TRA5526R Antenna crimp nut, aluminum (red-anodized)/ antenna nut tools
TRAXXAS
This is the Traxxas Anodized Aluminum Antenna Crimp Nut. This Antenna Crimp Nut is red colored and compatible with the Traxxas Slash 4x4, Stampede ...
View full details
This is the Traxxas Anodized Aluminum Antenna Crimp Nut. This Antenna Crimp Nut is red colored and compatible with the Traxxas Slash 4x4, Stampede ...
View full details
Traxxas flat, open-end 5mm wrench for the Revo. Traxxas flat, open-end 5mm wrench for the Revo is constructed of aluminum. with blue anodization. E...
View full details
This is a replacement Traxxas Variable Damping Kit, intended for use with the GTR shocks. This kit includes twelve shock pistons and four flat meta...
View full details
This is the Traxxas set of four Assembled Anodized GTR Shocks for the Traxxas Revo/E-Revo/Summit. Features: Fully assembled TiN coated shafts Hard...
View full details
This is a set of two replacement half shaft drive assemblies for the Traxxas Revo monster truck. These drive shafts are used for the front and rear...
View full details
This is a replacement opti-drive sensor assembly for the Traxxas Revo monster truck. This is the sensor that attaches to the transmission and deter...
View full details
This is the front and rear differential housing for the Revo from Traxxas.Features: Durable black nylon constructionIncludes: One diff housing (2 p...
View full details
The Revo©-Spec Torque-Control slipper clutch upgrade kit fits T-Maxx¶© Classic, S-Maxx, and SportMaxx trucks equipped with the original T-Maxx styl...
View full details
This is the Traxxas steering servo cover plate for the Traxxas Revo 3.3.Features: Nylon construction that is black in colorIncludes: One Steering S...
View full details
TRA5245X Pipe coupler, molded (black)/ exhaust deflecter (rubber, black)/ cable ties, long (2)/ cable ties, short (2)
Traxxas left and right rear bulkheads for the T-Maxx 3.3 fastens to rear skidplate and holds rear diff in place. Constructed of hardened plastic IN...
View full details
This is the optional single motor plate for the Traxxas E-Maxx 16.8V RTR.Features: Aluminum construction that is blue in color Designed for a clea...
View full details
These are plastic washers from Traxxas. This will work of the Nitro Rustler.Features: Plastic washersIncludes: Ten WashersRequires: Traxxas Nitro R...
View full details
This is a set of two replacement stub axle carriers from Traxxas. These stub axle carriers mount to the rear control arms, and support the rear axl...
View full details
This is a replacement Traxxas ESC/Receiver Mounting Plate, intended for use with the installation of the Traxxas XL-5 or XL-10 Electronic Speed Con...
View full details
Turnbuckles (62mm) (front tie rods) (2) Pair of 62 mm turnbuckles (front tie rods) Replacement part for these models: Bigfoot® Officially Licens...
View full details
Screws, 4x15mm button-head machine (hex drive) (6)
Screws, 4x20mm button-head machine (hex drive) (6)
Head screws, 3x12mm cap-head machine (hex drive) (6) (TRX® 2.5, 2.5R, 3.3) 3x12 mm cap-head machine screws with hex drive heads. Set of six. Repl...
View full details
Screws, 3x10 button-head machine (hex drive) (stainless steel)(6)
Suspension arms (front) (2) Standard front suspension arms Replacement part for these models: Bandit® VXL Bandit® Drag Slash 1967 Chevrolet® C10...
View full details
Screws, 2.5x12mm countersunk machine (hex drive) (6)
TRA9595 Traxxas Sway bar kit, Sledge (front and rear) (includes front and rear sway bars and linkage)
TRA7774A Traxxas Sledgehammer Tires on Black Chrome Wheels for X-Maxx (2)
This is a front or rear suspension screw pin set hardened steel by Traxxas. Includes Four 4x18mm pins Two 4x38mm pins Two 4x33mm pins Two 4x43mm p...
View full details
The Traxxas Rustler 4X4 Body Reinforcement Set provides added protection for your Rustler 4x4 or Rustler during extreme driving. These high-strengt...
View full details
This is a replacement Traxxas GT-Maxx Rebuild Kit, intended for use with the Maxx 1/10 Brushless 4WD Monster Truck. Includes lower cartridge, pisto...
View full details
Steering bellcranks/ bellcrank support/ servo saver/ servo saver spring/ draglink/ 3x20mm shoulder screws (2) Steering bellcranks with support, se...
View full details
Replacement part for these models: Maxx¶© TRA3463 Traxxas Cooling fan kit (with shroud), Velineon 540XL motor
The Traxxas Aluminum Steering Block Set is CNC Machined from 6061 Aluminum, and will increase the durability of the front end of the Slash 4x4, R...
View full details
Battery, Series 3 Power Cell, 3300mAh (NiMH, 7-C flat, 8.4V) Traxxas 3000-series Power Cell NiMH battery packs provide excellent run times and ...
View full details
The Traxxas TRX-4 Machined Overdrive Ring & Pinion Gear is a heavy duty gear upgrade for your TRX-4 build. This ring and pinion gear set is ov...
View full details
This is an optional set of Traxxas Maxx Aluminum Steering Blocks, intended for use with the Maxx 1/10 Brushless 4WD Monster Truck. These parts hav...
View full details
This is an optional set of Traxxas Maxx Aluminum Caster Blocks, intended for use with the Maxx 1/10 Brushless 4WD Monster Truck. These parts have ...
View full details
This is a pack of two optional Traxxas Front Heavy Duty Machined Axle Shafts for use with the TRX4 series. These heavy duty axle shafts are used in...
View full details
Bumper, front/ bumper support Replacement front bumper with bumper support Replacement part for these models: Rustler® 4X4 Brushless Rustler® 4X...
View full details
Input shaft, transmission (cush drive) Transmission (Cush Drive) input shaft Replacement part for these models: X-Maxx® Ultimate X-Maxx® XRT® Ul...
View full details
M3x27mm Bhcs Button Head Cap Screws (6)
This is a replacement Traxxas Differential Gear Set, including four spider gears and two spider gear shafts. Includes:(4) Spider Gears(2) Spider Ge...
View full details
LED lightbar (Rigid), TRX-4® (requires #8028 power supply) The Rigid® LED light bar kit adds more candlepower to your TRX-4® Land Rover® Defende...
View full details
These are the 20x27x4mm ball bearings for use on the Traxxas Summit Truck RTR.Features: Steel construction that is rubber sealedIncludes: Two Ball ...
View full details
This is a replacement differential ring and pinion gear set for the Traxxas TRX-4. Package contains one ring gear and one pinion gear. Features:F...
View full details
Rebuild kit, TRX-4® shocks (x-rings, o-rings, pistons, bushings, e clips, rod ends, and travel limiters) The GTS shock rebuild kit includes the ...
View full details
Output gear, 51-tooth, metal (requires #7785X input gear) Metal 51-tooth output gear. Requires 7785X metal input gear. Replacement part for thes...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL:Â sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 10am to 3pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS