Hex wheel hubs, steel (2)/ axle pins (2.5x12mm) (2) 14 mm steel wheel hubs provide superior strength and durability and won't round off. Includes ...
View full details
Spur gear, 56-tooth (0.8 metric pitch, compatible with 32-pitch) 56-tooth spur gear (32-pitch). Traxxas spur gears let you fine-tune the performan...
View full details
This is a replacement Traxxas Long Wheelbase Chassis. Even at maximum speed, E-Maxx feels stable and controlled thanks to its extra-long 335mm whee...
View full details
Spring pre-load spacers: 1mm (4)/ 2mm (2)/ 4mm (2)/ 8mm (2) Change the ride height on your vehicle with these spring pre-load spacers for Traxxas ...
View full details
Steering blocks (l&r) Replacement left and right steering blocks Replacement part for these models: Bandit®
TRA9576 Traxxas Wheelie bar, black (assembled)
This is a LED Light Set. You must have the TRA8090 light kit to completely install this product. This lighting kit is compatible with the Scale and...
View full details
Push rod (steel), heavy duty (2) (assembled with rod ends) Replacement heavy-duty steel push rods for E-Revo® VXL. Rods come assembled with rod en...
View full details
Oil, differential (500K wt) (0.7 oz (20cc)) Thick 500k weight differential oil adds significant locking action to your differentials. Traxxas perf...
View full details
Chassis top brace Replacement X-Maxx® chassis top brace Replacement part for these models: X-Maxx® Ultimate X-Maxx®
This is the connecting rod for the Traxxas 2.5 and 3.3 Engine. This part connects the piston to the crankshaft.Features: Aluminum construction Pre...
View full details
These are the Traxxas 78T Spur Gears for the LaTrax Alias Quadcopter.Features: Black colored 78 Tooth Spur Gear Made of durable plastic For the La...
View full details
Pinion gear, differential, 13-tooth (rear) (use with #7779 42-tooth differential ring gear) 13-tooth rear differential pinion gear. Use with 7779 4...
View full details
Bulkhead tie bars, front & rear, aluminum (blue-anodized) Set of front and rear bulkhead tie bars with a brilliant blue anodized finish Repla...
View full details
This is a replacement Traxxas Rear Stub Axle, and is intended for use with the Traxxas Slash 4x4, Slash 4x4 Ultimate, Rally and Slash equipped with...
View full details
Gear, 9-T pinion (32-p) (steel) (fits 3mm shaft)/ set screw 9-tooth pinion gear (32-pitch) fits 3 mm motor shafts and includes set screw. Traxxas ...
View full details
This is the suspension multi-tool for Traxxas Revo. It is used to adjust the Shock Upper Cap, Shock Rod-end removal/install and to tighten/loosen t...
View full details
This is the replacement fuel tank cap O-rings for the Traxxas Revo model.Features: Rubber construction that’s orange in colorIncludes: Two rubber O...
View full details
This is the pair of steel pushrods for the Traxxas Revo.Features: Metal pushrod construction Plastic rod ends with hollow ball ends Includes: Two...
View full details
Wheelie bar, assembled (fits all T-Maxx®/E-Maxx® trucks) The Maxx® wheelie bar has 4 snap-in adjustment positions that allow you to choose how ext...
View full details
Steering bellcranks/ servo saver/ servo saver spring/ servo spring retainer (requires 5x11 BB (2) Steering bellcranks with servo saver, servo save...
View full details
This is a 6 pack of Traxxas 4X6mm button head screws.Features: Steel construction that is black in color Button head design Includes: Six 4X6mm b...
View full details
Cover, gear/ rubber gear cover plug/ 3x6 RM (2) Replacement gear cover for Magnum 272 transmissions. Includes clutch nut adjustment cover plug and...
View full details
Turnbuckles, aluminum (blue-anodized), camber links, front, 39mm (2), rear, 49mm (2) (assembled w/rod ends & hollow balls)/ wrench Traxxas’ al...
View full details
This is a set of two optional blue aluminum stub axle carriers with bearings from Traxxas. These stub axle carriers mount to the rear control arms,...
View full details
This is a replacement Traxxas Body Mount Set. This set includes the front and rear mount.
Turnbuckles, camber link, 47mm (67mm center to center) (front)
Traxxas Tires & wheels, assembled, glued (X-Maxx® black wheels, Sledgehammer® belted tires, dual profile (4.3" outer, 5.7" inner), foam inserts...
View full details
Input gear, 22-tooth/ input shaft (transmission) (heavy duty) (fits Bandit®, Rustler®, Stampede®, Slash® 2WD) The heavy-duty input shaft features...
View full details
This is a front winch bumper that fits that Traxxas TRX-4 1979 Bronco & Blazer with 8855 winch. Features: D-rings Fairlead Includes: (...
View full details
This is the Traxxas Red 6061-T6 Aluminum Center Driveshaft for the 1/10 Slash 4x4 vehicles. Accessory Part For1/10 Ford Fiesta ST RallySlash 4x4 Br...
View full details
This is a pack of two Traxxas Maxx All-Terrain Tires pre-mounted to black wheels with a splined 17mm hex. These tires have been glued to the wheel ...
View full details
Transmitter, TQ 2.4GHz, 2-channel (transmitter only) Switch on the power and drive! That's all there is to it with the TQ™ 2.4GHz radio. There are...
View full details
Screw pin, 4x15mm (6) Set of six 4x15 mm screw pins with hex-drive heads Replacement part for these models: E-Revo® VXL Brushless Revo® Slayer® ...
View full details
Traxxas Rustler 4X4 Roof Skid Plate. Package includes replacement skid plate and four 3x12mm cap head screws.
Starter, recoil (complete with screws) (TRX® 2.5) Replace the electric EZ-Start® system on your TRX® 2.5 or 3.3 engines with the recoil pull start...
View full details
This is a replacement Traxxas Center Rear Driveshaft for the Unlimited Desert Racer. Features: Fully assembled Made from 6061-T6 aluminum Black-...
View full details
This is a pack of two replacement Traxxas E-Revo VXL 2.0 Steel Machined Steel Drive Cups. Also included are two 4x17mm screw pins.
Toe link, 5.0mm steel (front or rear) (2) Pair of steel 5 mm toe links fit front or rear Replacement part for these models: E-Revo® VXL Brushless
Turnbuckles, 36mm (2) Pair of 36 mm turnbuckles. Includes spacers. (rod ends sold separately) Replacement part for these models: Drag Slash 1967...
View full details
Spring, shock (GTR) (2.22 rate, black) (1 pair) 1/16 scale GTR shock springs use high-quality spring steel with a durable red powder-coated finish...
View full details
This is the Exo-Carbon finish wing for use on the Traxxas 1/16 E-Revo VXL 4WD RTR.Features: Nylon construction in an exo-carbon finishIncludes: One...
View full details
This is a replacement Motor Plate from Traxxas. Features: Aluminum construction Blue in color Includes: (1) Motor Plate Requires: Inst...
View full details
This is an optional Traxxas Aluminum Finned Motor Mount. Aluminum is great at dissipating heat making this mount a must have for any hot running mo...
View full details
This is a set of two Traxxas BFGoodrich Mud-Terrain TA Tires, Pre-Mounted on SCT Split-Spoke Wheels. These are intended for use on the front and re...
View full details
Springs, front (progressive, +20% rate, blue) (2) Pair of long progressive-rate springs are custom-wound to provide responsive control over small ...
View full details
This is a foam body washer set with two each of 2mm, 3mm, and 4mm foam washers from Traxxas.
We invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 4pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS
