Gear set, metal (for 2085, 2085X servos) Replacement metal gear set for 2085X servo. Gears can also be used to upgrade 2085 servo. (Must swap all ...
View full details
Traxxas Paddle Tires let you tear up sand, snow - and even water! These paddles are pre-mounted on black wheels that will fit the Unlimited Desert ...
View full details
Ring gear, differential/ pinion gear, differential (machined, spiral cut) (front) Spiral-cut 37-tooth ring and 13-tooth pinion front differential ...
View full details
Ring gear, differential/ pinion gear, differential Differential ring and pinion gears Replacement part for these models: E-Revo® VXL Brushless
This is a pack of two replacement Traxxas E-Revo VXL 2.0 Center Half Shafts.
Carrier, differential (aluminum)/ (requires #7783X spider gear shaft) Aluminum differential carrier includes X-ring gaskets (2), ring gear gasket,...
View full details
The Traxxas E-Revo 2.0 Heavy-Duty Front Left Suspension Arm Set features a design which incorporates latest proprietary composite material. Traxxas...
View full details
This is the Traxxas X-Maxx Green Aluminum Motor Mount Washer and Screw Set. This set includes four washers and four screws.FitsX-Maxx 6SX-Maxx 8S
Bumper mounts, front & rear/ screw pins (4) Replacement front and rear bumper mounts for TRX-4®. Includes screw pins (4). Replacement part fo...
View full details
Screws, 3x30mm cap-head machine (hex drive) (6) 3x30 mm cap-head machine screws with hex drive heads. Set of six.
Features:Steel and aluminum constructionIncludes:Two each; Shafts and Aluminum SpacersFour Gear Pads
Ring gear, differential, 42-tooth (use with #7777, #7778 13-tooth differential pinion gears) 42-tooth differential ring gear. Use with 7777 13-toot...
View full details
This is a set of left and right rear stub axle carriers for the Traxxas X-Maxx Monster Truck. Features: Molded composite plastic construction Hold...
View full details
This is a set of Traxxas Steel upper and lower Tie Bars.Features: Steel construction Mounts upper and lower bulkhead halves in place Includes: On...
View full details
This is a set of Traxxas Box/Receiver/Wire Cover/Foam Pads.Features: Molded composite plastic receiver box with rubber plug Fastens to chassis to ...
View full details
This is a replacement LaTrax Steering Bellcrank Set. Package includes steering bellcranks, servo saver, spring, spring retainer, posts and draglink...
View full details
BULKHEAD, REAR Rear bulkhead for vehicles equipped with the low-CG 4X4 chassis. Does not fit standard chassis. For a complete chassis conversion, ...
View full details
This is a set of optional Traxxas Assembled Steel CV Driveshafts, and are intended for use with the Traxxas 1/16 E-Revo VXL.Traxxas Steel Constant ...
View full details
This is the Traxxas Y-Harness, Servo and LED Light Set.Features: Black and red colored Made of durable material Includes:One Traxxas Y-Harness, S...
View full details
Servo horn (with built-in spring and hardware) (for Summit locking differential) Shift servo horn with built-in spring tensioner Replacement part...
View full details
This is the Traxxas pair of assembled GTR blue-anodized aluminum shocks without springs for the Traxxas Revo, E-Revo, Summit, Slayer and Jato. GTR ...
View full details
Spring, shock (GTR) (6.4 rate purple) GTR shock springs use high-quality spring steel with a durable red powder-coated finish. GTR springs are off...
View full details
This is the throttle & brake linkage set for the REVO from Traxxas.Includes: Throttle & brake linkage rods Springs Thumb nut Various other...
View full details
Wheel nuts, splined, 17mm (blue-anodized) (4) This set of four 17 mm blue aluminum wheel nuts is beautiful anodized for eye-catching looks with Tr...
View full details
Traxxas front left and right halves differential bulkhead for the Revo are constructed of black plastic. Rocker shafts preinstalled. This package i...
View full details
Ball bearings, blue rubber shield (5x10x4mm) (2) Pair of 5x10x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out...
View full details
Ball bearings (5x10x4mm) (2) (metal shielded, for clutch bell) Pair of 5x10x4 mm ball bearings Replacement part for these models: Jato® Revo® Sl...
View full details
Gear, 20-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw The heavy-duty 20-tooth (32-pitch) pinion gear is mach...
View full details
These are non-adjustable camber link for the Traxxas Rustler and Stampede.Features: Black Plastic ConstructionIncludes: Two Short and Two Long Link...
View full details
These are the Traxxas optional aluminum steering blocks in green for the Rustler, Stampede and Bandit.Features: T-6061 aluminum construction that’s...
View full details
Body mounts, front & rear/ body mount posts, front & rear (adjustable)/ 2.5x18mm screw pins (4) Front and rear adjustable body mounts with...
View full details
Turnbuckles, 78mm (2) Replacement 78 mm metal turnbuckles. Rod ends sold separately. Replacement part for these models: BIGFOOT® No. 1 Officiall...
View full details
Traxxas E-Revo 2.0 Aluminum Heavy-Duty Steering Link Push Rods are a machined aluminum upgrade that provides increased strength, lighter weight and...
View full details
Tires & wheels, assembled, glued (2.8") (RXT black wheels, Talon EXT tires, foam inserts) (4WD electric front/rear, 2WD electric front only) (...
View full details
Ring gear, differential/ pinion gear, differential (machined, spiral cut) (rear) Spiral-cut 37-tooth ring and 13-tooth pinion differential gear s...
View full details
Sold out
This is a Traxxas Painted and Decaled Rock n' Roll Body for the Slash 4x4.
LED expedition rack scene light kit (fits #8111 or 8213 series bodies, requires #8028 power supply) TRX-4® Sport LED Scene Lights attach directly ...
View full details
Stub axle assembly, front, outer, extreme heavy duty (1) (left or right) (assembled with internal-splined half shaft) Extreme heavy-duty front out...
View full details
This is the Spool Housing, Spool Shaft and Bushing for the Traxxas 4-Tec 2.0 chassis and Ford GT. Features: Molded Composite Housing & Bush...
View full details
This is an optional LaTrax High Output USB Dual 3.7V Port LiPo Battery Charger. This charger allows you to charge two LaTrax 1S batteries at once,...
View full details
This is the Traxxas X-Maxx Replacement Center Skidplate.Features Molded composite plastic construction Reduces damage to underside of chassis and ...
View full details
This is the Traxxas caster steering block for the LaTrax.Features: Made of black plastic Includes: Two caster hubs (C-hubs) and two steering blo...
View full details
Features:Aluminum constructionAnodized red in colorIncludes:Four Toe LinksEight Hollow BallsOne 5mm WrenchRequires:Installation on the vehicleTechn...
View full details
These are the front and rear toe links for use on the Traxxas 1/16 E-Revo VXL 4WD RTR.Features: Nylon construction that is red in colorIncludes: F...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 4pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS
