TRA8366 Spring, shock (red)
TRAXXAS
These are the Traxxas 4-Tec 2.0 White Stripe 2.8 Rate Shock Springs (2). These can be used on all 4-Tec 2.0 cars, including the Ford GT and Mustang...
View full details
These are the Traxxas 4-Tec 2.0 White Stripe 2.8 Rate Shock Springs (2). These can be used on all 4-Tec 2.0 cars, including the Ford GT and Mustang...
View full details
This is a set of shock springs red with black stripe for the Traxxas Ford GT 4Tec.
This is a replacement Traxxas Short Ultra Shocks for the 4-Tec 2.0. This shock set includes all necessary parts for two shocks, minus springs. This...
View full details
This is a replacement Traxxas 4-Tec 2.0 Front Suspension Arm Set. Features:Factory Replacement Part Includes:(2) Front Suspension Arms
These are the Traxxas 4-Tec 2.0 Steering Bellcranks and Hardware. These are used on both the Ford GT and Mustang GT versions.Fits4-Tec 2.0
Product Details This Steering block and rear Hub Carrier set is manufactured from super-tough and long-lasting material. Features: High-quality...
View full details
This is the Rear Body for the Toyota Hilux, TAMC0913. ...
View full details
This is the Front and Rear Transfer Case Output Shafts for the Traxxas TRX-4 and TRX-6. Features: Metal in Construction  Includes: (1) Fron...
View full details
This is the Rear Differential Housing for the Traxxas 4-Tec 2.0 chassis and Ford GT. Includes: (1) Rear Differential Housing Â
Product Details Overview Extra hard high carbon motor pinions are built to last with our hi-performance GEN3 steel slipper units. Made...
View full details
This is a set of inner drive cups and screw pins for the Traxxas Ford GT 4Tec.
This is the set of two Traxxas cross pin and drive pin to rebuild front axle shafts.
This is the Traxxas 4-Tec 2.0 Rear Bulkhead. This is used in both the Ford GT and Mustang GT versions.Fits4-Tec 2.0
This is the Ford GT Clear Body Set for the Traxxas 4-Tec. Features: Officially Licensed Mounting materials included Clear Body Factory Trimmed ...
View full details
This is a top plate and bellcrank set for the Losi Desert Buggy XL-E.
’??¶« Made from strong sintered metal (Sintered metal provides superior metallurgical characteristics and can be manufactured with very tight toler...
View full details
Optional Ratio Gear Sets.’??¶« Use the gears in different combinations front and rear to reduce torque twist in the rear and overdrive the front ax...
View full details
This is a Traxxas green anodized aluminum GTX shock body, replacement for the X-Maxx. Features: Aluminum construction, anodized green in color All...
View full details
Traxxas X-Maxx GTX Assembled Shocks. These shocks are factory assembled, but are not filled with shock oil and do not include shock springs. Packag...
View full details
This is the Red Tail Lights, Exhaust Tips, Exhaust Mount and Screws for the Traxxas Ford GT and 4-Tec 2.0 AWD. Features: Plastic construction R...
View full details
TRA4262 32mm Steel Shock Shafts (Chrome Finish) (2) Replacement part for these models:Nitro 4-Tec Accessory part for these models:4-Tec 2.0 AWD Cha...
View full details
This is the Offset Rod Ends for the Traxxas TRX-4 and TRX-6. Features: Plastic in Construction  Includes: (4) Offset Rod Ends
This is a pack of ten replacement Traxxas 10° TRX-4 Angled Rod Ends.Â
These are the Traxxas 4-Tec 2.0 Orange Stripe 3.325 Rate Shock Springs (2). These can be used on all 4-Tec 2.0 cars, including the Ford GT and Must...
View full details
This is Transmission Input and Output Shafts for the Traxxas TRX-4 and TRX-6. Features: Metal in Construction  Includes: (1) Input Shaft, (...
View full details
This is the Differential Cover for the Traxxas TRX-4 or TRX-6. Features: Gray in color Plastic in Construction Front or Rear Application  I...
View full details
Description: Traxxas Sealed Receiver Box - TRA8324This item package consists of the following Traxxas items. Box, receiver (sealed) (steering servo...
View full details
This is the Transfer Case Gears for the Traxxas TRX-4 and TRX-6. Features: Metal in Construction  Includes: (3) Transfer Case Gears
This is a replacement Traxxas TRX-4 Transmission Gear Set.Â
These are the Traxxas 4-Tec 2.0 Foam Body Washers.Fits4-Tec 2.0
RPM Rock Sliders start with all-new frame-rail mounts that use both the stock screw mount position at the 4-link upper bolts as well as the inner s...
View full details
This is the 1.9” Extra Wide Rear Response Touring Tires with Foam Inserts for the Traxxas 4-Tec 2.0 chassis and Ford GT. Features: Compatible w...
View full details
This is a replacement battery tray for the Losi 8IGHT-E, and Losi 8IGHT-E 2.0 1/8th scale electric buggies.
This is a LRP Z 28R Spec Non Pull Backplate, and is intended for use with the LRP Z 28R Spec 1, 2 and 3 nitro engines.
Product Details This Truck Suspension Arm Set will provide Upper and Lower Front Suspension Arms and Lower Rear Suspension Arms for one side of...
View full details
This is a pair of 1.9" Goodyear Wrangler Slick Tires mounted to 8-Spoke Wheels from Traxxas. Features: Hard slick rubber construction Eight spo...
View full details
Sold out
This is the Body Mount, Rear/Body Mount Posts, Front (2)/Body Washer, Rear (2) by TraxxasFEATURES:Black plastic constructionINCLUDES:One body mount...
View full details
These are the two Wheels for the #6978 Wheelie Barused on the NHRA Funny Car Race Replica from Traxxas, TRAD69**.FEATURES:Plastic construction, bla...
View full details
This is the Battery Charger for the optional NiMH Batteryused in the Traxxas TQi Docking Base.FEATURES:Charges the optional Traxxas #3037 NiMH batt...
View full details
Spring, header (for Revo big block header)/o-ring (1) & gasket (1) (for exhaust header flange)
Traxxas Needle Assembly High-Speed TRX 2.5 Features: Brass construction. Includes: One needle One fuel fitting Two 5.3x7.8x0.6mm washers Specs:...
View full details
This is the replacement cylinder head for theTraxxas 2.5 Truck/Buggy engine.FEATURES:Aluminum construction.INCLUDES:One aluminum cooling head (cyli...
View full details
Traxxas brake disc set for the 3.3 T-Maxx RTR is constructed of steel Includes: Brake Disc for the 3.3 Traxxas T-Maxx RTR COMMENTS: Fits the 3.3 ve...
View full details
Sold out
Pulley shaft, front (blue-anodized, light-weight aluminum) Lighter than the stock steel pulley shaft, the attractive, blue-anodized 6061-T6 aluminu...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL:Â sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 10am to 3pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS