TRA5597 Sway bars (rear) (includes soft, medium, hard)
TRAXXAS
TRA5597 Sway bars (rear) (includes soft, medium, hard)
TRA5597 Sway bars (rear) (includes soft, medium, hard)
Traxxas aluminum turnbuckle front toe link features red anodized aluminum construction. Black pre-attached ball links Includes: One aluminum link S...
View full detailsFeatures: Metal Construction, installs in gearbox behind the primary clutch assembly Black in color Includes: (1) Metal Primary Shaft (1) O...
View full detailsTraxxas Brake Cam Jato Features: Aluminum construction Silver in color Includes: One Metal Brake Cam Fits: Traxxas Nitro Jato
This is a Traxxas Differential Gear Set for the Jato. Includes:2x Output Gears2x Spider Gears1x Spider Gear Shaft
These are the rear suspension tie bars for the Traxxas Nitro Jato Stadium Truck.Features: Aluminum construction that’s blue in colorIncludes: One ...
View full detailsThis is a set of four Traxxas Suspension Down Stop Screws with a 2.5mm Drill Bit for the Jato. All R/C off-road racers want as much ground clearanc...
View full detailsTraxxas set of assembled left or right half shafts are direct replacement parts. Rubber sealed boots. Fully assembled Includes: Two assembled half ...
View full detailsThese are the left and right 25 degree aluminum steering blocks for the Traxxas Nitro Jato Stadium Truck.Features: Aluminum construction in natural...
View full detailsTraxxas Left/Right Caster & Steering Blocks 25 Deg Jato Features: Nylon construction Black in color Includes: One Left and Right 25° Caster ...
View full detailsThese are optional Left and Right 30 Degree Caster Blocksfor the Traxxas Jato.FEATURES:Silver Titanium-anodized 6061-t6 aluminum30-degreeINCLUDES:O...
View full detailsThis is a package of Threaded Ball Studs fromTraxxas for use on the Jato 2.5.These are used for the inner camber link mounting.FEATURES:Hard anodiz...
View full detailsTraxxas chassis is made of high-grade 7075-T6 aluminum construction, in a titanium anodized finish make for a chassis 40% stronger than the stock c...
View full detailsFeatures: Anodized Blue in Color 6061 T6 Aluminum Construction Countersunk Screw Holes Includes: One Blue Aluminum Chassis
This is the Rear Bumperfor the Traxxas Nitro Jato Stadium Truck.FEATURES:Plastic constructionBlack in colorINCLUDES:One Rear Bumper.
This is the Wing Mount Hardware for the Traxxas Jato.FEATURES:Nylon flanged tapered nuts.Blue anodized aluminum countersunk cap head screws.INCLUDE...
View full detailsThis is the replacement Sway Bar Linkage Front for the optionalTraxxas Revo/Revo 3.3 sway bar kit - TRAC5598.FEATURES:Nylon and metal constructionB...
View full detailsThese are the GTR Shock Bodiesfor the Traxxas Nitro Jato Stadium Truck.FEATURES:Nylon constructionGray in colorMolded Composite INCLUDES:Two Molded...
View full detailsThis is a Traxxas Hard-Anodized PTFE-Coated Aluminum GTR Shock Body. Hard-anodized and PTFE-coated aluminum shock bodies reduce internal friction f...
View full detailsThis is a replacement GTR shock body for the Traxxas Revo monster trucks. This is the stock shock body that comes in the kit.
This is a pair of Traxxas 1.4 Rate (Double Pink) GTR Shock Springs in Red for the Jato and XO-1. Traxxas offers a wide variety of spring rates for ...
View full detailsTRA5432 Spring, shock (white) (GTR) (front) (1.3 rate gold) (1 pair)
This is the super shock spring 1.2 Silver for the Traxxas Nitro Jato Stadium Truck.Features: Metal construction that’s white in color Silver weigh...
View full detailsThis is the Super Shock Spring 1.0 Tanfor the Traxxas Nitro Jato Stadium Truck.FEATURES:Metal constructionWhite in ColorTan Weight Rating 1.0INCLUD...
View full detailsThis is the super shock spring 0.7 Yellow for the Traxxas Nitro Jato Stadium Truck.Features: Metal construction that’s white in color Yellow Weigh...
View full detailsThis is the optional linkage set for the rear brake assembly on the Traxxas Revo 3.3 monster trucks. If you install the optional center differen...
View full detailsTraxxas reverse kit adds mechanical reverse to the Revo. All mechanical reverse components including the #2060 sub-micro servo and illustrated inst...
View full detailsThis is a Shift Fork/Shaft for the Traxxas Revo.FEATURES:Plastic shift fork constructionMetal shift fork shaftShift fork plastic is black in colorP...
View full detailsFEATURES: Aluminum brake cam construction Plastic brake sleeve construction INCLUDES: One brake cam Part #5388 One plastic sleeve Part #5388 SPECS:...
View full detailsTraxxas idler gear with bearing and support for the Revo. These parts install inside the transmission. Steel idler gear construction Plastic idler ...
View full detailsTraxxas package of thirty aluminum hollow balls for the Revo.Constructed of gun metal gray colored aluminum.Two tall offset aluminum hollow balls a...
View full detailsTRA5342 Tuned pipe, aluminum, blue-anodized (dual chamber with pressure fitting)/ 4mm GS
TRA5339 Insert, threaded steel (replacement inserts for Tubes) (includes (1) left and (1) right threaded insert)
FEATURES: Black nylon construction INCLUDES: One upper rear and one lower rear suspension arm REQUIRES: Removing stock suspension arms Adjusting ca...
View full detailsSuspension Arms, Right: Revo, Revo 3.3 This is the Upper and Lower Right Suspension Arm Set used in theRevo Adjustable Suspension Arm Set, TRAC534...
View full detailsThese are the front and rear red aluminum bulkhead tie bars for the Revo from Traxxas.Features: Blue anodized aluminum (2.5mm thick)Includes: One f...
View full detailsTraxxas 90º pressure fitting is constructed of polished aluminum and threaded at one end. This is the pressure fitting that is used on the Tuned Pi...
View full detailsThis is a package of flat head countersunk machine screws from Traxxas.Features: Silver metal construction Flat head Phillips drive Includes: Six...
View full detailsTRA5146 Hanger, metal (T-Maxx/S-Maxx) (TRX 2.5, 2.5R)
These are the optional lightweight 112mm toe links with rod ends for the Traxxas Maxx models.Features: 30% lighter than stock steel toe links 4 ti...
View full detailsTRA5127 Stub axle (1) (Jato) (for steel constant-velocity driveshaft)
This is the 26 tooth Reverse Output Gear Assembly for the Traxxas T-Maxx4WD Radio Control Monster Truck.This reverse output gear installs on the ou...
View full detailsTraxxas Output Gear Assembly Forward Features: Replaces stock forward output gear. Constructed of plastic. Includes: One 26 tooth forward output...
View full detailsTraxxas Gear Shaft Primary Features: Replaces stock gear shaft. Constructed of steel. Includes: One gear shaft Part Compatibility: Traxxas S-...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
MISSISSAUGA LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 5pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS