RPM70375 Blue Front Left A-arms for the Traxxas Summit Revo
RPM
In response to repeated customer demands, we have a set of front left A-arms now available for the Traxxas Summit. Our front right A-arms for the T...
View full details
In response to repeated customer demands, we have a set of front left A-arms now available for the Traxxas Summit. Our front right A-arms for the T...
View full details
Many Traxxas electric vehicles have a motor that is dangerously exposed to impacts and damage from rear impacts or collisions. Our new rear Motor P...
View full details
This is a replacement Traxxas X-Maxx 13 Tooth Front Differential Pinion Gear. Features:Factory Replacement Part Includes:(1) Front Differential Pin...
View full details
Shock caps, GTX shocks/ spring perch/ adjusters/ 2.5x14 CS (2) (for 2 shocks) Pair of GTX shock caps with spring perches (2), adjustment rings (2)...
View full details
WHEEL HUBS, HEX (4) Set of four 12 mm hex wheel hubs Replacement part for these models: 1/18 LaTrax® Desert Prerunner 1/18 LaTrax® Teton®
This is the Traxxas Gearbox housing/ motor plate.. This is Traxxas part number 7590XPart Number: 7590X / TRA7590XFitsLaTrax SSTLaTrax Teton
This is the set of Traxxas Long GTR Shock Springswith 0.810 Pink Compression Rate.FEATURES:Steel construction, white in colorDab of paint on end of...
View full details
Traxxas pair of shock springs for the 1/16 Summit with a blue spring rate. Spring,shock(GTR) for 1/16 Summit. Requires: Installation onto shocks Sp...
View full details
This is a set of two Traxxas Progressive Rate Front Shock Springs, and are intended for use with the Traxxas Slash 4x4. The Slash 4X4’s fully adjus...
View full details
TRA6838X Shock tower, rear, 7075-T6 aluminum (blue-anodized) Optional Aluminum Rear Shock Tower for the Traxxas Slash 4x4 FEATURES: 7075-T6 blue an...
View full details
This is a set of two Traxxas Standard Compound Kumho Venture MT Tires, Pre-Mounted on SCT Split-Spoke Wheels. This tire set is intended for use on ...
View full details
This is a replacement Traxxas LED Light Front Harness. This package includes four clear LED's, as well as three small zip ties to help with install...
View full details
This is a pair of assembled and glued tires and wheels for the Traxxas Summit.Features: Canyon AT tires with angular lugs Geode chrome plated plas...
View full details
Traxxas motor mount is constructed of silver aluminum. Replaces damaged motor mount. Requires:Â Motor Mount Hinge Post Specs:Length:Â 58.2mm (2.29")W...
View full details
Traxxas Seal Kit/Receiver Box Slash Features: Prevents moisture and dirt from entering receiver box Includes: Silicone rectangle shaped O-ring S...
View full details
Traxxas Flat Wrench 8mm Blue Revo Features: Aluminum Construction Blue anodization Etched "Traxxas" and "8mm" logos Drilled hole on one end of ea...
View full details
Half shafts, center (internal splined (2)/ external splined (2)) (plastic parts only) Replacement front and rear center half shafts (plastic parts...
View full details
Traxxas Brake Pad Set Revo Features: Aluminum construction with fiber pads pre-glued Inlcudes: Two brake pads Fits: Traxxas Revo Traxxas T-Max...
View full details
Traxxas replacement right side electronics box for the Revo. Part attaches directly to the chassis. Black plastic. INCLUDED: One right electronics ...
View full details
This is the Traxxas Single Speed Conversion Kit. This Conversion Kit is compatible with the Traxxas T-Maxx 2.5 Nitro 4WD RTR.Features: All major c...
View full details
Nuts, 2.5mm nylon locking (12) Set of twelve 2.5 mm nylon locking nuts. Replacement part for these models: E-Revo® VXL Brushless Jato® Revo® Sla...
View full details
This is a pair of Traxxas Maxx tires and wheels.Features: Fits the 1/10 scale Traxxas E-Maxx, T-Maxx and Revo Wheels constructed of plastic, split...
View full details
This is the ring gear and parts for the Traxxas T-Maxx 4WD Radio Control Monster Truck. These ring and pinion gears are installed in the front diff...
View full details
FEATURES: Replaces missing or damaged hex wheel hubs Hubs are made of molded black plastic Axle pins are steel INCLUDES: Two Hex Wheel Hubs Two 2.5...
View full details
Traxxas clutch bells are made from durable steel for long-lasting performance. Available in a variety of sizes to fine tune your truck's gear ratio...
View full details
This is the replacement 20-tooth idler gear and shaft for the Traxxas E-Maxx 4WD RTR.Features: Steel construction that’s gun metal in color Replac...
View full details
These are the left and right differential housings for the Traxxas E-Maxx.Features: Constructed of plastic Replaces damaged or broken diff housing...
View full details
Steering blocks, Rustler®/Stampede®/Bandit (2), 6061-T6 aluminum (red-anodized)/ 5x11mm ball bearings (4) Traxxas aluminum steering blocks improve...
View full details
Screws, 2.5x10mm cap-head machine (hex drive) (6) Set of six 2.5x10 mm cap-head machine screws with hex-drive heads Replacement part for these mo...
View full details
Wing buttons (2)/ set screws (2)/ spacers (2)/ 3x8mm CS (2)
Suspension arms, (rear) (2) Standard rear suspension arms Replacement part for these models: Ford® F-150 Raptor Ford® F-150® Raptor Nitro Rustle...
View full details
Threaded rods (20/25/44mm 1 ea.)/ (1) 12mm set screw
Main diff with steel ring gear/ side cover plate/ screws (Bandit, Stampede, Rustler)
Half-shafts (internal-splined (2)/external-splined (2))/ metal U-joints (4) Set of two half shafts includes internal shafts (2) and external shaft...
View full details
This is a replacement Losi Pull-Start Assembly, and is intended for use with the Losi 5IVE-T 26cc gas engine.
Fr/R Body Post Set: 1:10 2wd Ruckus, Torment-In Store Only
Product Details These high-quality Set Screws provide direct replacement parts for your kit supplied items. Features Strong and durable steel f...
View full details
Product Details These high-quality Button Head Screws provide replacements for your kit supplied items. Features Strong and durable steel for l...
View full details
Product Details These high-quality Button Head Screws provide replacement parts for your kit supplied items. Features Strong and durable steel ...
View full details
Product Details This 6x45mm Steel Steering Post is the perfect spare part to carry in your RC tool box. Features Manufactured from super-tough ...
View full details
Product Details These high-quality Balls are the perfect part to carry in your RC tool box. Features Super-tough steel material for long-lastin...
View full details
TRA9537 Traxxas Steering blocks, left & right/ M4x0.7 NL (4)
This is a set of ten axle boot 5 mm drive pins for DBXL-E 2.0 by Losi.
Product Details This strong steel 10T Spiral Main Input Gear is the perfect part to carry in your RC tool box. Features Constructed from hard-weari...
View full details
Traxxas Drag Slash Rear Pre-Mounted Tires with Weld Wheels and 12mm Hex. These ultra-wide Mickey Thompson ET Drag Slicks feature an innovative carc...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL:Â sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 10am to 3pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS