This is a replacement Traxxas Rear Upper and Lower Bulkhead Set, for use with the TRA8622 Chassis only. This set includes the upper and lower bulkh...
View full details
These are the Traxxas Ball Bearings for the LaTrax Rally Car.Features: Silver/grey colored Made of Steel for a long life time Replaces all bushing...
View full details
This is the Traxxas upper and lower front bulkhead for the E-Revo VXL Includes: Six 4x12mm BCS Requires: TRA8622 chassis
This is a 5.1oz (150cc) complete fuel tank from Traxxas. Holds and distributes the fuel to the carb.Features: Plastic construction Tight spring on...
View full details
This is the Replacement Drive Hub Assembly for the Traxxas T-Maxx 4WD Radio Control Monster Truck.This drive hub assembly fits into the spur gear a...
View full details
Traxxas optional adjustable suspension arm allows wheelbase adjustment depending on track conditions and driver preference. Forward pivot ball hole...
View full details
Traxxas carburetor body, fuel inlet plug, and three o-rings. The carburetor body is constructed of composite material, inlet plug is aluminum, and ...
View full details
This is a pair of GTR Composite Shocks for the Traxxas NHRA Funny Car, TRAD69**FEATURES:Composite bodyAssembledINCLUDES:Two GTR Composite ShocksBot...
View full details
This is the Traxxas pair of Composite GTR Shocks for the Traxxas Rally VXL.Features: Black in color Composite construction Fully assembled - with ...
View full details
This is the Traxxas Rubber Vibration Cushion for the 150cc Fuel Tank on the Nitro Slash.Features: Made of rubber For the Traxxas Nitro Slash Incl...
View full details
This is the Lower Left Suspension Arm and satin black chrome-plated Insert for the Traxxas Unlimited Desert Racer (UDR). Part # 8533X Features:...
View full details
This is a replacement Traxxas Short Ultra Shocks for the 4-Tec 2.0. This shock set includes all necessary parts for two shocks, minus springs. This...
View full details
This is a Traxxas TRX-4 1979 Chevrolet Blazer Grille, intended as a replacement for the part supplied with the TRX-4 Chevrolet Blazer Kit and as ...
View full details
Control box (complete) (EZ-Start® 2) Replacement starter control box for the EZ-Start® 2 starter. Replacement part for these models: Jato® Nitro...
View full details
This is the replacement Rear Differential Ring Gear and Differential Pinion Gear for the Traxxas Maxx. Includes: (1) Differential Ring Gear (1)...
View full details
Spare tire mount/ mounting bracket/ spare tire cover/ mounting hardware Replica spare tire for the TRX-4® 1979 Ford® Bronco body. Includes mount, ...
View full details
Traxxas Differential Ring Gear/Pinion Gear Features: Direct replacement part Includes: One differential ring gear One pinion gear Fits: Traxx...
View full details
Bulkhead, rear (L&R halves)/ diff retainer, rear/ 4x14mm BCS (2) Rear left and right bulkhead halves with differential retainer and 4x14 screw...
View full details
Wheelie bar, assembled (red) (fits Slash, Bandit®, Rustler®, Stampede® series)The patented Traxxas adjustable wheelie bar features four-position ad...
View full details
Fender flares, front & rear (2 each)/ flare mounts (4)/ 2x8 CS (24) (fits #9211 body)
This is the motor and pinion gear for the Traxxas EZ Start 2 (R) System.Features: Pre-installed 10 tooth pinion gearIncludes: Motor and Pinion Gear...
View full details
This is a replacement Traxxas X-Maxx Aluminum Stub Axle. This anodized aluminum stub axle is for use with 8s-spec heavy duty driveshaft (TRA7750X) ...
View full details
This is an Installation Kit for use with the Pro Scale® Advanced Lighting Control System in the TRX-4® Sport, TRX-4 1979 Chevrolet Blazer and TR...
View full details
TRA9587 Traxxas Drive cup, front or rear (hardened steel) (for different
Wheelie bar, assembled (blue) (fits Stampede®, Rustler®, Bandit series) The patented Traxxas adjustable wheelie bar features four-position adjustm...
View full details
Planetary gear differential with steel ring gear (complete) (fits Bandit, Stampede®, Rustler®) Complete planetary gear differential (unassembled) ...
View full details
This is a pack of two replacement LaTrax Oil Shocks with Springs. These shocks are factory assembled, and include a bottle of 20wt silicone shock o...
View full details
TRA3678A Wheelie bar, assembled (green) (fits Stampede, Rustler, Bandit series)
Oil, differential (20M wt) (standard) Super-thick 20 million weight differential oil has the consistency of thick putty and is most often used in c...
View full details
Stub axle, aluminum, (green-anodized) (1) (for use only with #7750X or 7896 driveshaft) Add a touch of style to your X-Maxx® or XRT® with this br...
View full details
This is a Traxxas front lower bulkhead.Features: One-piece molded composite plastic construction Holds the steering, differential, skidplate and l...
View full details
This is the replacement Traxxas Rear Ring and Pinion Gear for the Stampede 4x4. This set features a 12 tooth pinion and 47 tooth ring gear, and is ...
View full details
This is a replacement Traxxas Differential Gear Set, differential (output gears (2), spider gears (2), spider gear shaft, and carrier support) and ...
View full details
This is a replacement Traxxas X-Maxx Aluminum Stub Axle. This anodized aluminum stub axle is for use with 8s-spec heavy duty driveshaft (TRA7750X...
View full details
This is the chassis for use on the Traxxas 1/16 E-Revo and Slash VXL vehicles.Features: Nylon construction that is grey in colorIncludes: One Chass...
View full details
This is a replacement differential ring and pinion gear set for the Traxxas TRX-4. Package contains one ring gear and one pinion gear. Features:F...
View full details
Stub axle, aluminum (black-anodized) (1) (for use only with #7750X or 7896 driveshaft) Add a touch of style to your X-Maxx® or XRT® with this br...
View full details
TRA9527 Traxxas Tie bars, front, 6061-T6 aluminum (blue-anodized) (fits Sledge)
FEATURES: Constructed of aluminum. INCLUDES: One Traxxas Exhaust Header Set for the Nitro 4-Tec and the Nitro Sport with: One Pipe Two 3mm x 25mm S...
View full details
Turnbuckles, titanium 94mm (front tie rods) (2)/ billet aluminum wrench
Output drive, transmission or differential (pin retainer (1)/ drive cup (1)/ drive ball (1)/ drive pin (1)/ 3x10 screw pin (1)/ cross pin (black) ...
View full details
TRA8849 Traxxas Output drive, transmission or differential (pin retainer
