TRA5581 Gaskets, differential/transmission
TRAXXAS
These are the differential and transmission gaskets for the Traxxas Nitro Jato Stadium Truck.Features: Rubber construction that’s black and blue in...
View full details
These are the differential and transmission gaskets for the Traxxas Nitro Jato Stadium Truck.Features: Rubber construction that’s black and blue in...
View full details
This is a set of rod ends for the Traxxas Revo. They are to be used on the rear toe-link rods only.Features: Plastic construction that’s black in c...
View full details
Traxxas optional red aluminum pushrods for the rocker arms for the REVO. These go between the Rocker Arms and the Lower Suspension Arms. **Must be ...
View full details
This is the Header Spring and Gaskets from Traxxas for the TRX 2.5, TRX 2.5R and the TRX 3.3 Engines FEATURES: Spring constructed of steel INCLUDE...
View full details
Traxxas pair of driveshafts, outside U-joint is lubricated and sealed by a rubber boot to protect it from dirt and grime U-joint pins are held capt...
View full details
Traxxas rear plastic skidplate for the T-Maxx attaches to and protects chassis and supports the rear bulkhead. Skidplate is gray in color INCLUDES:...
View full details
TRA4914R Body mount posts, front (2)/ body mount, rear/ body mount screw pins (4)
This is a set of two replacement slipper pressure rings from Traxxas. These are metal rings with a notch in them and are installed on either side t...
View full details
Flywheel (N. Rustler/Sport/Stampede/T-Maxx/Revo/Jato/Slayer) Replacement part for these models: Nitro Rustler® Revo® T-Maxx® TRX® 2.5R TRX® 3.3 T...
View full details
Air filter (complete with rubber base & foam insert) Replacement part for these models: TRX® Pro .15 Accessory part for these models: TRX® ...
View full details
Traxxas Cap Head Machine Screw 3x32mm (6) Features: Black finish Steel construction Cap head design Includes: (6) 3X32mm cap head machine screws...
View full details
Traxxas six pack of 3X28mm cap head screws have a zinc finish and metal construction. Includes: (6) 3X28mm cap head screws(6) lock washers(6) washe...
View full details
TRA3959 Spur gear, 62-tooth (0.8 metric pitch, compatible with 32-pitch)
These are the replacement bulkhead cross braces for the Traxxas E-Maxx. These Braces are located in between the bumper mounts.Features: Black nylon...
View full details
Gear, 26-T pinion (48-pitch) (fits 3mm shaft)/ set screw 26-tooth pinion gear (48-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pi...
View full details
TRA9579R Traxxas Ring gear, differential/ pinion gear, differential (machined) (front or rear)
Traxxas Body, Maxx V2 (clear, requires painting)/ window masks/ decal sheet (fits Maxx V2 with extended chassis (352mm wheelbase))
This is a set of two Traxxas Window Nets intended for the Unlimited Desert Racer. Note:Â Pictures are for illustrative purposes only, no vehicles ar...
View full details
Bumper, front, winch, TRX-4® Sport (includes bumper mount, D-Rings, fairlead, hardware) (fits TRX-4® Sport with 8855 winch) (191mm wide)Accessory p...
View full details
This is an optional Traxxas Rustler 4x4 and Slash 4x4 LCG Chassis Red Brace Kit. This heavy-duty chassis brace fits Slash 4X4 models equipped with...
View full details
Differential output yoke assembly, extreme heavy duty (2) (left or right, front or rear) (assembled with external-splined half shaft)/ screw pin (...
View full details
This is an upgraded Traxxas Unlimited Desert Racer Center Front Driveshaft in steel construction. This package also includes one 2.5x12mm screw pin...
View full details
Driveshafts, steel constant-velocity (assembled), front or rear (4) (#8654, 8654G, or 8654R and #7758, 7758G, or 7758R required for a complete set...
View full details
Ball bearings, blue rubber sealed (6x10x3mm) (2) Pair of 6x10x3 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out...
View full details
This is the Titan 21-turn 550 motor for the Traxxas E-Maxx. The Titan 550 is a 21-turn fan-cooled 550 size motor capable of handling 14.4 volts. Th...
View full details
Ball bearings, black rubber sealed (5x10x4mm) (2) Pair of 5x10x4 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal b...
View full details
Push bar, bumper (chrome) (fits #8069 bumper) Give your truck a rugged new look with this chrome bumper push bar. Fits 8069-series front bumper. ...
View full details
Box, receiver (sealed)/ foam pad/ 2.5x8mm CS (4)/ 3x10mm CS (2)Replacement part for these models:Rustler 4X4 VXLRustler 4X4
This is a replacement wing for the Traxxas Rustler 4x4. Features: Factory Replacement Part Available in: Black, White, Green, Blue, Orange, and Re...
View full details
This is a replacement Traxxas 96mm Unlimited Desert Racer Steel Constant-Velocity Driveshaft Bone. Features:Factory Replacement Part Includes:(1) D...
View full details
Traxxas 8620 Chassis supports front & rear 8620 - Chassis supports, front & rear/ 3x12mm BCS (4)/ 3x15mm CS (4)/ 4x14mm BCS (1) Replacement...
View full details
TRA5102A Ball bearings, black rubber sealed (15x21x4mm) (2)
Front Bumper; Pink for Rustler/Bandit/Stampede
This is a replacement Traxxas X-Maxx 13 Tooth Front Differential Pinion Gear. Features:Factory Replacement Part Includes:(1) Front Differential Pin...
View full details
Shock caps, GTX shocks/ spring perch/ adjusters/ 2.5x14 CS (2) (for 2 shocks) Pair of GTX shock caps with spring perches (2), adjustment rings (2)...
View full details
WHEEL HUBS, HEX (4) Set of four 12 mm hex wheel hubs Replacement part for these models: 1/18 LaTrax® Desert Prerunner 1/18 LaTrax® Teton®
This is the Traxxas Gearbox housing/ motor plate.. This is Traxxas part number 7590XPart Number: 7590X / TRA7590XFitsLaTrax SSTLaTrax Teton
This is the set of Traxxas Long GTR Shock Springswith 0.810 Pink Compression Rate.FEATURES:Steel construction, white in colorDab of paint on end of...
View full details
Traxxas pair of shock springs for the 1/16 Summit with a blue spring rate. Spring,shock(GTR) for 1/16 Summit. Requires: Installation onto shocks Sp...
View full details
This is a set of two Traxxas Progressive Rate Front Shock Springs, and are intended for use with the Traxxas Slash 4x4. The Slash 4X4’s fully adjus...
View full details
TRA6838X Shock tower, rear, 7075-T6 aluminum (blue-anodized) Optional Aluminum Rear Shock Tower for the Traxxas Slash 4x4 FEATURES: 7075-T6 blue an...
View full details
This is a set of two Traxxas Standard Compound Kumho Venture MT Tires, Pre-Mounted on SCT Split-Spoke Wheels. This tire set is intended for use on ...
View full details
These are the battery straps for the Spartan Boat from Traxxas.Features: Black color velcro strapIncludes: 4 battery strapsSpecs:Length: 9 (228mm)W...
View full details
This is a replacement Traxxas LED Light Front Harness. This package includes four clear LED's, as well as three small zip ties to help with install...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL:Â sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 10am to 3pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS