This is the Stuffing Tube with Nylon Liner for the Traxxas Spartan.Features: Brass and nylon constructionIncludes: One Assembled Stuffing TubeRequi...
View full details
This is an optional Traxxas LED Light Bar Set and is intended for use with the Traxxas Summit. Now you can blaze even brighter trails! The new Acce...
View full details
This is an optional Traxxas Center Driveshaft Set, and is intended for use with the Traxxas E-Revo and Summit trucks. Traxxas Steel Constant Veloci...
View full details
This is the steering arm mount for the Traxxas Revo.Features: Black plastic construction Standard and maximum throw steering stops Includes: Stee...
View full details
Skid plate set, front (2 pieces, plastic)/ skid plate, rear (1 piece, plastic) Skid plate set includes front and rear skid plates. Replacement pa...
View full details
Screws, 3x15mm caphead machine (hex drive) (with split and flat washers) (6) Set of six 3x15 mm cap-head machine screws with hex-drive heads and w...
View full details
Suspension arms (lower) (2) (fits T-Maxx®/E-Maxx) Pair of replacement lower suspension arms for T-Maxx® and E-Maxx® trucks. Replacement part for ...
View full details
Spur gear, 58-tooth (0.8 metric pitch, compatible with 32-pitch) 58-tooth spur gear (32-pitch). Traxxas spur gears let you fine-tune the performan...
View full details
Tires & wheels, assembled, glued (2.8") (All-Star chrome wheels, Alias® tires, foam inserts) (electric rear) (2) Alias® step-pin tires provide...
View full details
Steering bellcranks, drag link (blue-anodized 6061-T6 aluminum)/ 5x8mm ball bearings (4)/ hardware (assembled) Enhance steering precision, strengt...
View full details
Camber link set (plastic / non-adjustable ) ( front & rear) (gray) Non-adjustable gray composite camber link set includes front and rear links...
View full details
Screws, 3x30mm button-head machine (hex drive) (6) 3x30 mm button-head machine screws with hex drive heads. Set of six. Replacement part for thes...
View full details
Screws, 3x6mm cap-head machine (hex drive) (6)
Gear, 19-T pinion (48-pitch) / set screw 19-tooth pinion gear (48-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let y...
View full details
Carriers, stub axle (blue-anodized 6061-T6 aluminum)(rear)(2)
The Traxxas Slash 4x4 Pro-Built Rear Differential is a prebuilt replacement for Slash 4X4 Short Course Trucks. Traxxas Pro-Built parts allow you to...
View full details
This is a replacement Traxxas Caster Block Set, and is intended for use with the Traxxas Maxx Monster Truck. Features:Factory Replacement Caster Bl...
View full details
This is a set of eight Traxxas Heavy Duty Toe Link Rod Ends with pre-installed hollow balls ready for installation on the E-Revo VXL Brushless.
This is a replacement Traxxas 122.5mm Heavy Duty Steel Constant-Velocity Driveshaft; shaft only.
Gear, 15-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears) 15-tooth pinion gear (1.0 metric pitch) fits...
View full details
Traxxas Antenna Crimp Nut & Antenna Nut Tool Jato Features: Anodized Blue Aluminum crimp nut Includes: One crimping nut Nylon wrench Part...
View full details
Shock tower, rear (left & right halves) Rear shock tower halves Replacement part for these models: X-Maxx® Ultimate X-Maxx®
This is a pair of upper suspension arms for the Traxxas X-Maxx Monster Truck. Features: Molded composite plastic construction for reduced weight F...
View full details
Suspension pin set, complete (front & rear) / hardware Complete front and rear suspension pin set with hardware Replacement part for these mo...
View full details
This is an optional Traxxas Extended Wheelbase Rear Suspension Arm Set, and is intended for use with the Traxxas 1/16 E-Revo. Add 10mm of wheelbase...
View full details
Wing, 1/16 E-Revo (black)/ decal sheet 1/16 scale E-Revo® wing with decal sheet Replacement part for these models: 1/16 E-Revo® VXL 1/16 E-Revo®
Traxxas Propeller Shaft/Flex Cable DCB M41Features:Steel constructionTransfers power from the motor to the propeller Includes:Propeller Shaft/Flex ...
View full details
This is the replacement 4X3MM drive dog for the Spartan from Traxxas.Features: Aluminum constructionIncludes: Drive dog 4X3mm set screw
This is the wing mount for the Traxxas Revo 3.3.Features: Nylon construction that’s black in colorIncludes: Two Wing Supports Wing Mount Four 4mm ...
View full details
Steering arm (upper & lower)/ servo saver/ servo saver spring/ steering arm shaft Upper and lower steering arms with integrated servo saver, s...
View full details
Screws, 3x14mm button-head machine (hex drive) (6) 3x14 mm button-head machine screws with hex drive heads. Set of six. Replacement part for thes...
View full details
Connector, power tap (with voltage sensor plug)/ wire tie/ 2.6x8 BCS (2) The power tap connector plugs inline between the battery and ESC to pro...
View full details
Traxxas Maxx Front/Rear Skidplate Set. Package includes replacement front and rear skidplates. Replacement part for these models: Maxx®
The Traxxas TRX-4 Chevrolet K5 Blazer delivers scale appearance and detail like never before. The new LED Light Kit (#8038) takes scale realism to...
View full details
Sway bars (front & rear) Front and rear sway bars Replacement part for these models: Unlimited Desert Racer®
Rebuild kit, steel constant-velocity driveshaft (includes pins for 2 driveshaft assemblies (for use only with #7750X driveshaft) Rebuild kit for u...
View full details
Traxxas 7635 LaTrax Bumper Front & Rear TetonThese are the Front and Rear Bumpers for the LaTrax Teton Monster Truck from Traxxas.FEATURESPlast...
View full details
Wheel hubs, splined, 17mm, short (blue-anodized) (4)/ wheel nuts, splined, 17mm (blue-anodized) (4)/ hub retainer M4 X 0.7 (4)/ axle pin (4) (Slas...
View full details
Traxxas Aluminum Caster Blocks are CNC Machined from 6061 Aluminum, and will increase the durability of the front end of the Slash 4x4, Rustler 4x...
View full details
CS 3x10 flathead (hex drive) Set of four 3x10 mm flat-head machine screws with hex drive heads Replacement part for these models: 4-Tec® 2.0 AWD...
View full details
Clutch shoes (2)/ spring (N. Rustler/N.Sport/N.Stampede) Replacement part for these models: Nitro Rustler® Nitro Slash TRX® 2.5R TRX® 3.3 TRX® Pr...
View full details
This is the optional glow plug wrench from Traxxas.Features: Features aluminum construction and a dull silver color Will work on 7mm and 8mm glow ...
View full details
Tires & wheels, assembled, glued (2.8") (All-Star black chrome wheels, Alias® tires, foam inserts) (rear) (2) (TSM® rated) Alias® step-pin tir...
View full details
ALUMINUM CASTER BLOCKS: Traxxas aluminum caster blocks improve the appearance, ruggedness, and control on the your Traxxas model. In addition to th...
View full details
Rod Ends, short (6)/ hollow balls (6) Set of six short rod ends with hollow ball connectors Replacement part for these models: 4-Tec® 2.0 AWD Ch...
View full details
Traxxas Spinning carousel rack (includes 20 wt, 30 wt, 40 wt, 50 wt, 60 wt, 70 wt, & 80 wt premium shock oils)
This is the Motor Mount Washers and Screws for the Traxxas X-Maxx. Features: Aluminum Construction Blue in Color Exact Fit Includes: (4) W...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 4pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS
