TRA9215 Traxxas Body cage (fits #9211 body)
TRAXXAS
TRA9215 Traxxas Body cage (fits #9211 body)
TRA9215 Traxxas Body cage (fits #9211 body)
Cable, T-lock (front) Replacement front differential T-Lock cable for TRX-4® and TRX-6® models. Replacement part for these models: TRX-4® 1972 C...
View full details
Driveshaft assembly (1), left or right (fully assembled, ready to install)/ 4x15mm screw pin (1) The fully-assembled driveshaft comes complete and...
View full details
Box, receiver (sealed)/ foam pad/2.5x8mm CS (4)/ 3x10mm CS (2) Sealed receiver box for Traxxas micro receivers. Includes foam pad, silicone seal...
View full details
TRA9558 Traxxas Driveshaft, front, steel constant-velocity (shaft only,
Traxxas 8633R Suspension Arms Red Rear (Right) Adjustable Wheelbase E-RevoIncludes:Suspension arms, red, rear (right), heavy duty, adjustable whee...
View full details
Driveshaft assembly (1), left or right (fully assembled, ready to install)/ screw pin (1) Fortified for hard launches and superior durability, Ex...
View full details
Wheel nuts, splined, 17mm, serrated (blue-anodized) (4) Set of four 17 mm wheel nuts are serrated for extra bite on the wheel to keep them snug no...
View full details
This is a Traxxas Steering Bellcranks/bellcrank Support/Servo Saver.Features: Molded composite plastic construction and Steel servo saver springInc...
View full details
This is the Replacement Backplate for the Traxxas 2.5 engine.This backplate is used on the 2.5 equipped with EZ starter.FEATURES:Aluminum construct...
View full details
This is a set of Traxxas Maxx’s extreme-duty cold-weather suspension arms, available in 6 colors to allow you to customize your truck to your style...
View full details
Traxxas Driveshaft, center, aluminum (fits Maxx V2 with extended chassis (352mm wheelbase))
Bulkhead, front (upper and lower) Front upper and lower bulkhead halves Replacement part for these models: Maxx® Slash® Maxx®
This is the ring gear and parts for the Traxxas T-Maxx 4WD Radio Control Monster Truck. These ring and pinion gears are installed in the front diff...
View full details
This is a replacement Traxxas 122.5mm Heavy Duty Steel Constant-Velocity Driveshaft; shaft only.
Box, receiver (sealed)/ foam pad/ 2.5x8mm CS (4)/ 3x10mm CS (2)Replacement part for these models:Rustler 4X4 VXLRustler 4X4
TRA9533X Traxxas Suspension arm, rear (right), blue
Steering arm (upper & lower)/ steering link/ servo horn/ servo saver/ servo saver spring/ servo horn mount/ ball stud (2)/ shock mounts, front...
View full details
Box, receiver (sealed)/ foam pad/ silicone grease/ 3x8mm BCS (2)/ 2.5x8mm CS (2)/ 3x6mm BCS (2) Waterproof receiver box includes foam pad, silic...
View full details
TRA9534 Traxxas Suspension arm, rear (left), black
TRA8841 Traxxas Cable, T-lock (rear) (6X6)
This is the Traxxas slipper clutch rebuild kit.Includes: Two steel disc Two friction insert 4.0mm NL Two spring washers
TRA5041 Traxxas Grease, premium high performance (20cc)
This is a set of Traxxas Maxx’s extreme-duty cold-weather suspension arms, available in 6 colors to allow you to customize your truck to your style...
View full details
TRA9532 Traxxas Caster blocks (c-hub), left & right/ kingpin bushings (4
TRA9534X Traxxas Suspension arm, rear (left), blue
This is a replacement pack of Traxxas 72mm GT-Maxx Steel Shock Shaft with a chrome finish with Rod Ends, intended for use with the Maxx 1/10 Brush...
View full details
Wheel nuts, splined, 17mm, serrated (black-anodized) (4) Set of four 17 mm wheel nuts are serrated for extra bite on the wheel to keep them snug n...
View full details
Bumper, front, winch, TRX-4® Sport (includes bumper mount, D-Rings, fairlead, hardware) (fits TRX-4® Sport with 8855 winch) (191mm wide)Accessory p...
View full details
Wheel nuts, splined, 17mm, serrated (red-anodized) (4) Set of four 17 mm wheel nuts are serrated for extra bite on the wheel to keep them snug n...
View full details
This is a Traxxas Aluminum Center Driveshaft Assembly.Features: Aluminum construction with natural silver colored finish Double sided steel gear m...
View full details
This is a replacement set of Body Mounts for the Front and Rear of the Traxxas Rustler 4x4 VXL. Features:Factory replacement Part Includes: (1) Fr...
View full details
Drive cup (1)/ 3x8mm CS (for use only with #7750X driveshaft) X-Maxx® drive cup with 3x8 mm set screw. For use with 8s-spec heavy duty driveshaft ...
View full details
Suspension arms, front (right), heavy duty (upper (1)/ lower (1)) Heavy-duty E-Revo® suspension arms utilize our latest proprietary composite mat...
View full details
Ring gear, differential/ pinion gear, differential 1/16 scale differential ring and pinion gears Replacement part for these models: 1/16 E-Revo®...
View full details
Ball bearings, blue rubber sealed (4x8x3mm) (8) Set of eight 4x8x3 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime ...
View full details
This is a front winch bumper that fits that Traxxas TRX-4 1979 Bronco & Blazer with 8855 winch. Features: D-rings Fairlead Includes: (...
View full details
Turnbuckles, aluminum (red-anodized), toe links, 59mm (2) (assembled with rod ends & hollow balls) (requires 5mm aluminum wrench #5477)
This is a set replacement rear upper and lower bulkheads intended for the Traxxas Maxx vehicle. Features:Factory Replacement Bulkheads Includes: (...
View full details
This is the outer driveshaft assembly for the VXL Summit from Traxxas.Features: Metal constructionIncludes: Driveshaft assemblyRequires: Installati...
View full details
This is the inner driveshaft assembly for the VXL from Traxxas.Features: Plastic constructionIncludes: Inner Shaft assembly and M2x8 Screw PinRequi...
View full details
Traxxas motor mount is constructed of silver aluminum. Replaces damaged motor mount. Requires: Motor Mount Hinge Post Specs:Length: 58.2mm (2.29")W...
View full details
The Traxxas E-Revo 2.0 Heavy-Duty Rear Left Suspension Arm Set features a design which incorporates latest proprietary composite material. Traxxas ...
View full details
This is a set of Traxxas Maxx’s extreme-duty cold-weather suspension arms, available in 6 colors to allow you to customize your truck to your style...
View full details
This is the Heavy Duty Rear Left Suspension arms for the E-Revo VXL Brushless by Traxxas. Part # 8934X Features: Heavy Duty Blue in color ...
View full details
Bumper, front, winch, narrow (includes bumper mount, D-Rings, fairlead, hardware) (fits TRX-4® Land Rover® Defender® and Tactical Unit with 8855 wi...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 4pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS