One of the weakest points on a Lexan body is where the body mounts to the chassis. The holes cut in the body for the body posts have a tendency to ...
View full details
Sold out
RPM gear covers for the Associated SC10, B4 & T4 are built to the highest RPM standards of quality, fit, and finish. RPM SC10, T4 & B4 gear...
View full details
One of the most critical suspension adjustments on a R/C vehicle is the vehicle's camber. RPM has proven time after time that even the most experie...
View full details
Product Details Key Features Made with 0.040 crystal clear polycarbonate Perfect fit and proportions for Electric and Nitro Stampede® Classic 70...
View full details
Product Details Key Features Made from durable/genuine .040 polycarbonate Classic VW® bug styling with Baja flair Simulated rear engine detail j...
View full details
PRO117300 Badlands 2.8 All Terrain Truck Tire:TRA 2.8 Whl
Product Details Key Features Interco TSL SX Super Swamper Replica Design XL Size to Tackle Tougher Terrain and More Obstacles Maximum Ground Cle...
View full details
This is a replacement spin-start back plate from Losi. For .21 to .26 engines.
Key Features Debond misaligned parts Clean up excess adhesive Remove work area spills Debond bonded skin
Compatible Products Dynamite Combo Pull/Spin Start Assm: DYN .21 DYN6034 is compatible with¶ôǨDYN0897,¶ôǨDYN0899,¶ôǨDYN0990,¶ôǨDYN0992
Overview Compatible with any .12- to .15-size nitro engine, the 1/10-scale Air Filter System from Dynamite comes with everything you need in one ba...
View full details
Similar to RPM front A-arms, our rear arms eliminate nearly all of the A-arm slop typically found in stock Mini E-Revo rear A-arms, allowing camber...
View full details
These are the Traxxas Assembled Glued Slick Tires and 12-Spoke Blue Wheels for the LaTrax Rally Car.Features: Black and Blue colored Premounted sl...
View full details
This is the Traxxas pair of White GTR Long Spring Shocks with an Orange Compression Rating, 0.623 (2). These Spring Shocks fit the Traxxas Slash 4x...
View full details
This is a replacement Traxxas Finned 550 Motor Mount, and is intended for use with the Traxxas 1/16 Summit. Features: Factory Replacement Part Alu...
View full details
Rebuild kit, GTR composite shocks (x-rings, bladders, pistons, e-clips, shock rod ends, hollow balls) (renews 2 shocks) The GTR shock rebuild kit ...
View full details
This is the Driveshaft Assembly for the Traxxas 1/16 Slash 4WD. Features: Nylon construction Black in color Fits left or right  Includes: (...
View full details
This is the Traxxas Front and Rear Bumper for use on the Traxxas 1/16 Slash VXL 4WD. Features: Nylon construction Black in color Includes:One Fro...
View full details
Traxxas front suspension arm set for use on the 1/16 Slash VXL 4WD RTR. Constructed of black nylon. This package includes; One Upper Right Suspensi...
View full details
This is the optional aluminum motor mount plate for the Traxxas Slash 4x4.Features: 6061-T6 aluminum construction that’s anodized blue in colorIncl...
View full details
This is the Center Diff Housing for the Traxxas Slash 4X4 and 4X4 Platinum.Features: Black nylon, aluminum and steel constructionIncludes: Two hou...
View full details
This is a set of two Traxxas BFGoodrich Mud-Terrain TA Tires, Pre-Mounted on SCT Split-Spoke Wheels. These are intended for use on the front and re...
View full details
This is a set of two Traxxas Progressive Rate Rear Shock Springs, and are intended for use with the Traxxas Slash 4x4. The Slash 4X4’s fully adjust...
View full details
This is a Traxxas 52T, 32P Spur Gear for use on the centerDifferential of the Slash 4X4. Features M0.8 pitch52 toothBlack plastic constructionCompa...
View full details
This is the short RPM sensor for the XO-1 on-road car from Traxxas.Features: Functions with the Traxxas Link system to display motor RPMIncludes: S...
View full details
Traxxas Body Mount Posts XO-1 (2) Features: Black colored Includes: Two mount posts Two post pivots Two screw pins Fits: Traxxas XO-1 Traxxas ...
View full details
This is the gray Nylon chassis for the 2WD Traxxas Slash.Features: Gray composite nylon constructionIncludes: One chassis for the Traxxas SlashRequ...
View full details
This is the rear LED lights harness for use on the Traxxas Summit Truck RTR.Features: JST ConnectorIncludes: Rear Harness Six RED LED Lights Three...
View full details
This is a set of center harness lights, intended for use with the Traxxas Summit Monster Truck.
This is the center half shaft set for the Traxxas E-Revo.Features: Plastic construction that’s black in colorIncludes: Center half shafts (three in...
View full details
This is the front bumper and mount for the Traxxas Summit.Features: Black plastic with mounting hardwareIncludes: Front bumper and mountRequires: I...
View full details
These are the left and right gearbox halves for the Traxxas Nitro Jato Stadium Truck.Features: Nylon construction that’s black in colorIncludes: On...
View full details
These are the front left and right suspension arms for the Traxxas Nitro Jato Stadium truck.Features: Nylon construction that’s black in colorInclu...
View full details
Traxxas Resonator aluminum tuned pipe for Revo is specifically engineered to fit right in the chassis and compliment Revo's TRX 2.5R and 3.3R racin...
View full details
Traxxas replacement center wing mount for the optional Traxxas Revo series wing mount set. Constructed of black composite nylon. Replaces a worn or...
View full details
This is the replacement Optidrive Electronic Shifting Module for the Revo.This is the device that prevents reverse shifting while the vehicleis in ...
View full details
This is the Fuel Cap Pull Ring/Shut-Off Clamp set for the Traxxas Revo.FEATURES:Plastic constructionSimple, squeeze-clamp restricts fuel line for e...
View full details
Traxxas REVO racing vented steel brake disc. Revo already delivers class-leading braking performance, but this high performance vented steel brake ...
View full details
These are the Front and Rear Blue Aluminum Bulkhead Tie Barsfor the REVO from Traxxas.FEATURES:Blue anodixed aluminum (2.5mm thick)INCLUDES:One fro...
View full details
Traxxas inner and outer housing for the T-Maxx 2.5. Replacement EZ Start 2 housing that is used on the 2.5 T-Maxx. This is the black plastic EZ Sta...
View full details
FEATURES: Plastic construction Black in color INCLUDES: One Air Filter Housing One Foam Insert Element One Rubber Filter Base One Cable Tie SPECS: ...
View full details
This is a replacement flywheel nut from Traxxas.Features: Metal construction Used on the Traxxas TRX 2.5. engine Includes: Flywheel Nut
These are replacement cooling head protectors for the Traxxas 2.5 Engine. These attach to the top of the cooling head.Features: Black nylon constru...
View full details
TRA5215 Clutch bell (15-tooth)/5x8x0.5mm fiber washer (2)/ 5mm eclip(requires 5x11x4mm ball bearings part #4611) (1.0 metric pitch)
We invite you to join our mailing list to receive specials and promotions.
EMAIL:Â sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 10am to 3pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS
