RPM73759 FR BULKHEAD RED 2WD 1/10
RPM
One of the most highly sought-after RPM parts is finally here! The RPM Front Bulkhead for 1/10 scale Traxxas 2wd vehicles is the ultimate in design...
View full details
One of the most highly sought-after RPM parts is finally here! The RPM Front Bulkhead for 1/10 scale Traxxas 2wd vehicles is the ultimate in design...
View full details
Save 50%
We’???ve been repeated inundated with requests for a new color option for¶ôǨRPMparts and the most popular request by far has been¶ôǨred. When our c...
View full details
Are you looking to add some serious stability to your electric Rustler or Stampede 2wd? Look no further! RPM has a new set of wide front A-arms tha...
View full details
Product Details Key Features Interco® TSL SX Super Swamper® replica design Available in G8 (Rock Terrain) compound Made in the USA In The Bo...
View full details
Product Details This super-tough steel 14T MOD1 Pinion Gear is the perfect item to to carry as a spare in your RC tool box. Features Strong and...
View full details
This is replacement Progressive Rear Shock Springs for the 2WD Slash. Features: Metal construction Pink in color  Includes: (2) Shock Sprin...
View full details
This is the pair of two Traxxas Front/Rear Aluminum Driveshaft Assembly for the LaTrax Rally Car.Features: Blue colored Made of Aluminum replaces ...
View full details
These are the Black and Silver Pivot Balls for the Latrax Rally, SST and Teton Vehicles. Features:Black and Silver Pivot Balls Includes: (6) Black...
View full details
This is a replacement Traxxas GTR Shock Cap & Spring Retainer Set. These parts are compatible with Traxxas GTR Long and XX-Long shocks (TRA7461...
View full details
Rebuild kit, GTR long/xx-long shocks (x-rings, bladders, pistons, piston nuts, shock rod ends, hollow balls) (renews 2 shocks) The 1/10 scale GTR ...
View full details
This is a replacement Traxxas Low-CG Chassis, and is intended for use with the Traxxas 1/10 Rally Racer and the Slash 4x4 Ultimate 1/10 scale short...
View full details
These are the Front and Rear Body Mounts for theTraxxas Telluride 4x4 from Traxxas, TRAD91**.FEATURES:Constructed of plastic, black in colorINCLUDE...
View full details
This is a set of two Traxxas BFGoodrich Mud-Terrain TA Tires, Pre-Mounted on SCT Split-Spoke Wheels. These are intended for use on the front and re...
View full details
Stub axle, front, steel-splined constant velocity (1) Replacement steel front stub axle for Traxxas steel CV driveshafts (6851R). Accessory part ...
View full details
This is the Mounts for the Traxxas RPM Sensor (Nitro Engines). Features:  Plastic and metal construction  Includes:  (3) Different plasti...
View full details
This is a pair of Traxxas SCT Off-Road Racing Tires in S1 Compound with Foams Mounted and Glued on SCT Black Orange-Beadlock Dual-Profile Wheels fo...
View full details
Springs, front (white) (progressive rate) (2) Pair of white progressive-rate springs for Traxxas long Ultra Shocks are custom-wound to provide res...
View full details
CHASSIS, LOW CG (BLACK) Change up the color on your low-CG-equipped 2WD Slash with this black chassis. Low-CG chassis do not fit standard 2WD Slas...
View full details
This is the battery compartment door for the Traxxas E-Revo.Features: Nylon construction that is black in colorIncludes: One Battery Compartment Door
These are the differential and transmission gaskets for the Traxxas Nitro Jato Stadium Truck.Features: Rubber construction that’s black and blue in...
View full details
This is a set of rod ends for the Traxxas Revo. They are to be used on the rear toe-link rods only.Features: Plastic construction that’s black in c...
View full details
Traxxas optional red aluminum pushrods for the rocker arms for the REVO. These go between the Rocker Arms and the Lower Suspension Arms. **Must be ...
View full details
This is the Header Spring and Gaskets from Traxxas for the TRX 2.5, TRX 2.5R and the TRX 3.3 Engines FEATURES: Spring constructed of steel INCLUDE...
View full details
Traxxas pair of driveshafts, outside U-joint is lubricated and sealed by a rubber boot to protect it from dirt and grime U-joint pins are held capt...
View full details
Traxxas rear plastic skidplate for the T-Maxx attaches to and protects chassis and supports the rear bulkhead. Skidplate is gray in color INCLUDES:...
View full details
TRA4914R Body mount posts, front (2)/ body mount, rear/ body mount screw pins (4)
This is a set of two replacement slipper pressure rings from Traxxas. These are metal rings with a notch in them and are installed on either side t...
View full details
Flywheel (N. Rustler/Sport/Stampede/T-Maxx/Revo/Jato/Slayer) Replacement part for these models: Nitro Rustler® Revo® T-Maxx® TRX® 2.5R TRX® 3.3 T...
View full details
Air filter (complete with rubber base & foam insert) Replacement part for these models: TRX® Pro .15 Accessory part for these models: TRX® ...
View full details
Traxxas Cap Head Machine Screw 3x32mm (6) Features: Black finish Steel construction Cap head design Includes: (6) 3X32mm cap head machine screws...
View full details
Traxxas six pack of 3X28mm cap head screws have a zinc finish and metal construction. Includes: (6) 3X28mm cap head screws(6) lock washers(6) washe...
View full details
TRA3959 Spur gear, 62-tooth (0.8 metric pitch, compatible with 32-pitch)
These are the replacement bulkhead cross braces for the Traxxas E-Maxx. These Braces are located in between the bumper mounts.Features: Black nylon...
View full details
Gear, 26-T pinion (48-pitch) (fits 3mm shaft)/ set screw 26-tooth pinion gear (48-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pi...
View full details
This is a replacement Losi 12x24x6mm Outer Axle Bearing Set, and is intended for use with the Losi 5IVE-T.
Product Details This high-quality Button Head Screw is manufactured from super-tough material for long-lasting durability. Features: Button hea...
View full details
OVERVIEW: This XT90 Male to Female T-Plug Charging Adaptor allows you to charge your XT90 equipped battery back using a charger that has a T-Plug o...
View full details
Product Details These super-strong CVD Axles will provide a strong and reliable direct replacement part for your kit items. Features Super-toug...
View full details
TRA9579R Traxxas Ring gear, differential/ pinion gear, differential (machined) (front or rear)
Traxxas Body, Maxx V2 (clear, requires painting)/ window masks/ decal sheet (fits Maxx V2 with extended chassis (352mm wheelbase))
Product Details This high-quality Spur Gear is manufactured from hard-wearing, durable material Features Precision manufactured gear teeth fo...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL:Â sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 10am to 3pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS