TRA6837 Steering blocks, left & right
TRAXXAS
Steering blocks, left & right Steering blocks, left & right Replacement part for these models: Ford Fiesta® ST Rally Ford® Fiesta® ST Ra...
View full detailsSteering blocks, left & right Steering blocks, left & right Replacement part for these models: Ford Fiesta® ST Rally Ford® Fiesta® ST Ra...
View full detailsGear, 18-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears) 18-tooth pinion gear (1.0 metric pitch) fits...
View full detailsThis is a Traxxas front lower bulkhead.Features: One-piece molded composite plastic construction Holds the steering, differential, skidplate and l...
View full detailsThis is a replacement Traxxas Differential Gear Set, differential (output gears (2), spider gears (2), spider gear shaft, and carrier support) and ...
View full detailsXL-5 Electronic Speed Control, waterproof (land version, low-voltage detection, fwd/rev/brake)
Screws, 3x20mm button-head machine (hex drive) (6) 3x20 mm button-head machine screws with hex drive heads. Set of six. Replacement part for thes...
View full detailsSway bar kit (front and rear) (includes front and rear sway bars and adjustable linkage) Fine-tune your model for high-grip racing with this track...
View full detailsScrews, 3x12mm button-head machine (hex drive) (6) 3x12 mm button-head machine screws with hex drive heads. Set of six. Replacement par...
View full detailsBumper, front Front bumper Replacement part for these models: X-Maxx® Ultimate X-Maxx®
Top drive gear, steel (22-tooth) Replacement 22-tooth steel top drive gear for standard Magnum 272 transmission Replacement part for these models...
View full detailsTires & wheels, assembled, glued (X-Maxx® black wheels, paddle tires, foam inserts) (left & right) (2) X-Maxx® paddle tires offer unbeatab...
View full detailsHousings, differential, front Front differential housing halves Replacement part for these models: Ford Fiesta® ST Rally Ford® F-150® Raptor R™ ...
View full detailsDriveshaft assembly (1), left or right (fully assembled, ready to install)/ 4x15mm screw pin (1) The fully-assembled driveshaft comes complete and...
View full detailsAir filter and pre-filter inserts, foam (high-volume) (3) (pre-oiled, assembled) (use with #5266 filter body) (TRX® 2.5, 2.5R, 3.3) Pack of three ...
View full detailsScrews, 3x6mm button-head machine (hex drive) (6) 3x6 mm button-head machine screws with hex drive heads. Set of six.
Traxxas Premium Shock Oil (50 wt) Traxxas premium 50 wt silicone shock oil is the perfect solution for all your RC needs. This 100% pure silicon...
View full detailsShocks, GTR xx-long blue-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2) 1/10 scale XX-long GTR shocks represe...
View full detailsThis is a replacement LaTrax 3.7V 650mAh 1C LiPo battery pack for use on the La Trax Alias quad-copter. Specifications: Length: 2.08" (53mm) Width:...
View full detailsTraxxas 7730 X-Maxx Right Lower Suspension Arm This is a replacement Traxxas X-Maxx Right Lower Suspension Arm. Features: Factory Replacement Part...
View full detailsBody mounts, front & rear/ 3x15mm BCS (1)/ 3x12mm shoulder screw (2)/ 3x10mm flat-head machine screw (6)/ 3x15mm flat-head machine screw (2) F...
View full detailsSlipper pressure plate & hub (aluminum alloy) Replacement standard-duty aluminum alloy pressure plate and hub. Use with 5552X standard-duty cl...
View full detailsVelineon 3500 Brushless Motor The Velineon® 3500 kV brushless motor uses ultra high-temperature Neodymium magnets, high-speed ball bearings, and a...
View full detailsHigh-Torque Waterproof Servo• 80 oz-in torque• Transit time 0.23 sec/60° Replacement part for these models: Bandit® BIGFOOT® No. 1...
View full detailsShocks, GTR long blue-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2) 1/10 scale long GTR shocks represent the...
View full detailsGear set, differential, metal (output gears (2)/ spider gears (4)/ ring gear, 35T (1)/ 2x14.8mm pin (1)) Replace the standard plastic gears in you...
View full detailsDriveshaft assembly, front or rear (2) Set of two driveshaft assemblies fit front or rear Replacement part for these models: 1/18 LaTrax® Desert...
View full detailsTRA3678A Wheelie bar, assembled (green) (fits Stampede, Rustler, Bandit series)
Silicone diaphragms (4) Silicone diaphragms (4) Replacement part for these models: 4-Tec® 2.0 AWD Chassis 4-Tec® 2.0 Brushless AWD Chassis 4-Tec...
View full detailsThis is the Fox Edition Body for the Traxxas Slash and Slash 4x4.FEATURES:Molded plastic constructionTrimmed and painted with decals appliedBlack a...
View full detailsSuspension pin retainer (4) Set of four replacement suspension pin retainers for hardened steel suspension pins. Replacement part for these model...
View full detailsBall bearings, blue rubber sealed (8x12x3.5mm) (2) Pair of 8x12x3.5 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime...
View full detailsNerf bars, chassis (black) Pair of black chassis nerf bars Replacement part for these models: Drag Slash 1967 Chevrolet® C10 Truck Drag Slash Fo...
View full detailsScrews, 4x12mm button-head machine (hex drive) (6) Set of six 4x12 mm button-head machine screws with hex-drive heads Replacement part for these ...
View full detailsUltra Shocks (grey) (long) (complete w/ spring pre-load spacers & springs) (2) Traxxas oil-filled Ultra Shocks utilize X-rings for a perfect s...
View full detailsPlanetary gear differential with steel ring gear (complete) (fits Bandit, Stampede®, Rustler®) Complete planetary gear differential (unassembled) ...
View full detailsShoulder screws, Ultra Shocks (3x12 hex drive) (6) Set of six 3x12 mm shoulder screws (shock attachment screws) with hex-drive heads. Replacement...
View full detailsHold down, battery/ hold down retainer/ battery post/ foam spacer/ angled body clip Battery hold down and hold down retainer with battery post, ...
View full detailsTurnbuckles, camber links, 58mm (assembled with rod ends and hollow balls) (2) 58 mm camber links come assembled with rod ends and hollow balls. ...
View full detailsDriveshafts, rear, steel-spline constant-velocity (complete assembly) (2)
Bulkhead, front (upper and lower) Front upper and lower bulkhead halves Replacement part for these models: Maxx® Slash® Maxx®
This is a rear bumper for the Traxxas X-Maxx Monster Truck. Shield your vehicle from the damages of an impact from behind with this rear bumper.Fea...
View full detailsThis is a Traxxas Aluminum Center Driveshaft Assembly.Features: Aluminum construction with natural silver colored finish Double sided steel gear m...
View full detailsGear set, differential (output gears (2)/ spider gears (2)/ spider gear shaft/ diff carrier support) Differential gear set include output gears (2...
View full detailsTraxxas Slipper Pressure Plate & Hub Alloy Revo Features: Aluminum construction Includes: One slipper pressure plate One slipper hub Part C...
View full detailsHeat sink, Velineon® 380 brushless motor, aluminum (blue-anodized) Add the blue-anodized aluminum heat sink to your Velineon 380 brushless motor t...
View full detailsCarriers, stub axle (rear) (2) Standard rear stub axle carriers (2) Replacement part for these models: Ford Fiesta® ST Rally Ford® Fiesta® ST Ra...
View full detailsWheel nuts, splined, 17mm, serrated (blue-anodized) (4) Set of four 17 mm wheel nuts are serrated for extra bite on the wheel to keep them snug no...
View full detailsSuspension arm set, front (includes upper right & left and lower right & left arms) Front suspension arm set includes upper right & le...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
MISSISSAUGA LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 5pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS