TRA5863 Tires & wheels, assembled, glued (2) (4WD f/r, 2WD rear)
TRAXXAS
This is a pack of two replacement Traxxas Pre-Mounted Robby Gordon Rear Tire & Wheels, and is intended for use with the Traxxas Slash Robby Gor...
View full details
This is a pack of two replacement Traxxas Pre-Mounted Robby Gordon Rear Tire & Wheels, and is intended for use with the Traxxas Slash Robby Gor...
View full details
Springs, rear (white) (progressive rate) (2) Pair of white progressive-rate springs for Traxxas XX-long Ultra Shocks are custom-wound to provide r...
View full details
This is a replacement Differential part set, intended for use with the Traxxas Summit Monster Truck. Includes: Heavy Duty Differential Carrier (1)...
View full details
Traxxas replacement GTR shock caps and spring retainers for the Revo. Replacement GTR shock retainers for the Traxxas Nitro Revo Monster Truck. INC...
View full details
These are the replacement FWD/REV output gears for the Traxxas Nitro Revo Monster Truck.Features: Nylon construction that’s black and white in colo...
View full details
Traxxas Steel Rocker Arm Post Revo (2) These are the Steel Rocker Arm Posts for the REVO from Traxxas. Features: Black steel construction Include...
View full details
This is the optional heavy-duty servo saver spring for the Traxxas Revo.Features: Steel construction Chrome Plated Conical Shape Includes: One He...
View full details
Gear set (complete) (EZ-Start® 2) Complete EZ-Start® 2 replacement gear set Replacement part for these models: Jato® Nitro Rustler® Nitro Slash ...
View full details
These are plastic washers from Traxxas. This will work of the Nitro Rustler.Features: Plastic constructionIncludes: Ten WashersRequires: Traxxas Ni...
View full details
Propeller Replacement plastic propeller Replacement part for these models: Blast
Stub axle carriers, Rustler®/Stampede®/Bandit (2), 6061-T6 aluminum (red-anodized)/ 5x11mm ball bearings (4) Traxxas aluminum stub axle carriers i...
View full details
Screws, 4x30mm button-head machine (hex drive) (6) 4x30 mm button-head machine screws with hex drive heads. Set of six. Replacement part for thes...
View full details
Servo, digital high-torque (ball bearing), waterproof (X-Maxx mount)
This is a set of eight Traxxas 5mm Black Serrated Steel Flanged Nylon Locking Nuts for the Unlimited Desert Racer. Features: Made of steelSerrated...
View full details
This is a replacement Traxxas Front Bumper, and is intended for use with the Traxxas Maxx Monster Truck. Features:Factory Replacement Bumper Includ...
View full details
Traxxas Power Cell 3000mah 7.2V NiMH iD Plug
Battery, Series 4 Power Cell, 4200mAh (NiMH, 6-C flat, 7.2V) Traxxas 4000-series Power Cell NiMH battery packs provide 25% greater capacity tha...
View full details
High-Torque 330 Blue ServoThe Traxxas High-Torque 330 Blue servo combines maximum steering authority with a long list of high-performance features....
View full details
Wheel hubs, splined, 17mm (red-anodized) (4)/ 4x5 GS (4), 3x14mm pin (4) Set of four 17 mm red-anodized aluminum wheel hubs combine high-profile l...
View full details
Wheelie bar, black (assembled) X-Maxx® wheelie bar comes assembled with wheels Replacement part for these models: X-Maxx® Ultimate X-Maxx® XRT...
View full details
This is a pack of two replacement Traxxas 4-Tec 2.0 1.9" Response Front Tires Pre-Assembled on Black Chrome Split-Spoke Wheels. These wheels featur...
View full details
Nuts, 4mm flanged nylon locking, serrated (black) (10) Set of ten black flanged nylon locking nuts Replacement part for these models: 4-Tec® 2.0...
View full details
Fender flares, front & rear (2 each) (fits #8011 or #8211 series bodies) Front and rear fender flares for the TRX-4® 8011-series Land Rover® ...
View full details
This is the Traxxas 14T Pinion Gear and Set Screw for the LaTrax Rally Car.Features: Silver/grey colored Made of steel For the LaTrax Rally Car I...
View full details
This is a replacement Traxxas Rear Suspension Arm Set. Features:Factory Replacement Suspension Arm Set Includes: (2) Upper Suspension Arms (Right...
View full details
This is the Traxxas set of four Hard Anodized GTR Shocks for the 1/16th scale.Features: Fully assembled Hard anodized Titanium shock shafts Inclu...
View full details
This is a replacement Traxxas Chassis, and is intended for use with the Traxxas Slash 4x4.
This is the CV style stub axle for use on the Traxxas Summit Truck RTR.Features: Machined steel construction that’s CV styleIncludes: CV Style Stu...
View full details
Traxxas piston and sleeve with two wrist pin clips for the Traxxas TRX 3.3 engines Traxxas piston and sleeve are made of ABC construction, Aluminum...
View full details
This is the replacement starter shaft for the T-MAXX 2.5 engine.Features: Steel ConstructionIncludes: One shaftRequires: Traxxas 2.5 T-MAXX engineS...
View full details
Traxxas high volume air filter body for the Maxx Trucks. Replaces damaged or dirty air filter assemblies Plastic body with foam element and rubber ...
View full details
Air filter housing/ foam insert/ straight base/ angled base/ cable tie (1-each) (TRX® 2.5, 2.5R, 3.3) Air filter housing with foam insert include ...
View full details
Nuts, 5mm flanged nylon locking (steel, serrated) (8) Set of eight 5 mm nylon locking nuts feature a serrated flange to keep them snug on the whee...
View full details
Differential output yokes, hardened steel (w/ U-joints) (2) Hardened steel differential output yokes provide extra strength for 2WD models using m...
View full details
Lightweight and great looking, these blue-anodized aluminum flange lock nuts are the perfect finishing touch for your truck. Accessory part for th...
View full details
These are the 3mm x 10mm shoulder screws for the Traxxas Nitro Jato Stadium Truck.Features: Metal construction that’s black in colorIncludes: Six 3...
View full details
Spur gear, 65-tooth (0.8 metric pitch, compatible with 32-pitch) 65-tooth spur gear (32-pitch). Traxxas spur gears let you fine-tune the performanc...
View full details
Traxxas aluminum stub axle carriers add both strength and beauty. In addition to the durability and precision of the machined billet 6061-T6 alumin...
View full details
Screws, 3x15mm flat-head machine (hex drive) (6) Set of six 3x15 mm flat-head machine screws with hex-drive heads Replacement part for these mode...
View full details
Spring retainers, upper & lower (2)/ spring pre-load spacers: 1mm (4)/ 1.5mm (2)/ 2mm (2)/ 4mm (2)/ 8mm (2) (Big Bore Shocks) Replacement Big ...
View full details
Tires & wheels, assembled (Tracer 2.2" chrome wheels, Alias 2.2" tires)
Caster blocks (left & right) (30-degree) Replacement left and right 30° caster blocks Replacement part for these models: Bandit® VXL Bandit®...
View full details
Backplate screws (3x8mm cap-head machine) (6)/washers (6)/ wrench
Ball bearing, black rubber sealed (6x16x5mm) (2) Pair of 6x16x5 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal b...
View full details
This is a Traxxas color-burst painted body with pre-applied decals for the 1/18 LaTrax Desert PreRunner 4WD racing truck.
Traxxas Power Tap Connector with Cable. Pakcage includes connector, power tap with cable and two 2.6x8mm button head screws. Use TRA6549 power tap...
View full details
This a steel servo horn from Traxxas intended for the Maxx vehicle. Features:Steel Construction Includes:(1) Steel Servo Horn
This is a replacement Traxxas Maxx Outer Stub Axle Assembly, intended for use with the Maxx 1/10 Brushless 4WD Monster Truck. This part is for fron...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 4pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS