Heavy-Duty X-Maxx® Suspension Arm Heavy-duty X-Maxx lower suspension arms utilize our latest proprietary composite material for extreme durabilit...
View full details
Body reinforcement set (fits #7711 body) X-Maxx® body reinforcements provide added protection for your truck during extreme driving. These high-st...
View full details
This is the Traxxas slipper clutch rebuild kit.Includes: Two steel disc Two friction insert 4.0mm NL Two spring washers
This is a replacement Traxxas 9 Tooth LaTrax Pinion Gear, for use with the LaTrax 1/18 Desert Runner and 1/18 Teton. Features:Factory Replacement G...
View full details
This is a replacement LaTrax 54 tooth Spur Gear. Features:Factory Replacement Spur Gear Includes:(1) 54T Spur Gear
This is a replacement Traxxas 1/16 Steel Center Drive Shaft Set, and is intended for use with the Traxxas 1/16 scale family of 4WD vehicles. These ...
View full details
This is a shock spring set for the Traxxas 1/16 Summit with a 3.2 rate (Purple).Features: GTR shock springs for the 1/16 Summit Steel construction...
View full details
Spur gear, 50-tooth (0.8 metric pitch, compatible with 32-pitch) 50-tooth spur gear (32-pitch). Traxxas spur gears let you fine-tune the performan...
View full details
This is the clear LED lightbar in chrome for the Traxxas Stampede 4x4 VXL.Features: Four clear LED lights in chrome finish plastic housingsIncludes...
View full details
Servo horn (with built-in spring and hardware) (for Summit locking differential) Shift servo horn with built-in spring tensioner Replacement part...
View full details
This is the Traxxas set of four Anodized 17mm Splined Wheel Hubs, (4). These Splined Wheel Hubs are red colored and compatible with the Traxxas Sla...
View full details
This is a pair of Traxxas optional red aluminum pushrods for the rocker arms on the REVO. These go between the rocker arms and the lower suspension...
View full details
Screw pins, 4x13mm (with threadlock) (4) Set of four 4x13 mm screw pins with hex-drive heads and threadlock Replacement part for these models: R...
View full details
Traxxas Skid Plate Front Plastic Gray Features: Attaches to and protects chassis and supports the front bulkhead Skidplate is gray in color Inclu...
View full details
Traxxas pivot balls and bushings for the E-Maxx and T-Maxx for the Traxxas T-Maxx and E-Maxx 4WD Radio Control Monster Trucks. This package include...
View full details
Spur gear, 54-tooth (0.8 metric pitch, compatible with 32-pitch) (for center differential) The 54-tooth spur gear (32-pitch) fits the 6814 center ...
View full details
TRA3742 Shoulder screws, steering bellcranks
Tires & wheels(Tracer 2.2" black chrome wheels, Anaconda 2.2")
Servo connector, Y adapter (for dual-servo steering) The Y-adapter allows you to connect two servos to a single receiver port for trucks with dual-...
View full details
This is a replacement Traxxas Maxx Driveshaft Assembly, intended for use with the Maxx 1/10 Brushless 4WD Monster Truck. Features: Factory Replac...
View full details
Driveshafts, front, steel-spline constant-velocity (complete assembly) (2) Extreme heavy-duty front steel CV (constant velocity) driveshafts are e...
View full details
This is a set of two replacement stub axle carriers from Traxxas intended for the Maxx. Features: Traxxas Quality and Precision Factory Replacemen...
View full details
Ball bearings, black rubber sealed (5x8x2.5mm) (2) Pair of 5x8x2.5 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal...
View full details
These are the Traxxas 17mm Serrated Splined Wheel Nuts, replacement part for the X-Maxx and can also be used on the VXL Revo. Features: Aluminum c...
View full details
This is a replacement Traxxas X-Maxx Steering and Linkage Servo Horn. This steering link comes assembled pivot balls.
This is the complete differential assembly for use on the Traxxas 1/16 E-Revo and Slash VXL vehicles. Not for use on 1/10 scale vehicles.Features: ...
View full details
Cush drive key/ pin/ elastomer damper Cush drive key includes pin and elastomer damper Replacement part for these models: E-Revo® VXL Brushless ...
View full details
This is the upper & lower left front suspension arm set for the REVO from Traxxas.Features: Durable black nylon constructionIncludes: Upper and...
View full details
This is the set of axle pins for the Traxxas T-Maxx 4WD RTR Monster Truck. These pins go through the stub axles on each wheel, the wheel hubs are t...
View full details
This gear is a steel pinion gear in 48 pitch.Features: Steel pinion gearIncludes: 1 gear and 1 set screwSpecs:Pitch: 48Tooth: 25Shaft length: 3/16S...
View full details
Battery hold-down (grey) (1) / receiver hold-down (grey) (1) / metal posts (2)/ spacers (2)/ body clips (2)/ servo tape/ adhesive foam pad Gray ba...
View full details
Screws, 3x10mm caphead machine (hex drive) (6)/ lockwashers (6)/ hex wrench Set of six 3x10 mm cap-head machine screws with hex drive heads and lo...
View full details
Turnbuckles, toe link, 55mm (75mm center to center) (2)
Wheel nuts, splined, 17mm, serrated (red-anodized) (4) Set of four 17 mm wheel nuts are serrated for extra bite on the wheel to keep them snug n...
View full details
Traxxas Battery/charger completer pack (includes TRA2969 2-amp NiMH peak detecting AC charger (1), TRA2923X 3000mAh 8.4V 7-cell NiMH battery (1))
This is a Traxxas Front/Rear Steel Center Assembled Constant-Velocity Driveshaft Set for the E-Revo VXL Brushless. These Constant Velocity Drivesha...
View full details
TRA5041 Traxxas Grease, premium high performance (20cc)
Body mounts & posts, front & rear (complete set) Front and rear body posts and mounts. Includes screws. Replacement part for these models...
View full details
Gear, 16-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears) 16-tooth pinion gear (1.0 metric pitch) fi...
View full details
XL-5HV 3s Electronic Speed Control, waterproof (low-voltage detection, fwd/rev/brake) The high-voltage XL-5™ HV electronic speed control for TRX-4...
View full details
These are the Traxxas Premounted Off-Road Monster Truck Tires on 5-Spoke Wheels for the LaTrax Teton Monster Truck.Features: Black colored Plastic...
View full details
This is a replacement LaTrax 10 Tooth Pinion Gear, with set screw. This package also includes a small bracket and two mounting screws. Features:Fa...
View full details
Half shafts, heavy duty (external splined (2)/ internal splined (2))/ metal u-joints (4) Set of two heavy-duty half shafts includes internal shaft...
View full details
This is a optional Traxxas Aluminum Steering Block Set, and is intended for use with the Traxxas Slash 4x4 truck. Precision-machined for total stee...
View full details
This is the black wing for the Traxxas Revo 3.3. This part attaches to the rear of the body.Features: Plastic construction that’s black in colorInc...
View full details
Servo horns, steering, long (2), short (2)/ linkage, steering (3x20mm turnbuckle) (2)/ rod ends (short) (4)/ hollow balls (4) Two long and two sho...
View full details
Suspension arms upper (1)/ suspension arm lower (1) (right front) Upper and lower front right suspension arms Replacement part for these models: ...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 4pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS
