Traxxas shock bodies for use on the GTR Shocks. Constructed of black molded composite material.Requires: Installing all shock components into shock...
View full details
This is the Traxxas 4-Tec 2.0 Motor Plate. This fits all 4-Tec 2.0 cars, including the Ford GT and Mustang GT.Stock Replacement On4-Tec 2.0 VXL Cha...
View full details
This is a 48-pitch 84-tooth spur gear from Traxxas. The gear is molded from black plastic. This spur gear is for use with Traxxas' slipper clutch.I...
View full details
This is the optional tall battery hold down retainer for the Traxxas XO-1 on-road car.Features: Allows the installation of taller multi-cell batter...
View full details
TRA5282 Screws, 3x12mm button-head machine (6)
Screws, 3x14mm button-head machine (hex drive) (6) 3x14 mm button-head machine screws with hex drive heads. Set of six. Replacement part for thes...
View full details
Traxxas XO-1 Mod 1 Spur Gears are available in 46, 50 or 54 tooth count options to fine tune the gear ratio of your model, this is a 46 tooth Spur ...
View full details
These are the 6x9.6mm X-ring Seals for the Traxxas Unlimited Desert Racer. Includes 4 seals.
This is the Differential Rebuild Kit for the Traxxas 1/16 scale VXL series.FEATURES:Nylon and rubber constructionINCLUDES:Two Diff Gear CoversTwo L...
View full details
Spur gear (66-Tooth) (32-Pitch) w/bushing
This is the Pull Ring and Fuel Tank Capfor the Traxxas Nitro Jato Stadium Truck.FEATURESNylon constructionBlack in color INCLUDESOne Pull RingOne F...
View full details
Spur gear, 86-tooth (48-pitch) (for models with Torque-Control slipper clutch) 86-tooth spur gear (48-pitch) for Torque Control slipper clutches. ...
View full details
This is a replacement Traxxas TRX-4 Jack with one mounting screw. Note: Pictures are for reference only. Features: Factory Replacement Jack Availa...
View full details
Screws, 4x30mm countersunk machine (hex drive) (6)
Traxxas Gear Shaft Primary Features: Replaces stock gear shaft. Constructed of steel. Includes: One gear shaft Part Compatibility: Traxxas S-...
View full details
This is a package of six 4x18mm Button Head Machine Screws from Traxxas.FEATURES:Steel construction, black in colorINCLUDES:Six 4x18mm Button Head ...
View full details
This is a replacement Traxxas TRX-4 Motor Plate and Upper Spur Gear Cover. Features: Factory Replacement Part Nylon Construction Includes: (1) ...
View full details
These are the Traxxas Front/Rear Plastic Non-Adjustable Camber Links for the Telluride 4x4.Features: Grey colored Made of tough plastic Fits the f...
View full details
Body clip (mounting clip), angled, 90-degrees (10) 90-degree mounting clips are perfect for battery latches, making battery access quick and easy...
View full details
This is a replacement Traxxas Drive Wheel. This is for use with the Traxxas TRX-4 All Terrain "Traxx" TRA8880. Features: Factory Replacement Drive...
View full details
This is a replacement Traxxas 39 Tooth TRX-4 Spur Gear.
These are the Traxxas 4-Tec 2.0 Red Front and Rear Brake Calipers. These work on all 4-Tec 2.0 cars, including the Ford GT and Mustang GT.Stock Rep...
View full details
This is the toe link tie bar from Traxxas. It fits all Traxxas Maxx vehicles.Features: Nylon construction that is black in colorIncludes: One Toe ...
View full details
This is the output gear 33T for the Traxxas E-Maxx truck.Features: Black nylon constructionIncludes: One 33T output gear and two spacersRequires: S...
View full details
This is a replacement Traxxas ESC/Receiver Mounting Plate, intended for use with the installation of the Traxxas XL-5 or XL-10 Electronic Speed Con...
View full details
Gear, 18-T pinion (48-pitch) / set screw 18-Tooth Pinion Gear (48-Pitch) fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let y...
View full details
Shock shafts, steel, chrome finish (X-long) (2)
Screws, 3x10 button-head machine (hex drive) (stainless steel)(6)
This is the Shock Mount Lower and Wire RetainerFor the Traxxas Funny CarsFEATURES:Black plasticINCLUDES:One shock mountOne wire retainerCOMMENTS:Th...
View full details
This is the Traxxas Gear, 26-T pinion (48-pitch, 2.3mm shaft)/ set screw. This is Traxxas part number 7040Part Number: 7040 / TRA7040Fits1/16 E-Rev...
View full details
Screws, 2.5x14mm cap-head machine (hex drive) (6)
Features: Black plastic, slipper clutch style spur gear Includes: one 72 tooth spur gear Technical Specifications: Tooth: 72Pitch: 32
This is a 48 pitch 78 tooth spur gear from traxxas. The gear is molded fromwhite plastic. This spur gear is for use with Traxxas' slipper clutch.In...
View full details
Differential bevel gear set (3-small & 2-large side bevel gears)
Spur gear, 70-tooth 70-tooth spur gear (48-pitch). Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear rat...
View full details
This is the Composite Brake Disc for the Traxxas Nitro Slash SC, TRAD77**.FEATURES:Replaces worn brake discsINCLUDES:Brake DiscSteel Adapter
Screws, 4x22mm button-head machine (hex drive) (6)
Gear, 21-T pinion (48-pitch) / set screw 21-tooth pinion gear (48-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let y...
View full details
This is the Rear Chassis Brace Gear Cover & Wire Retainer for the Traxxas 4-Tec 2.0. Includes: (1) Gear Cover with Chassis Brace (1) Wire ...
View full details
Traxxas rubber shock boots have rubber construction, blue in color and flexible material. Includes: Two Blue rubber Shock Boots and Two black Plast...
View full details
Wedges, anti-squat (1.5 & 3.0 degree) (2 each)
Includes: (2) 29mm Front Steel Shock Shafts, Chrome Finish Accessory Part For: 4-Tec® 2.0 AWD Chassis 4-Tec® 2.0 VXL AWD Chassis Ford GT...
View full details
