Servo, digital high-speed, metal gear (ball bearing), waterproof The digital 2075R High-Speed Metal Gear Servo features a waterproof case for worr...
View full details
LED lights, power supply (regulated, 3V, 0.5-amp)/ 3-in-1 wire harness The waterproof LED power supply plugs directly into the accessory tap on ...
View full details
aving spare hardware is a smart choice, this is a replacement LaTrax Rally Screw Set. This set includes the necessary replacement hardware for the ...
View full details
This is the clear body for use on the Traxxas 1/16 E-Revo VXL 4WD Brushless RTR.Features: Clear plastic constructionIncludes: Clear 1/16 E-Revo Bo...
View full details
Features:Hardened plastic constructionBlack in colorIncludes:One left caster blockOne right caster blockRequires:Installation on SlashTechnical Spe...
View full details
This is the Traxxas 30cc tube of Marine Grease.Features: 1 oz (30cc) tube Roll-up toothpaste-style tube Includes:One 1 oz tube of Traxxas marine ...
View full details
Pipe coupler, molded (for use with pipes 5152 (T-Maxx®) & 4452R) (TRX® 2.5, 2.5R, 3.3) Blue pipe coupler for use with pipes 5152 and 4452R exh...
View full details
Roller clutch/ 6x8x0.5 TW (1) (also called one-way bearing) (TRX® 2.5, 2.5R, 3.3) Roller clutch (one-way bearing) includes 6x8x0.5 washer. Fits TR...
View full details
Screws, 2.5x8mm cap-head machine (6) Set of six 2.5x8 mm cap-head machine screws with hex-drive heads Replacement part for these models: 1/16 E-...
View full details
Screws, 3x8mm flat-head machine (hex drive) (6) Set of six 3x8 mm flat-head machine screws with hex-drive heads Replacement part for these models...
View full details
Screws, 4x15mm countersunk machine (hex drive) (6)
Gear set (for 2080 waterproof micro servo) Replacement gear set for standard 2080 micro servo. Does not fit 2080A or 2080X servos.
Gear, 20-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears) 20-tooth pinion gear (1.0 metric pitch) fits...
View full details
Ball bearings, black rubber sealed (6x13x5mm) (2) Pair of 6x13x5 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal b...
View full details
Driveshaft assembly, front & rear, 6061-T6 aluminum (blue-anodized) (2) Replace the standard composite driveshafts in your 1/18 scale LaTrax Pr...
View full details
Slash 4X4 Low-CG (Low Center of Gravity) Conversion Kit Everything to convert your Slash 4X4 Performance-proven by the Slash 4X4 Ultimate and 1/1...
View full details
Rod ends, Revo® (large) with hollow balls (12) Set of twelve large Revo®-style rod ends with hollow balls. Replacement part for these models: 4-...
View full details
Screws, 4x10mm countersunk machine (hex drive) (6)
Traxxas Oil, shock (80 wt, 1,000 cSt, 60cc) (silicone)
This is a pair of Traxxas pre-assembled rims and tires, the 3.8" 6 spoke wheels have a 17mm splined hex and the Talon EXT tires are pre-glued to th...
View full details
Mount, tie bar, front (1)/ rear (1) Front and rear tie bar mounts Replacement part for these models: X-Maxx® Ultimate X-Maxx® XRT® Ultimate XRT®
TRA5459 Revo T-Maxx Rubber Driveshaft Boots(2) Boots, driveshaft (rubber) (2) Replacement part for these models: E-Revo Brushless E-Revo Revo T-Maxx
Ball Bearing, black rubber sealed (17x26x5) (2) Pair of 17x26x5 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal be...
View full details
Shock caps, aluminum (red-anodized) (4) (fits all Ultra Shocks) Aluminum shock caps are great way to boost the durability and style of any Traxxas...
View full details
Screws, 2.5x12mm cap-head machine (6) Set of six 2.5x12 mm cap-head machine screws with hex-drive heads Replacement part for these models: 1/16 ...
View full details
4000mah 11.1v 3-Cell 25C LiPo Battery Traxxas Certified iD®-equipped LiPo batteries provide the punch and on-demand power to reach the top spee...
View full details
Driveshaft, steel constant-velocity (heavy duty, shaft only, 160mm) (1) (replacing #7750 also requires #7751X, #7754X and #7768 or #7768R) Heavy-d...
View full details
This is a pair of 173mm molded composite plastic toe links for the Traxxas X-Maxx Monster Truck. Features: Molded composite plastic construction S...
View full details
This is a replacement Traxxas Rear Differential Housing, and is intended for use with the Traxxas Slash 4x4 short course truck. Features: Nylon Co...
View full details
This is an optional Traxxas CV Driveshaft Set, and is intended for use with the Traxxas T-Maxx 3.3, Revo 3.3, E-Maxx and E-Revo trucks. Traxxas Ste...
View full details
This is the Exo-carbon wing for the Traxxas Revo 3.3. This part attaches to the rear of the body.Features: Plastic construction, exo-carbon finish ...
View full details
Traxxas tune pipe coupler and exhaust deflector set for the Revo. Allows for a connection between the Exhaust Header and the Tune Pipe. Silicone co...
View full details
Bottle, fuel filler (500cc) The fuel bottle holds 500 cc of fuel and includes a long, bent, blue-anodized spout for easy filling. A rubber cap and...
View full details
Spur gear, 76-tooth (48-pitch) (for models with Torque Control slipper clutch) 76-tooth spur gear (48-pitch) for Torque Control slipper clutches...
View full details
ALUMINUM CASTER BLOCKS: Traxxas aluminum caster blocks improve the appearance, ruggedness, and control on the your Traxxas model. In addition to t...
View full details
Wiring harness for RX Power Pack, Traxxas® nitro vehicles except Revo® (includes on/off switch and charge jack) This custom wiring harness simplif...
View full details
XL-2.5™ Waterproof FWD/REV ESCwith Low Voltage Detection (LVD) Designed and engineered by Traxxas, the XL-2.5 Electronic Speed Control delivers smo...
View full details
Traxxas Top Fuel Power Plus 33% Nitro Fuel (Gallon)
Battery, Series 5 Power Cell, 5000mAh (NiMH, 7-C flat, 8.4V) Traxxas premium 5000-series Power Cell NiMH battery packs provide the highest capa...
View full details
Heavy-Duty Suspension Arms Heavy-duty suspension arms for Stampede®, Rustler®, and more feature our latest proprietary composite material. Traxx...
View full details
This is the Traxxas Transmission Cush Drive Elastomer Damper for the Traxxas X-Maxx. This system requires the Cush Input Shaft (TRA7786X). Includes...
View full details
This is a Traxxas front and rear Skidplate.Features: Molded composite plastic construction and reduces damage to underside of chassis and other com...
View full details
Drive hub, center, rear (1)/ 4x3 GS (1) Rear center drive hub with 4x3 mm grub screw Replacement part for these models: Ford Fiesta® ST Rally Fo...
View full details
Motor coupler, collet style/ GS 4x3 (with threadlock) (1)/ Wrench, 10mm (2) Collet-style motor coupler with 4x3 stainless grub screw with applied ...
View full details
Carrier, differential (heavy duty)/ x-ring gaskets (2)/ ring gear gasket/ bushings (2)/ 6x10x0.5 TW Heavy-duty differential carrier with x-ring ga...
View full details
Nuts, 4mm nylon locking (10) Set of ten 4 mm Nylon locking nuts Replacement part for these models: Bandit® VXL Bandit® BIGFOOT® No. 1 Officially...
View full details
TRA5042 Traxxas Oil, differential (1M weight) (standard)
LiPo Cell Voltage Checker/Balancer (2968X)The Traxxas LiPo Cell Voltage Checker/Balancer connects to Traxxas LiPo batteries using the included bal...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 4pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS
