)/ 2mm (2)/ 4mm (2)/ 8mm (2) (Big Bore Shocks) Replacement Big ...
View full details
Spur gear, 65-tooth (0.8 metric pitch, compatible with 32-pitch) 65-tooth spur gear (32-pitch). Traxxas spur gears let you fine-tune the performanc...
View full details
This is the Traxxas 14T Pinion Gear and Set Screw for the LaTrax Rally Car.Features: Silver/grey colored Made of steel For the LaTrax Rally Car I...
View full details
Nuts, 5mm flanged nylon locking (steel, serrated) (8) Set of eight 5 mm nylon locking nuts feature a serrated flange to keep them snug on the whee...
View full details
Stub axle carriers, Rustler®/Stampede®/Bandit (2), 6061-T6 aluminum (red-anodized)/ 5x11mm ball bearings (4) Traxxas aluminum stub axle carriers i...
View full details
This is a pack of two replacement Traxxas E-Revo VXL 2.0 Steel Machined Steel Drive Cups. Also included are two 4x17mm screw pins.
Starter, recoil (complete with screws) (TRX® 2.5) Replace the electric EZ-Start® system on your TRX® 2.5 or 3.3 engines with the recoil pull start...
View full details
Screw pin, 4x15mm (6) Set of six 4x15 mm screw pins with hex-drive heads Replacement part for these models: E-Revo® VXL Brushless Revo® Slayer® ...
View full details
This is a foam body washer set with two each of 2mm, 3mm, and 4mm foam washers from Traxxas.
MODEL 58314-4: 1/10 scale Slash® BL-2s™ 2WD brushless short course truck assembly kit, TQ 2.4 GHz radio system, BL-2s™ brushless power system,...
View full details
This is a Traxxas color-burst painted body with pre-applied decals for the 1/18 LaTrax Desert PreRunner 4WD racing truck.
Bumper mounts, front & rear/ screw pins (4) Replacement front and rear bumper mounts for TRX-4®. Includes screw pins (4). Replacement part fo...
View full details
Traxxas Blast 24" High Performance RTR Race Boat - Orange MODEL 38104-8: Blast: 1/10 scale race boat with waterproof electronics. Fully-assembled...
View full details
This is a replacement Traxxas Front Bumper, and is intended for use with the Traxxas Maxx Monster Truck. Features:Factory Replacement Bumper Includ...
View full details
This is a replacement Traxxas Chassis, and is intended for use with the Traxxas Slash 4x4.
This is the Traxxas set of four Hard Anodized GTR Shocks for the 1/16th scale.Features: Fully assembled Hard anodized Titanium shock shafts Inclu...
View full details
Traxxas aluminum stub axle carriers add both strength and beauty. In addition to the durability and precision of the machined billet 6061-T6 alumin...
View full details
Driveshaft, center, 6061-T6 aluminum (blue-anodized) Formed from 6061-T6 aluminum, this center driveshaft is both strong and lightweight. Internal...
View full details
This is a set of Traxxas Box/Receiver/Wire Cover/Foam Pads.Features: Molded composite plastic receiver box with rubber plug Fastens to chassis to ...
View full details
Traxxas Paddle Tires let you tear up sand, snow - and even water! These paddles are pre-mounted on black wheels that will fit the Unlimited Desert ...
View full details
Spring, shock (GTR) (6.4 rate purple) GTR shock springs use high-quality spring steel with a durable red powder-coated finish. GTR springs are off...
View full details
Videos LaTrax Alias Quad-Rotor Ready-To-Fly Helicopter Quad Rotor Flight Re-imagined,More Powerful, More Durable, More Fun! Alias is a cle...
View full details
Ball bearings (5x10x4mm) (2) (metal shielded, for clutch bell) Pair of 5x10x4 mm ball bearings Replacement part for these models: Jato® Revo® Sl...
View full details
Traxxas front left and right halves differential bulkhead for the Revo are constructed of black plastic. Rocker shafts preinstalled. This package i...
View full details
Turnbuckles, 78mm (2) Replacement 78 mm metal turnbuckles. Rod ends sold separately. Replacement part for these models: BIGFOOT® No. 1 Officiall...
View full details
These are the Traxxas optional aluminum steering blocks in green for the Rustler, Stampede and Bandit.Features: T-6061 aluminum construction that’s...
View full details
Ready-To-Race with Traxxas Stability Management, TQi 2.4GHz radio system, VXL-6s brushless power system, factory-installed LED lighting, and lice...
View full details
MODEL 68277-4: Slash® 4X4 Ultimate: 1/10 scale 4X4 short-course truck, Fully-assembled, waterproof electronics, Ready-To-Race®, with TQi™ 2.4 ...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 4pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS