TRA3474 Dual Cooling Fan Kit Velineon 1200XL motor
TRAXXAS
Dual cooling fan kit (with shroud), Velineon 1200XL motor
Dual cooling fan kit (with shroud), Velineon 1200XL motor
TRA6634 LaTrax Alias Quad Rotor Motor CW/CCW(4) This is a replacement LaTrax Alias Motor Set, which includes four pre-wired motors, two clockwise...
View full details
This is replacement Progressive Rear Shock Springs for the 2WD Slash. Features: Metal construction Pink in color Includes: (2) Shock Sprin...
View full details
This is a replacement Traxxas X-Maxx 13 Tooth Front Differential Pinion Gear. Features:Factory Replacement Part Includes:(1) Front Differential Pin...
View full details
Shock caps, GTX shocks/ spring perch/ adjusters/ 2.5x14 CS (2) (for 2 shocks) Pair of GTX shock caps with spring perches (2), adjustment rings (2)...
View full details
WHEEL HUBS, HEX (4) Set of four 12 mm hex wheel hubs Replacement part for these models: 1/18 LaTrax® Desert Prerunner 1/18 LaTrax® Teton®
This is the Traxxas Gearbox housing/ motor plate.. This is Traxxas part number 7590XPart Number: 7590X / TRA7590XFitsLaTrax SSTLaTrax Teton
This is a replacement Traxxas GTR Shock Cap & Spring Retainer Set. These parts are compatible with Traxxas GTR Long and XX-Long shocks (TRA7461...
View full details
Rebuild kit, GTR long/xx-long shocks (x-rings, bladders, pistons, piston nuts, shock rod ends, hollow balls) (renews 2 shocks) The 1/10 scale GTR ...
View full details
This is a replacement Traxxas Low-CG Chassis, and is intended for use with the Traxxas 1/10 Rally Racer and the Slash 4x4 Ultimate 1/10 scale short...
View full details
Traxxas pair of shock springs for the 1/16 Summit with a blue spring rate. Spring,shock(GTR) for 1/16 Summit. Requires: Installation onto shocks Sp...
View full details
This is a set of two Traxxas BFGoodrich Mud-Terrain TA Tires, Pre-Mounted on SCT Split-Spoke Wheels. These are intended for use on the front and re...
View full details
This is a set of two Traxxas Progressive Rate Front Shock Springs, and are intended for use with the Traxxas Slash 4x4. The Slash 4X4’s fully adjus...
View full details
TRA6838X Shock tower, rear, 7075-T6 aluminum (blue-anodized) Optional Aluminum Rear Shock Tower for the Traxxas Slash 4x4 FEATURES: 7075-T6 blue an...
View full details
This is the Mounts for the Traxxas RPM Sensor (Nitro Engines). Features: Plastic and metal construction Includes: (3) Different plasti...
View full details
Save 45%
This is an optional Traxxas "Short" Temperature & Voltage Sensor. Temperature data is critical to monitoring performance, gauging the effects o...
View full details
This is a set of two Traxxas Standard Compound Kumho Venture MT Tires, Pre-Mounted on SCT Split-Spoke Wheels. This tire set is intended for use on ...
View full details
Tire & wheel assy, glued (SCT, black, orange beadlock wheels, SCT off-road racing tires, foam inserts) (2) (2WD Front) Pair of SCT off-road ti...
View full details
Springs, front (white) (progressive rate) (2) Pair of white progressive-rate springs for Traxxas long Ultra Shocks are custom-wound to provide res...
View full details
These are the battery straps for the Spartan Boat from Traxxas.Features: Black color velcro strapIncludes: 4 battery strapsSpecs:Length: 9 (228mm)W...
View full details
This is a replacement Traxxas LED Light Front Harness. This package includes four clear LED's, as well as three small zip ties to help with install...
View full details
Traxxas Seal Kit/Receiver Box Slash Features: Prevents moisture and dirt from entering receiver box Includes: Silicone rectangle shaped O-ring S...
View full details
Traxxas Flat Wrench 8mm Blue Revo Features: Aluminum Construction Blue anodization Etched "Traxxas" and "8mm" logos Drilled hole on one end of ea...
View full details
Traxxas Brake Pad Set Revo Features: Aluminum construction with fiber pads pre-glued Inlcudes: Two brake pads Fits: Traxxas Revo Traxxas T-Max...
View full details
This is a set of rod ends for the Traxxas Revo. They are to be used on the rear toe-link rods only.Features: Plastic construction that’s black in c...
View full details
This is the Header Spring and Gaskets from Traxxas for the TRX 2.5, TRX 2.5R and the TRX 3.3 Engines FEATURES: Spring constructed of steel INCLUDE...
View full details
Nuts, 2.5mm nylon locking (12) Set of twelve 2.5 mm nylon locking nuts. Replacement part for these models: E-Revo® VXL Brushless Jato® Revo® Sla...
View full details
This is the ring gear and parts for the Traxxas T-Maxx 4WD Radio Control Monster Truck. These ring and pinion gears are installed in the front diff...
View full details
This is a set of two replacement slipper pressure rings from Traxxas. These are metal rings with a notch in them and are installed on either side t...
View full details
Traxxas clutch bells are made from durable steel for long-lasting performance. Available in a variety of sizes to fine tune your truck's gear ratio...
View full details
These are the left and right differential housings for the Traxxas E-Maxx.Features: Constructed of plastic Replaces damaged or broken diff housing...
View full details
Traxxas six pack of 3X28mm cap head screws have a zinc finish and metal construction. Includes: (6) 3X28mm cap head screws(6) lock washers(6) washe...
View full details
Steering blocks, Rustler®/Stampede®/Bandit (2), 6061-T6 aluminum (red-anodized)/ 5x11mm ball bearings (4) Traxxas aluminum steering blocks improve...
View full details
Suspension arms, (rear) (2) Standard rear suspension arms Replacement part for these models: Ford® F-150 Raptor Ford® F-150® Raptor Nitro Rustle...
View full details
Threaded rods (20/25/44mm 1 ea.)/ (1) 12mm set screw
Gear, 26-T pinion (48-pitch) (fits 3mm shaft)/ set screw 26-tooth pinion gear (48-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pi...
View full details
Half-shafts (internal-splined (2)/external-splined (2))/ metal U-joints (4) Set of two half shafts includes internal shafts (2) and external shaft...
View full details
Wheelie bar, assembled (red) (fits Slash, Bandit®, Rustler®, Stampede® series)The patented Traxxas adjustable wheelie bar features four-position ad...
View full details
This is an optional Traxxas GT-Maxx Shock Springs, intended for use with the Maxx 1/10 Monster Truck. These springs have a 1.725 rate and a natural...
View full details
Traxxas Body Accessories Kit, 2017 Ford Raptor (Includes Grill, Hood Insert, Side Mirrors, & Mounting Hardware)
Bumper, front, winch, TRX-4® Sport (includes bumper mount, D-Rings, fairlead, hardware) (fits TRX-4® Sport with 8855 winch) (191mm wide)Accessory p...
View full details
This is an upgraded Traxxas Unlimited Desert Racer Center Front Driveshaft in steel construction. This package also includes one 2.5x12mm screw pin...
View full details
Traxxas 39mm Aluminum Camber Link Turnbuckles make it easy to add strength and adjustability to 4X4 Traxxas models. These turnbuckles come in a f...
View full details
Traxxas 49mm Aluminum Camber Link Turnbuckles make it easy to add strength and adjustability to 4X4 Traxxas models. These turnbuckles come in a f...
View full details
This is the Blue Anodized Aluminum Motor Mount from Traxxas that is an accessory part for the Ford Fiesta ST Rally, Rustler 4X4, and Slash 4X4. ...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 4pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS