ALUMINUM CASTER BLOCKS: Traxxas aluminum caster blocks improve the appearance, ruggedness, and control on the your Traxxas model. In addition to th...
View full details
These are the optional aluminum push rods for use on the Traxxas 1/16 E-Revo VXL 4WD Brushless RTR.Features: Aluminum construction that’s anodized ...
View full details
Wheelie bar, assembled (fits all 1/10th scale Revo® trucks) The accessory Revo® wheelie bar is easy to install for controlled wheelies on demand w...
View full details
Wheel hubs, splined, 17mm (red-anodized) (4)/ 4x5 GS (4), 3x14mm pin (4) Set of four 17 mm red-anodized aluminum wheel hubs combine high-profile l...
View full details
Caster blocks, 30-degree, red-anodized 6061-T6 aluminum (left & right)/ suspension screw pin (2) Red aluminum 30° caster blocks improve the a...
View full details
Carrier, differential (aluminum)/ (requires #7783X spider gear shaft) Aluminum differential carrier includes X-ring gaskets (2), ring gear gasket,...
View full details
This is the Exo-carbon wing for the Traxxas Revo 3.3. This part attaches to the rear of the body.Features: Plastic construction, exo-carbon finish ...
View full details
Traxxas REVO racing vented steel brake disc. Revo already delivers class-leading braking performance, but this high performance vented steel brake ...
View full details
This is the Traxxas TRX-4 Scale Crawler Differential Gear Set. This set consists of 2 diff output gears, 4 spider gears, and 2 spider gear shafts.I...
View full details
This is the aluminum exhaust header spring mount for the Traxxas 2.5, 2.5R and 3.3 Engines.Features: Aluminum construction that’s silver in color ...
View full details
Wheelie bar, assembled (fits all T-Maxx®/E-Maxx® trucks) The Maxx® wheelie bar has 4 snap-in adjustment positions that allow you to choose how ext...
View full details
This is the Exhaust Header for the Traxxas T-Maxx Kit with the .15 engine.This part is attached to the engine.FEATURES:Blue anodized aluminum heade...
View full details
FEATURES:Machined Light-Weight Aluminum construction, anodized blueINCLUDES:Aluminum Servo Mounts (left and right)4 3x10 Buttonhead Cap Screws4 3x8...
View full details
FEATURES: Aluminum construction, gun metal gray in color INCLUDES: Chassis Brace
These are aluminum hex wheel hubs for the T-Maxx and E-Maxx Truck kits.Features: Blue anodized Machined 6061 T-6 aluminum construction Packaged in...
View full details
Traxxas Slash 4X4 Ultimate Chassis. This replacement chassis is intended for the Traxxas Slash 4X4 Ultimate. Package includes one chassis.
This is the Blue Anodized Aluminum Spring Retainer (adjuster) for the Traxxas GT-Maxx Shocks. Features: Anodized Aluminum Blue in Color In...
View full details
This is the Traxxas aluminum differential carrier for the E-Revo VXL Includes: Two X-ring gaskets Ring gear gasket Four spacers 12.2x18x0.5 MW shim
Accessory part for these models: Bigfoot© No. 1 Officially Licensed Replica Bigfoot© Officially Licensed Replica Ford F-150 Raptor Nitro Slash Ru...
View full details
This is a replacement Traxxas Low-CG Chassis, and is intended for use with the Traxxas 1/10 Rally Racer and the Slash 4x4 Ultimate 1/10 scale short...
View full details
Differential output yokes, hardened steel (w/ U-joints) (2) Hardened steel differential output yokes provide extra strength for 2WD models using m...
View full details
This is a replacement Traxxas Long Wheelbase Chassis. Even at maximum speed, E-Maxx feels stable and controlled thanks to its extra-long 335mm whee...
View full details
TRA9113 Traxxas Decal sheets, Chevrolet Blazer (1969 -1972)
This Rear Upper Suspension Link is constructed out of Heavy Duty Steel measuring 7x206mm center to center and comes assembled with hollow balls. Fe...
View full details
This is the Titan 21-turn 550 motor for the Traxxas E-Maxx. The Titan 550 is a 21-turn fan-cooled 550 size motor capable of handling 14.4 volts. Th...
View full details
TRA4919X Servo mounts, throttle/ brake (machined aluminum) (blue) (f&r)
This is an optional Traxxas Slash 2WD LCG Chassis. This grey chassis will allow you to personalize the look of your Traxxas Slash 2wd, Raptor, or R...
View full details
This is Traxxas TRX-4 2021 Ford Bronco Front Rear Inner Fenders Set. Features: For: Traxxas TRX-4 2021 Ford Bronco Material: Plastic Color: Bla...
View full details
Ultra Shocks (grey) (long) (complete w/ spring pre-load spacers & springs) (2) Traxxas oil-filled Ultra Shocks utilize X-rings for a perfect s...
View full details
This is a replacement Traxxas Maxx Front Ring and Pinion Gear, intended for use with the Maxx 1/10 Brushless 4WD Monster Truck.
This is a replacement decal sheet intended for the Mercedes-Benz G 500 4x4² TRX-4 Body. Features:Factory Replacement Decal Sheet Includes:(1) Compl...
View full details
Ultra Shocks (black) (long) (complete w/ spring pre-load spacers & springs) (front) (2) Traxxas oil-filled Ultra Shocks utilize X-rings for a ...
View full details
Spur gear, 54-tooth, steel (1.0 metric pitch) 54-tooth spur gear (1.0 metric pitch) has steel teeth for superior power handling and durability. ...
View full details
Fenders, inner (narrow), front & rear (2 each)/ rock light covers (8)/ battery plate/ body mount/ 3x8 flat-head screws (4)/ 2.5x6 CS (10) Narr...
View full details
Shock shafts, GTX, 110mm (assembled with rod ends & hollow balls) (steel, chrome finish) (2) Pair of replacement 110 mm steel shock shafts wit...
View full details
This is a replacement Traxxas Maxx Differential Gear Set. This set output gears, spider gears, shafts, and pins. Features:Factory Replacement Diff...
View full details
This is a replacement Traxxas Chassis, and is intended for use with the Traxxas Stampede 4X4.
TRA9582 Traxxas Output gears, differential, hardened steel
This rear bumper with LED lights by Traxxas is a replacement for TRA9036 rear bumper.
This is a set of factory replacement body mounts from Traxxas for the Hoss 4x4 VXL. Features:Factory Replacement Body Mounts Includes: Front and R...
View full details
This is the Drag Link w/Bearingfor the Traxxas Nitro Jato Stadium Truck.FEATURES:Aluminum ConstructionAnodized Blue in ColorINCLUDES:One Drag Link ...
View full details
This is a replacement Traxxas Rear Ring Gear and Pinion Gear Set for the Unlimited Desert Racer. This set is for use in the rear axle only.
Driveshaft, steel constant-velocity (heavy duty, shaft only, 160mm) (1) (replacing #7750 also requires #7751X, #7754X and #7768 or #7768R) Heavy-d...
View full details
Suspension pin set, front & rear (hardened steel), 4x67mm (4), 3.5x48.2mm (2), 3.5x56.7mm (2)/ M3x0.5mm NL, flanged (4) The front and rear har...
View full details
