TRA5116 Ball bearings, blue rubber sealed (5x11x4mm) (2)
TRAXXAS
This is a 2 pack of Traxxas 5x11x4mm blue rubber sealed ball bearings for the Revo. Rubber-sealed ball bearings provide smooth, long-lasting and pr...
View full detailsThis is a 2 pack of Traxxas 5x11x4mm blue rubber sealed ball bearings for the Revo. Rubber-sealed ball bearings provide smooth, long-lasting and pr...
View full detailsBody clips (12) (standard size) Standard-duty body clips. Sold as a pack of 12. Replacement part for these models: 1/16 E-Revo® VXL 1/16 E-Revo®...
View full detailsThese are a pack of 12 replacement LaTrax Body Clips perfect for 1/18 scale vehicles.Features:Silver ColorCurved end to ease removalIncludes:12 Bod...
View full detailsThese are the body clips for the Traxxas E-Maxx and T-Maxx trucks.Features: Steel construction Natural polished color Includes: Twelve Body Clips...
View full detailsSuspension pins, 2.5x31.5mm (king pins) w/ E-clips (2) (strengthens caster blocks) Replace the stock screw pins with these heavy-duty steel suspen...
View full detailsPTFE-coated washers, 5x8x0.5mm (20) (use with ball bearings) Set of 20 PTFE-coated 5x8x0.5 mm washers for use with bearings. Replacement part for...
View full detailsCooling fan, Velineon¶© VXL-3s ESC The Velineon¶© VXL-3s Accessory Cooling Fan reduces ESC temperatures during extended operation for maximum powe...
View full detailsThis is a set of 10x15mm ball bearings for use on the Traxxas Revo.Features: Steel Construction Shielded with blue rubber seals Includes: Two Bal...
View full detailsDriveshaft assembly, front, heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1) The front heavy-duty driveshaft come...
View full detailsWheel hubs, hex (2)/ stub axle pins (2) 12 mm composite hex wheel hubs (2) with axle pins (2). Replacement part for these models: BIGFOOT® No. 1...
View full detailsScrews, 3x15mm button-head machine (hex drive) (6) 3x15 mm button-head machine screws with hex drive heads. Set of six. Replacement part for thes...
View full detailsDriveshaft assembly, rear, heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1) The heavy-duty rear driveshaft comes ...
View full detailsDriveshafts, rear, steel-spline constant-velocity (complete assembly) (2) Traxxas steel constant velocity driveshafts offer the ultimate in torque...
View full detailsBody clips, black (12) (standard size) Standard-duty black body clips. Sold as a pack of 12. Replacement part for these models: 4-Tec® 2.0 AWD Ch...
View full detailsRebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (2)/ pin/ 4.0mm NL (1)/ 5.0mm NL (1)) The slipper clutch rebuild kit refreshes ...
View full detailsThese are the Suspension Screws Pins for the Traxxas Rustler, Stampede and Bandit. The hinge pins hold the suspension arms to the bulkheads.Feature...
View full detailsBig Bore shocks (hard-anodized & PTFE-coated T6 aluminum) (assembled with TiN shafts and springs) (front & rear) (4) Big Bore shocks provi...
View full detailsPowerful, Realistic Winch Capability for Traxxas TRX-4 and TRX-6 The new Pro Scale Winch puts the TRX-4 and TRX-6 even further over the top as t...
View full detailsPivot ball caps (4)/ dust boots, rubber (4)/ dust plugs, rubber (4)/ dust boot retainers, black (4), blue (4) (2 pkgs. req. to complete truck) Piv...
View full detailsOil, differential (20M wt) (standard) Super-thick 20 million weight differential oil has the consistency of thick putty and is most often used in c...
View full detailsThis is a package of two 10x15mm Ball Bearings from Traxxas.FEATURES:Steel construction with black rubber dirt shieldsUsed with Traxxas vehicles, m...
View full detailsTraxxas 48P Spur Gear (90T) Features: 48 pitch 90 tooth Designed for models with a slipper clutch Black plastic construction Includes: One spur...
View full detailsAttachment screws, shock (3x12mm shoulder screws) (6) Set of six 3x12 mm shoulder screws (shock attachment screws) with Phillips-drive heads. Rep...
View full detailsThis is a set of replacement Traxxas front and rear body posts, and are intended for use with the Traxxas 1/16 Slash, and 1/16 E-Revo vehicles. Fea...
View full detailsThis is the Traxxas Rear Chassis Brace for the E-Revo and Summit.Features: Blue colored Made of durable aluminum For the Traxxas E-Revo and Traxxa...
View full detailsBody washers (8) Body washers reinforce the mounting point surface area to help prevent body clips from pulling through the body. Replacement par...
View full detailsBearing adapter, 6061-T6 aluminum (blue-anodized) (1)/10x15x4mm ball bearing (black rubber sealed) (1) (for slipper shaft) Upgrade your slipper sh...
View full detailsBall bearings, black rubber sealed (5x11x4mm) (2) Pair of 5x11x4 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal b...
View full detailsDriveshafts, front, steel-spline constant-velocity (complete assembly) (2) Traxxas steel constant velocity driveshafts offer the ultimate in torqu...
View full detailsHold down, battery/ hold down retainer/ battery post/ foam spacer/ angled body clip (allows for installation of taller, multi-cell batteries) The ...
View full detailsWheelie bar, assembled (blue) (fits Stampede®, Rustler®, Bandit series) The patented Traxxas adjustable wheelie bar features four-position adjustm...
View full detailsSilicone grease Tube of silicone grease Replacement part for these models: Bandit® VXL Bandit® BIGFOOT® No. 1 Officially Licensed Replica Bigfoo...
View full detailsTurnbuckles, camber link, 49mm (82mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 right) Replace your non-adjustable ca...
View full detailsAntenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1) Keep your receiver antenna wire safe with this antenna tube and vinyl cap. Includes wi...
View full detailsBumper mount, front/ bumper support Front bumper mount and bumper support Replacement part for these models: X-Maxx® Ultimate X-Maxx®
Steering blocks, left & right (2) (requires 5x11x4mm bearings) Replacement left & right steering blocks. Requires 5x11x4 mm bearings. Re...
View full detailsThis is a tube of white lithium grease from Traxxas. This product can be used to lubricate parts, such as gears.Features: Great lubrication for nyl...
View full detailsStub axle pins (4) Set of four 2X10 mm stub axle pins Replacement part for these models: 4-Tec® 2.0 AWD Chassis 4-Tec® 2.0 Brushless AWD Chassis...
View full detailsLED rock light kit, TRX-4®/TRX-6™ (requires #8028 power supply and #8018, #8072, or #8080 inner fenders) Traxxas LED Rock Lights install directl...
View full detailsShock caps, aluminum (blue-anodized) (4) (fits all Ultra Shocks) Aluminum shock caps are great way to boost the durability and style of any Traxxas...
View full detailsRebuild kit (heavy duty), slipper clutch (steel disc/ aluminum friction pads (3)/ spring (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1)) T...
View full detailsBall bearings, blue rubber sealed (6x12x4mm) (2) Pair of 6x12x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out...
View full detailsSuspension pins, 44mm (2) w/ E-clips 44 mm chrome suspension pins (2). Includes E-clips (4). Replace the stock screw pins with these heavy-duty st...
View full detailsBall bearings, blue rubber sealed (8x16x5mm) (2) Pair of 8x16x5 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out...
View full detailsTurnbuckles, camber link, 39mm (69mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 right) Replace your non-adjustable re...
View full detailsBody clip (mounting clip), angled, 90-degrees (10) 90-degree mounting clips are perfect for battery latches, making battery access quick and easy...
View full detailsBall bearings, blue rubber sealed (12x18x4mm) (2) Pair of 12x18x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime o...
View full detailsSpur gear, 83-tooth (48-pitch) (for models with Torque Control slipper clutch) 83-tooth spur gear (48-pitch) for Torque Control slipper clutches. ...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
MISSISSAUGA LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 5pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS