Traxxas left and right rear suspension arms are constructed of black plastic. Includes: Two suspension arms. Specs: Length: 62.0mm (2.443")Width: 3...
View full details
This is the front bumper and mount for the Traxxas 1/16 scale Rally VXL.Features: Black plastic constructionIncludes: One Mount and BumperRequires:...
View full details
Traxxas Wheel Adapter Features: Allow the use of Aftermarket Wheels to be Used. Includes: Four Wheel Adapters Part Compatibility: Traxxas Nit...
View full details
This is a slipper pressure plate and hub for the Traxxas X-Maxx Monster Truck. Features: Cast metal construction Installs on transmission input sh...
View full details
FEATURESHardened steel constructionSplined to hold the pressure plate, slipper clutch and spur gearassemblies in place INCLUDESTransmission Input S...
View full details
These are the optional wheel nut washers for the LaTrax Teton Monster Truck from Traxxas.Features: Green colored Made of aluminum For the LaTrax T...
View full details
These are the optional wheel nut washers for the LaTrax Teton Monster Truck from Traxxas.Features: Blue colored Made of aluminum For the LaTrax Te...
View full details
This is the Long Chassis for the Traxxas 1/18 LaTrax Desert Prerunner. Includes: (1) Chassis
This is the Traxxas Camber rods, 2-degree/3-degree (6 each). This is Traxxas part number 7539Part Number: 7539 / TRA7539FitsLaTrax Rally
Traxxas 7522 Latrax Rally ChassisThis is the Chassis for the Latrax Rally Car from Traxxas.FEATURESMolded fiber composite constructionINCLUDESChass...
View full details
Box, receiver (sealed)/ foam pads/ 2.5x12mm CS (2)/ 3x6mm CS (2)/ 3x12mm BCS (2) Sealed receiver box for vehicles equipped with the low-CG 4X4 cha...
View full details
This is the Traxxas pair of Nerf Bars for the 1/10 scale Rally VXL, (2).Features: Black colored Made of plastic For the Traxxas Rally VXL Include...
View full details
This is an optional Traxxas Complete LED Light Kit. Package includes the power supply, chrome lightbar, wire ties, mounts, 2-red/4-clear roof light...
View full details
This is a pair of Canyon AT 2.2" Tires with foam inserts mounted on Geode Chrome, Blue Beadlock Wheels from Traxxas. Features: Canyon AT tires ...
View full details
This is a pair of blue rate springs for the GTR shocks used on the Traxxas Gravedigger off-road truck.Features: Steel construction with nickel fin...
View full details
This is the Traxxas ExoCage, 1/16th Summit (includes mounting hardware). This is Traxxas part number 7220Part Number: 7220 / TRA7220Fits1/16 Summit...
View full details
These are the pushrods and hollow balls for use on the Traxxas 1/16 E-Revo VXL 4WD RTR.Features: Molded composite construction that’s red in colorI...
View full details
Traxxas shock bodies for use on the GTR Shocks. Constructed of black molded composite material.Requires: Installing all shock components into shock...
View full details
Traxxas Steel Constant Velocity Driveshafts are designed to handle the extreme horsepower and articulation.The U-joint pins are held captive by a h...
View full details
This is a set of two Traxxas Standard Compound Kumho Venture MT Tires, Pre-Mounted on SCT Split-Spoke Wheels. This tire set is intended for use on ...
View full details
This is a pair of SCT Split Spoke Wheels in Black from Traxxas.FEATURES:Fits front and rear of the Slash 4x4 and the rear of the 2 wheel drive Slas...
View full details
These are the Traxxas Heavy Duty External and Internal Splined Half Shafts with metal U-Joints for the Telluride 4x4.Features: Black and silver/gr...
View full details
This is the Center Driveshaft for the Traxxas 1/10 scale Telluride 4x4.FEATURES:Plastic construction, blue in colorINCLUDES:Center Driveshaft with ...
View full details
Traxxas External Splined Half Shaft. This is the male end half shaft that works with the CVD type driveshafts. Package includes one half shaft.
This is a replacement On-Board Audio System Sound Output Module from Traxxas. Includes: (1) Sound Output Module
This is the Large Knurled Flywheel from Traxxas.FEATURES:Enables Traxxas glow powered vehicles to be started with a starter boxAluminum constructio...
View full details
Save 45%
This is a replacement Traxxas Temperature & Voltage Telemetry Sensor, and is intended for use with the Traxxas XO-1. Temperature data is critic...
View full details
This is the Input Shaft/ PinFor the Traxxas Cush drive outputFEATURES:Steel constructionINCLUDES:One input shaftOne pinCOMMENTS:This part is for th...
View full details
Traxxas Motor Adapter/GS 3x30mm XO-1 Features: Metal construction, blue colored Includes: One motor adapter
Traxxas Motor Mount XO-1 Features: Aluminum construction, anodized blue in color Includes: Motor Mount with Instruction Sheet Fits: Traxxas XO-1
Traxxas Center Bearing Carrier/Bushings XO-1 (2)
This is a Traxxas 6061-T6 Aluminum Center Driveshaft for the XO-1.
This is a replacement Traxxas Aluminum Rear Axle Carrier Set, and is intended for use with the Traxxas X0-1.
This is the Splitter Extension for the Traxxas XO-1 On-Road Car, TRAD45**.FEATURES:Molded plastic constructionINCLUDES:Splitter Extension with two ...
View full details
These are the Battery Cups for the Traxxas XO-1 On-Road Car, TRAD45**.FEATURES:Molded plastic constructionINCLUDES:Two Battery Cup Sections
This is a pair of Front and Rear Bulkhead Tie Barsfor the Traxxas XO-1 On-Road Car from Traxxas, TRAD45**.FEATURES:Aluminum construction, anodized ...
View full details
Wheels, SCT Split-Spoke Satin Chrome, Black, Satin Chrome Beadlock Style, Dual Profile (2.2" Outer, 3" Inner) (2) (4WD F/R, 2WD Rear) Compatibil...
View full details
This is a set of two Traxxas BFGoodrich Mud-Terrain T/A KM2 Tires, Pre-Mounted on Split-Spoke SCT Wheels. These are intended for use on the front a...
View full details
This is a set of two Traxxas BFGoodrich Mud-Terrain TA Tires, Pre-Mounted on SCT Split-Spoke Wheels. These are intended for use on the front of the...
View full details
These are the front satin chrome wheels for the 2WD Traxxas Slash Short Course Racing Truck RTR.Features: Plastic construction with satin chrome f...
View full details
This is a pack of two Traxxas 2.2/3.0 Pre-Mounted SCT Rear Wheels & Tires. Add instant "beadlock" style to your Slash or Slayer. The beadlock t...
View full details
This is a pack of two Traxxas 2.2/3.0 Pre-Mounted SCT Rear Wheels & Tires. Add instant "beadlock" style to your Slash or Slayer. The beadlock t...
View full details
These are the Rear Satin Chrome Wheels for theTraxxas Slash Short Course Racing Truck RTR (TRAC43**).FEATURES:Plastic constructionSatin chrome fini...
View full details
Traxxas Water Cooling Jacket Spartan Features: Rubber construction Includes: Water Motor Cooling Jacket Fits: Traxxas Spartan
We invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 4pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS
