TRA7477 Cover, gear/ wire retainer
TRAXXAS
This is a replacement Traxxas Gear Cover, and is intended for use with the Traxxas 1/10 Rally. Features:Factory Replacement Gear Cover Includes:(1...
View full details
This is a replacement Traxxas Gear Cover, and is intended for use with the Traxxas 1/10 Rally. Features:Factory Replacement Gear Cover Includes:(1...
View full details
These are the left or right half shafts for use on the Traxxas 1/16 E-Revo VXL 4WD RTR.Features: Nylon construction that’s black in colorIncludes: ...
View full details
This is the Traxxas pair of Composite GTR Shocks for the Traxxas Rally VXL.Features: Black in color Composite construction Fully assembled - with ...
View full details
This is the Traxxas set of four 12mm Blue Anodized Aluminum Hex Wheel Adapters. With Traxxas’ new hex wheel adapters it’s now possible to add the s...
View full details
This is a pair of Rear Progressive Rate White Shock Springs forthe Traxxas Slash 4x4 Vehicles. Features White in colorSteel constructionProgressive...
View full details
This is the Traxxas Front Heavy Duty Driveshaft Assembly for the Telluride 4x4.Features: Black and silver/grey colored Made of tough plastic and s...
View full details
This is a replacement Traxxas Differential Output Shaft Set, and is intended for use with the Traxxas XO-1 1/7 Scale vehicle. This replacement work...
View full details
This is a replacement Traxxas Front Bumper/Skidplate Set, and is intended for use with the Traxxas Stampede 4X4. Features:Factory Replacement Set I...
View full details
This is the rear suspension arm guards for the Stampede and Slash 4x4.Features: Black plastic constructionIncludes: Two Rear suspension arm guards...
View full details
TRA6715 Stampede 4X4 Body Mount (1)/ Body Mount post (2) (front) Replacement part for these models: Stampede 4X4 Unassembled Kit Stampede 4x4 VX...
View full details
This is the Traxxas Telemetry Expander Mount for the XO-1, E-Revo and Summit.Features: Made of durable material For the Traxxas XO-1, Traxxas E-Re...
View full details
This is the Traxxas Telemetry Expander Mount for the Slash, Stampede 4x4, and Rally.Features: Made of durable material For the Traxxas Slash, Trax...
View full details
TRA6534 Telemetry trigger magnet holder/ magnet 5x2mm (1)
Traxxas package of four 17mm hub retainers. This is the new hub retainer pin that is used on the new TRA5853X & TRA6856X 17mm wheel adapter ass...
View full details
Traxxas Stuffing Tube (Assembled w/Liner) DCB M41Features:Holds propeller shaft/flex cable in placeMetal constructionIncludes:Stuffing Tube with Liner
Shift Linkage (Includes: Ball Collar, Spring, Ball Cup, Servo Horn, Linkage Wire)/ Shift Servo Mount/ 3x8mm BCS (2) Replacement Part For: Summit...
View full details
These are Traxxas 32 Pitch Hardened Steel Pinion Gears. These gears are used for various Traxxas models and feature 5mm Bore center hole, compatibl...
View full details
Gear, 14-T pinion (0.8 metric pitch, compatible with 32-pitch) (hardened steel) (fits 5mm shaft)/ set screw 14-tooth pinion gear (32-pitch) fits 5...
View full details
This is the chassis for the Traxxas E-Revo 4WD Monster Truck RTR.Features: Nylon construction that’s grey in color Installed foam pads Also fits t...
View full details
This is the steering bellcrank set for the Traxxas Nitro Jato Stadium Truck.Features: Nylon construction that’s gray in colorIncludes: Left and Ri...
View full details
Traxxas’ new aluminum turnbuckles make it possible for R/C hobbyists to dress up their Jato™ and save weight at the same time! These turnbuckles co...
View full details
This is the Traxxas set of four Assembled Anodized GTR Shocks for the Traxxas Revo/E-Revo/Summit. Features: Fully assembled TiN coated shafts Hard...
View full details
These are the diff and trans drive yokes for the Traxxas T-Maxx 3.3.Features: Black plastic constructionIncludes: Two drive yokes Two 4x15mm Yoke ...
View full details
Traxxas primary forward and reverse gears for the Traxxas T-Maxx 3.3. Gears are constructed of steel and plastic. This package includes;One Plasti...
View full details
This is the optional two speed close ratio gear set for the Traxxas Revo. Only Revo offers the ability to custom tailor the 2-speed gear ratios for...
View full details
This is a 5.1oz (150cc) complete fuel tank from Traxxas. Holds and distributes the fuel to the carb.Features: Plastic construction Tight spring on...
View full details
TRA5360 Engine mount (complete assembly)/ 3x28mm CS with washers (2)/ 3x10 CS with washers (10)
Toe link, 5.0mm steel (front or rear) (2) Pair of steel toe links fit front or rear. Rod ends sold separately. Replacement part for these models:...
View full details
This is the Traxxas left electronics box for the Traxxas Revo 3.3.Features: Constructed of plastic Holds the high torque and micro servos for the ...
View full details
Guards,Steering Servo:Revo, Revo 3.3,SLY (2) These are the replacement Steering Servo Guards forthe Traxxas Nitro Revo Monster Truck. Features Nylo...
View full details
These are the rear turnbuckles/toe links for the Traxxas 3.3 T-Maxx.Features: Constructed of steel in a polished natural finishIncludes: Two Rear T...
View full details
These are the front turnbuckles/toe links for the Traxxas 3.3 T-Maxx.Features: Constructed of steel in a polished natural finishIncludes: Two Front...
View full details
This is a forward only shaft and gear for the Traxxas T-Maxx. This converts the T-Maxx to forward only.Features: Black and white in colorIncludes: ...
View full details
Traxxas stock replacement differential gear set for the T-Maxx. Stock Replacement Diff Gear Set for the Traxxas T/E Maxx. These gears can also be r...
View full details
This is the Traxxas set of X-Long Big Bore Shocks for the Traxxas T-Maxx. These shock bodies and shock caps are made of hard anodized, Teflon coate...
View full details
These are the replacement hinge pin screws for the Traxxas T/E-Maxx. The hinge pins hold the suspension arms to the bulkheads.Features: Durable ste...
View full details
Traxxas left and right rear bulkheads for the T-Maxx 3.3 fastens to rear skidplate and holds rear diff in place. Constructed of hardened plastic IN...
View full details
This is the shock tower for the all versions of the Traxxas T-Maxx. This is for rectangular body posts.Features: Plastic constructionIncludes: Shoc...
View full details
Features: Black plastic, slipper clutch style spur gear Includes: one 72 tooth spur gear Technical Specifications: Tooth: 72Pitch: 32
Traxxas clutch bells are made from durable steel for long-lasting performance. Available in a variety of sizes to fine tune your truck's gear ratio...
View full details
Traxxas clutch bells are made from durable steel for long-lasting performance. Available in a variety of sizes to fine tune your truck's gear ratio...
View full details
Big Bore shocks (XX-long) (hard-anodized & PTFE-coated T6 aluminum) (assembled with TiN shafts) w/o springs (rear) (2)
Big-bore shocks (long) (hard-anodized & PTFE-coated T6 aluminum) (assembled with TiN shafts) w/o springs (2) Set of two long Big Bore shocks p...
View full details
Screws, 4x25mm button-head machine (hex drive) (6)
We invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 4pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS