This is a set of two optional blue aluminum stub axle carriers with bearings from Traxxas. These stub axle carriers mount to the rear control arms,...
View full details
Steering bellcranks/ servo saver/ servo saver spring/ servo spring retainer (requires 5x11 BB (2) Steering bellcranks with servo saver, servo save...
View full details
This is the pair of steel pushrods for the Traxxas Revo.Features: Metal pushrod construction Plastic rod ends with hollow ball ends Includes: Two...
View full details
Spring retainers, upper & lower (2)/ spring pre-load spacers: 1mm (4)/ 1.5mm (2)/ 2mm (2)/ 4mm (2)/ 8mm (2) (Big Bore Shocks) Replacement Big ...
View full details
Spur gear, 65-tooth (0.8 metric pitch, compatible with 32-pitch) 65-tooth spur gear (32-pitch). Traxxas spur gears let you fine-tune the performanc...
View full details
Nuts, 5mm flanged nylon locking (steel, serrated) (8) Set of eight 5 mm nylon locking nuts feature a serrated flange to keep them snug on the whee...
View full details
Stub axle carriers, Rustler®/Stampede®/Bandit (2), 6061-T6 aluminum (red-anodized)/ 5x11mm ball bearings (4) Traxxas aluminum stub axle carriers i...
View full details
This is a pack of two replacement Traxxas E-Revo VXL 2.0 Steel Machined Steel Drive Cups. Also included are two 4x17mm screw pins.
Starter, recoil (complete with screws) (TRX® 2.5) Replace the electric EZ-Start® system on your TRX® 2.5 or 3.3 engines with the recoil pull start...
View full details
Screw pin, 4x15mm (6) Set of six 4x15 mm screw pins with hex-drive heads Replacement part for these models: E-Revo® VXL Brushless Revo® Slayer® ...
View full details
This is a foam body washer set with two each of 2mm, 3mm, and 4mm foam washers from Traxxas.
MODEL 58314-4: 1/10 scale Slash® BL-2s™ 2WD brushless short course truck assembly kit, TQ 2.4 GHz radio system, BL-2s™ brushless power system,...
View full details
Bumper mounts, front & rear/ screw pins (4) Replacement front and rear bumper mounts for TRX-4®. Includes screw pins (4). Replacement part fo...
View full details
Traxxas Blast 24" High Performance RTR Race Boat - Orange MODEL 38104-8: Blast: 1/10 scale race boat with waterproof electronics. Fully-assembled...
View full details
This is a replacement Traxxas Front Bumper, and is intended for use with the Traxxas Maxx Monster Truck. Features:Factory Replacement Bumper Includ...
View full details
This is a replacement Traxxas Chassis, and is intended for use with the Traxxas Slash 4x4.
This is the Traxxas set of four Hard Anodized GTR Shocks for the 1/16th scale.Features: Fully assembled Hard anodized Titanium shock shafts Inclu...
View full details
Traxxas aluminum stub axle carriers add both strength and beauty. In addition to the durability and precision of the machined billet 6061-T6 alumin...
View full details
Driveshaft, center, 6061-T6 aluminum (blue-anodized) Formed from 6061-T6 aluminum, this center driveshaft is both strong and lightweight. Internal...
View full details
This is a set of Traxxas Box/Receiver/Wire Cover/Foam Pads.Features: Molded composite plastic receiver box with rubber plug Fastens to chassis to ...
View full details
Traxxas Paddle Tires let you tear up sand, snow - and even water! These paddles are pre-mounted on black wheels that will fit the Unlimited Desert ...
View full details
Spring, shock (GTR) (6.4 rate purple) GTR shock springs use high-quality spring steel with a durable red powder-coated finish. GTR springs are off...
View full details
Videos LaTrax Alias Quad-Rotor Ready-To-Fly Helicopter Quad Rotor Flight Re-imagined,More Powerful, More Durable, More Fun! Alias is a cle...
View full details
Ball bearings (5x10x4mm) (2) (metal shielded, for clutch bell) Pair of 5x10x4 mm ball bearings Replacement part for these models: Jato® Revo® Sl...
View full details
Traxxas front left and right halves differential bulkhead for the Revo are constructed of black plastic. Rocker shafts preinstalled. This package i...
View full details
Turnbuckles, 78mm (2) Replacement 78 mm metal turnbuckles. Rod ends sold separately. Replacement part for these models: BIGFOOT® No. 1 Officiall...
View full details
These are the Traxxas optional aluminum steering blocks in green for the Rustler, Stampede and Bandit.Features: T-6061 aluminum construction that’s...
View full details
6x10x12 Roller Clutch One-way starter bearing for the TRX® Pro.15 nitro engine Replacement part for these models: TRX® Pro .15
Just like the Traxxas heavy-duty suspension arms, X-Maxx green roof skid plates use our toughest composite material. Whether you’re sending it at t...
View full details
Nuts, 5mm nylon locking (8) Replacement part for these models: Jato® Nitro Rustler® Revo® Slayer® Pro 4X4 T-Maxx®
Stub axle assembly, front, outer, extreme heavy duty (1) (left or right) (assembled with internal-splined half shaft) Extreme heavy-duty front out...
View full details
Traxxas updated stock replacement fuel tank is made of clear, nylon construction. Black fuel tank cap (spring loaded). This fuel tank is unique to ...
View full details
Tires & wheels, assembled, glued (2.8") (RXT black wheels, Talon EXT tires, foam inserts) (4WD electric front/rear, 2WD electric front only) (...
View full details
This is a 4x14mm Button Head Screw Set for the Traxxas Revo vehicle. Features Steel constructionBlack in colorLow-profile, button-head designHex dr...
View full details
Traxxas E-Revo 2.0 Aluminum Heavy-Duty Steering Link Push Rods are a machined aluminum upgrade that provides increased strength, lighter weight and...
View full details
Sold out
This is a Traxxas Painted and Decaled Rock n' Roll Body for the Slash 4x4.
This is the Traxxas X-Maxx Replacement Center Skidplate.Features Molded composite plastic construction Reduces damage to underside of chassis and ...
View full details
Features:Aluminum constructionAnodized red in colorIncludes:Four Toe LinksEight Hollow BallsOne 5mm WrenchRequires:Installation on the vehicleTechn...
View full details
These are the front and rear toe links for use on the Traxxas 1/16 E-Revo VXL 4WD RTR.Features: Nylon construction that is red in colorIncludes: F...
View full details
This is the aluminum exhaust header spring mount for the Traxxas 2.5, 2.5R and 3.3 Engines.Features: Aluminum construction that’s silver in color ...
View full details
Traxxas Battery hold-down/ mounts (front & rear)/ battery compartment spacers/ foam pads (fits Maxx V2 with extended chassis (352mm wheelbase))
Traxxas Mini XRT VXL-3S 4wd - Orange Mini XRT® is a true rocket with full 1/10 scale Velineon® 3s brushless power in a compact, take-anywhere size...
View full details
This the LaTrax Alias Quadcopter Black Rotor Blade Set. It includes two rotor blades and two screws. Features: Plastic construction Flexible to wi...
View full details
Tires & wheels (Tracer 2.2" chrome wheels, Anaconda 2.2" tires with foam inserts)
This is the Receiver Box for Traxxas 1/16 scale on-road vehicles.Features: Plastic construction Allows installation and removal of the receiver wi...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 4pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS
