Traxxas assembled tuned pipe is made of molded composite construction with rubber header gasket. Black in color Includes: One Molded Composite Tune...
View full details
Traxxas 7668X Wheel Nut Washer Aluminum Orange 3x12mm CS (4) LaTrax Teton / SST These are the Wheel Nut Washers for the LaTrax Teton Monster Truck ...
View full details
This is a set of four Traxxas Machined Aluminum Wheel Nut Washers in Red with four 3x12mm Cap Screws for the 1/18 scale LaTrax Desert PreRunner. Fe...
View full details
These are the optional wheel nut washers for the LaTrax Teton Monster Truck from Traxxas.Features: Green colored Made of aluminum For the LaTrax T...
View full details
This is the Traxxas ExoCage, 1/16th Summit (includes mounting hardware). This is Traxxas part number 7220Part Number: 7220 / TRA7220Fits1/16 Summit...
View full details
This is a replacement Traxxas Steel Driveshaft Rebuild Kit, and is intended for use with the Traxxas 1/16 E-Revo and Slash trucks, as well as the 1...
View full details
This is a replacement Traxxas Center Differential Gear Set, and is intended for use with the Traxxas Slash 4x4.
This is the Traxxas Complete High Stall Clutch Gear for the Telluride 4x4.Features: Black and silver/grey colored Made of tough plastic and steel ...
View full details
Bulkhead, Rear (Left & Right Halves) for Summit Replacement Part For: Summit (Model# 56076-4)
This is the front bulkhead for use on the Traxxas Summit Truck RTR.Features: Nylon construction that is black in colorIncludes: One Front Bulkhead ...
View full details
This is the Plastic Tuned Pipe for use with the Traxxas 2.5 and 2.5R engine equipped vehicles.FEATURES:Black plastic constructionDirect replacem...
View full details
Exhaust header Replacement part for these models: TRX® Pro .15
This is a replacement Traxxas Unlimited Desert Racer Motor Mount, with two included pins. Features:Factory Replacement Mount Includes: (1) Motor M...
View full details
TRA9545 Traxxas Servo saver/ servo saver spring/ servo horn, steering (assembled)
This is an optional pack of four Traxxas Fender Extensions, intended for use with TRX-4 and TRX-6 Kits. Includes: (4) Fender extensions (24) 3x8...
View full details
The Traxxas TRX-4 1972 Chevrolet Blazer Grille is a great way to add the classic 1972 grille to your Traxxas TRX4 equipped with the optional 1972 B...
View full details
TRA8870X Traxxas Fairlead, winch, aluminum (blue-anodized)
TRA8870R Traxxas Fairlead, winch, aluminum (red-anodized)
Spur gear, steel, 54-tooth (0.8 metric pitch, compatible with 32-pitch) (for center differential) The 54-tooth steel spur gear (32-pitch) fits the...
View full details
Rod end set, complete (standard (10), angled 10-degrees (8), offset (4)) Rod end set features standard rod ends (10), 10-degree angled rod ends ...
View full details
Traxxas 7541 LaTrax Rally Bushings 4x8x3mm (2) 6x10x3mm (8) 8x12x3.5mm (5)This is the Bushing Set for the Latrax Rally Car from Traxxas.FEATURESNyl...
View full details
Input shaft/ drive gear assembly, lightweight (18/ 13-tooth top gear) (hard-anodized/PTFE-coated 7075 T6 aluminum gears)
This is the black wing for the Traxxas Revo 3.3. This part attaches to the rear of the body.Features: Plastic construction that’s black in colorInc...
View full details
This is a replacement Traxxas Maxx Driveshaft Assembly, intended for use with the Maxx 1/10 Brushless 4WD Monster Truck. Features: Factory Replac...
View full details
Shock caps, aluminum (blue-anodized) (4) (fits all Ultra Shocks) Aluminum shock caps are great way to boost the durability and style of any Traxxas...
View full details
Traxxas high volume air filter body for the Maxx Trucks. Replaces damaged or dirty air filter assemblies Plastic body with foam element and rubber ...
View full details
Air filter body (high-volume)/ filter support/ cap/ foam filter, pre-filter/ Revo® air filter base (angled)/wire mount/hardware (1 each) (TRX® Eng...
View full details
This is a replacement part for the Traxxas Unlimited Desert Racer. Features:Factory Replacement Part Includes:(2) Trailing Arms
This is the White Wing for the Traxxas Revo 3.3.This part attaches to the rear of the body.FEATURES:Plastic construction, white in colorINCLUDES:On...
View full details
Traxxas TRX-4 Chevrolet Blazer Front Bumper. Package includes replacement chrome bumper, bumper mount and lenses.
This is the replacement primary clutch assembly for the Traxxas Revo. This part is located within the two-speed transmission.Features: Aluminum and...
View full details
TRA9490X Traxxas Plate, motor, blue (4mm thick) (aluminum)
TRA9490R Traxxas Plate, motor, red (4mm thick) (aluminum)
TRA9096 Traxxas Bumper, front (with LED lights) (replacement for #9035)
TRA8840 Traxxas Cable, T-lock, 4XL (417mm)
This is a pair of Traxxas Steel Constant Velocity Driveshaft Inner Drive Cups with Screw Pins for the Ford GT, Mustang GT and the 4-Tec 2.0 chassis.
This is the 24-Tooth High Range Metal Output Gear for the Traxxas TRX-4. and TRX-6 Features: Metal in Construction Includes: (1) Output Ge...
View full details
FEATURES: Black plastic constructionINCLUDES: Two Gearbox halves (Front and Rear) One 40mm Guide Pin Five 3x12mm Roundhead Self-Tapping Screws Two ...
View full details
This is a set of two replacement short black ultra shocks from Traxxas. Includes part to build two shocks.
These are the optional aluminum push rods for the Traxxas Slayer Pro 4WD Short Course Nitro RTR.Features: Aluminum construction with Nylon rod ends...
View full details
This is a pair of Traxxas optional red aluminum pushrods for the rocker arms on the REVO. These go between the rocker arms and the lower suspension...
View full details
Convert your Traxxas Revo to forward only with this Forward Only Conversion Kit. All parts required to convert the Revo to forward only INCLUDES: O...
View full details
This is the aluminum rocker arm post set for the Traxxas Revo. It provides a pivot point for the suspension/shock rocker arms.Features: Aluminum c...
View full details
TRA9355 Traxxas Driveshaft, center, steel (266mm)/ pin/ support, center
This is a replacement Traxxas 96mm Unlimited Desert Racer Steel Constant-Velocity Driveshaft Bone. Features:Factory Replacement Part Includes:(1) D...
View full details
Steering bellcranks/ servo saver/ servo saver spring/ servo spring retainer/servo horn, steering Steering bellcrank set features bellcrank, servo ...
View full details
This is an optional Traxxas "Long" Temperature & Voltage Sensor. Temperature data is critical to monitoring performance, gauging the effects of...
View full details
