TRA2577 Screws, 3x10mm button-head machine (hex drive) (6)
TRAXXAS
Screws, 3x10mm button-head machine (hex drive) (6) 3x10 mm button-head machine screws with hex drive heads. Set of six. Replacement part for thes...
View full detailsScrews, 3x10mm button-head machine (hex drive) (6) 3x10 mm button-head machine screws with hex drive heads. Set of six. Replacement part for thes...
View full detailsJust like the heavy-duty suspension arms, X-Maxx roof skid plates use the toughest composite material. Whether you're sending it at the skate park,...
View full detailsGear, 18-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears) 18-tooth pinion gear (1.0 metric pitch) fits...
View full detailsThis is an optional Traxxas Hardened Steel Front Drive Hub, and is intended for use with the Traxxas Slash 4x4 and other Traxxas vehicles. Includes...
View full detailsUltra Shocks (grey) (xx-long) (complete w/ spring pre-load spacers & springs) (rear) (2) Traxxas oil-filled Ultra Shocks utilize X-rings for a...
View full detailsWheel hubs, hex (front) (tall offset) (2)/ axle pins (2.5x10mm) (2) 12 mm tall-offset wheel hex hubs with 2x10 mm axle pins (2) Replacement part ...
View full detailsRebuild kit, oil-filled shocks (o-ring, bladder, piston, shaft guide, E-clips, shock cap, shock rod end) renews 2 shocks Rebuild kit for LaTrax Te...
View full detailsTraxxas Sway Bar Kit Slash 4X4 Features: For front and rear application to reduce chassis roll in turns and add stability Includes: Two thick an...
View full detailsStub axles, rear (2) Set of two replacement rear stub axles Replacement part for these models: Bandit® VXL Bandit® BIGFOOT® No. 1 Officially Lic...
View full detailsRod ends, long (6)/ hollow ball connectors (6) Set of six long rod ends with hollow ball connectors Replacement part for these models: Bandit® B...
View full detailsWork Like a Prowith the Traxxas RC Stand! Designed to fit almost any 1/8 and 1/10 scale vehicle, the aluminum Traxxas RC stand is the perfect addi...
View full detailsThis is an optional Traxxas WideMaxx Steel Constant-Velocity Driveshaft Set. This is a complete upgrade, with steel constant-velocity driveshafts, ...
View full detailsScrews, 3x20mm button-head machine (hex drive) (6) 3x20 mm button-head machine screws with hex drive heads. Set of six. Replacement part for thes...
View full detailsThis is a Traxxas front lower bulkhead.Features: One-piece molded composite plastic construction Holds the steering, differential, skidplate and l...
View full detailsThis is the Traxxas pair of replacement XX-Long White Spring for the GTR shocks.Features: White colored Made of metal For the Traxxas GTR Shocks ...
View full detailsSpring retainers, upper & lower (2)/ piston head set (2-hole (2)/ 3-hole (2)) Upper and lower spring retainers for Ultra Shocks with 2-hole pi...
View full detailsThis is a pack of 12 heavy duty body clips for Traxxas vehicles. Features: Black Color Curved End to Ease Removal Includes:(12) Body Clips Body ...
View full detailsRing gear, differential/ pinion gear, differential 1/16 scale differential ring and pinion gears Replacement part for these models: 1/16 E-Revo®...
View full detailsBattery hold-down plate (grey) / metal posts (2) / body clips (2) Gray battery hold-down with metal posts (2) and retaining clips (2). Replacemen...
View full detailsTRA3678A Wheelie bar, assembled (green) (fits Stampede, Rustler, Bandit series)
Screws, 3x6mm button-head machine (hex drive) (6) 3x6 mm button-head machine screws with hex drive heads. Set of six.
This is a replacement Traxxas X-Maxx Front Bumper. Features:Factory Replacement Bumper Includes:(1) Front Bumper
Driveshaft assembly, front or rear (2) Set of two driveshaft assemblies fit front or rear Replacement part for these models: 1/18 LaTrax® Desert...
View full detailsThis is the Traxxas pair of GTR XX-Long White Shock Springs with a 1.004 Blue Compression Rate.Features: White colored Made of metal 1.004 Blue Co...
View full detailsThis is a replacement Traxxas Differential Gear Set, differential (output gears (2), spider gears (2), spider gear shaft, and carrier support) and ...
View full detailsHousings, differential, front Front differential housing halves Replacement part for these models: Ford Fiesta® ST Rally Ford® F-150® Raptor R™ ...
View full detailsSteering blocks, left & right Steering blocks, left & right Replacement part for these models: Ford Fiesta® ST Rally Ford® Fiesta® ST Ra...
View full detailsTop drive gear, steel (22-tooth) Replacement 22-tooth steel top drive gear for standard Magnum 272 transmission Replacement part for these models...
View full detailsSlipper pressure plate & hub (aluminum alloy) Replacement standard-duty aluminum alloy pressure plate and hub. Use with 5552X standard-duty cl...
View full detailsScrews, 3x12mm button-head machine (hex drive) (6) 3x12 mm button-head machine screws with hex drive heads. Set of six. Replacement par...
View full detailsPlanetary gear differential with steel ring gear (complete) (fits Bandit, Stampede®, Rustler®) Complete planetary gear differential (unassembled) ...
View full detailsDriveshafts, rear, steel-spline constant-velocity (complete assembly) (2)
Traxxas X-Maxx HD Steering Block Set - uses TRA5196A 20x32x7 bearing
This is a rear bumper for the Traxxas X-Maxx Monster Truck. Shield your vehicle from the damages of an impact from behind with this rear bumper.Fea...
View full detailsTraxxas 7730 X-Maxx Right Lower Suspension Arm This is a replacement Traxxas X-Maxx Right Lower Suspension Arm. Features: Factory Replacement Part...
View full detailsThese are the replacement nerf bars for the 2WD Traxxas Slash. replaces stock Traxxas #5823 not compatible with LCG versions of either the Slash 2...
View full detailsDriveshaft assembly (1), left or right (fully assembled, ready to install)/ 4x15mm screw pin (1) The fully-assembled driveshaft comes complete and...
View full detailsScrews, 3x12mm countersunk machine (6) (hex drive)
Silicone diaphragms (4) Silicone diaphragms (4) Replacement part for these models: 4-Tec® 2.0 AWD Chassis 4-Tec® 2.0 Brushless AWD Chassis 4-Tec...
View full detailsTraxxas Gears, Axle (Metal, Front & Rear)
Shocks, GTR xx-long blue-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2) 1/10 scale XX-long GTR shocks represe...
View full detailsThis is a pack of four replacement Traxxas X-Maxx Suspension Pin Retainer. These retainers are used on the inside of the upper arms to secure the h...
View full detailsBody mounts (posts), front & rear Front and rear body mounts Replacement part for these models: 1/18 LaTrax® Desert Prerunner 1/18 LaTrax® T...
View full detailsGear set, differential (output gears (2)/ spider gears (2)/ spider gear shaft/ diff carrier support) Differential gear set include output gears (2...
View full detailsBulkhead, front (upper and lower) Front upper and lower bulkhead halves Replacement part for these models: Maxx® Slash® Maxx®
Traxxas Complete GTR Long Shocks feature blue anodized bodies with TiN shafts. These shocks are fully assembled and ready for oil, and are compatib...
View full detailsBall bearings, blue rubber sealed (8x12x3.5mm) (2) Pair of 8x12x3.5 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
MISSISSAUGA LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 5pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS