TRA7766 Springs, shock (natural finish) (GTX) (1.055 rate) (2)
TRAXXAS
FEATURESSteel constructionINCLUDESTwo Shock SpringsSPECIFICATIONSLength: 6.2" (158mm)Inner Diameter: 1.13" (28.8mm)
FEATURESSteel constructionINCLUDESTwo Shock SpringsSPECIFICATIONSLength: 6.2" (158mm)Inner Diameter: 1.13" (28.8mm)
This is the center driveshaft for the Latrax SST Stadium Truck.Features: Aluminum constructionIncludes: Center Driveshaft 1.5 x 8mm Steel Pin
This is a replacement LaTrax Front and Rear Suspension Pin Retainer. Package includes one front pin retainer, and one rear pin retainer. Features: ...
View full details
This is a replacement LaTrax Front & Rear Suspension Arm Set. Package includes four suspension arms that can be used in either the front or rea...
View full details
This is an optional LaTrax Carbon Fiber Conversion Kit, intended for use with the LaTrax 1/18 Rally Car. This kit includes the carbon fiber chassis...
View full details
This is a pair of two replacement Traxxas Pre-Mounted BFGoodrich Rally Tires, mounted on Rally 12-Spoke Wheels. These tires are fully assembled, gl...
View full details
This is the Traxxas pair of White GTR XX-Long Spring Shocks with an Orange Compression Rating, 0.711 (2). These Spring Shocks fit the Traxxas Slash...
View full details
This is the Body Bumper Foam for the Traxxas 1/10 scale Rally Race Car TRAD74**FEATURES:Foam construction, black in colorInstalls on chassis undern...
View full details
These are the GTR Shock Springs for use on theTraxxas 1/16 Slash VXL 4WD RTRFEATURES:Steel constructionRed in colorDouble green0.88 rateINCLUDES:Tw...
View full details
These are the front and rear toe links for the Traxxas Grave Digger off-road truck.Features: Molded composite plastic construction that is green in...
View full details
This is the white wing and decal sheet for the 1/16 Traxxas E-Revo and E-Revo VXL. Features: Nylon construction White in color  Includes: (...
View full details
This is a set of four Traxxas Molded Composite Push Rods in Green with eight Hollow Balls. Note:Fits the following models:1/16 E-Revo VXL1/16 E-Rev...
View full details
This is a pair of SCT off-road racing tires, foam inserts mounted on SCT satin chrome, red beadlock style wheels from Traxxas. Features: SCT sa...
View full details
This is the Differential Rebuild Kit for the Traxxas 1/16 scale VXL series.FEATURES:Nylon and rubber constructionINCLUDES:Two Diff Gear CoversTwo L...
View full details
This is the Sway Bar Wires Set for the Traxxas Slash 4x4FEATURES:Steel constructionBlack and silver for soft and hardINCLUDES:2 front sway bars2 re...
View full details
This is a set of two Traxxas Progressive Rate Front Shock Springs, and are intended for use with the Traxxas Slash 4x4. The Slash 4X4’s fully adjus...
View full details
This is the Traxxas Fiberglass Go-Pro Camera Mount and is intended for use the Traxxas Slash 4x4. Traxxas makes it easy to capture exciting first-p...
View full details
These are the Traxxas Front/Rear Plastic Non-Adjustable Camber Links for the Telluride 4x4.Features: Grey colored Made of tough plastic Fits the f...
View full details
This is the Splitter MountFor the Traxxas 1/7 X-1 4WD On-Road Supercar TQi/2.4GHz RTR (TRAD45**).FEATURES:Made of a black composite materialINCLUDE...
View full details
Includes: (2) Battery Hold Down Retainers Replacement Part For: XO-1® (Model# 64077-3)
Rear Bumper, Rear Brace: Slayer This is the Rear Bumper for theTraxxas Slayer Pro 4WD Short Course Nitro RTR Features Nylon constructionBlack in co...
View full details
Traxxas optional upper/lower front suspension arms for the Traxxas Slayer Pro. Constructed of black composite plastic. Left front for Slayer 4x4 Pr...
View full details
This is the Traxxas Nerf bars, chassis (black). This is Traxxas part number 5923Part Number: 5923 / TRA5923FitsSlayerSlayer Pro
These are the optional aluminum push rods for the Traxxas Slayer Pro 4WD Short Course Nitro RTR.Features: Aluminum construction with Nylon rod ends...
View full details
Traxxas center differential kit for use on the Slayer. From the factory, the differentials are filled with 30K weight silicone diff fluid. This is ...
View full details
This is a set of two Traxxas BFGoodrich Mud-Terrain T/A KM2 Tires, Pre-Mounted on Split-Spoke SCT Wheels. These are intended for use on the front a...
View full details
These are the Low CG Nerf Bars in Gray for the1/10 scale 2WD Traxxas Slash.FEATURES:Plastic construction, gray in colorFor use with the Low CG chas...
View full details
These are the Traxxas Blue Nerf Bars for the Low CG Chassis Conversion Kit on the Slash 2WD.Features: Blue colored Made of plastic For the Traxxas...
View full details
This is the Drive Strut Alignment Tool for the Traxxas DCB M41 Catamaran, TRAB7046. jxs 01/25/17 ir/jxs
This is the housing for the front and rear differential on the Traxxas Summit Truck RTR.Features: Nylon construction that is black in colorIncludes...
View full details
FEATURES:Nylon constructionRed in colorBeadlock styleINCLUDES:Two Red Sidewall ProtectorsTwenty Four 2.5x8mm Cap ScrewsREQUIRES:Installation on the...
View full details
This is a Rear Bumper and Mount for the Traxxas Summit from Traxxas. Features Black plastic with mounting screws Includes Rear bumperRear bumper mo...
View full details
This is the roof and front bumper lightbar for use on the Traxxas Summit Truck RTR.Features: Plastic construction that is chrome in colorIncludes: ...
View full details
These are the decal sheets for the Traxxas Summit.Features: Pre-cut peel and stick application Windshield, lights, bumper, winch and more Include...
View full details
This is the 1st speed gear 32T for the Traxxas Nitro Jato Stadium Truck.Features: Nylon construction that’s black in colorIncludes: 1st Speed Gear...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL:Â sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 10am to 3pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS