TRA8353 Drive cups, inner (2)/ screw pins (2)
TRAXXAS
This is a set of inner drive cups and screw pins for the Traxxas Ford GT 4Tec.
This is a set of inner drive cups and screw pins for the Traxxas Ford GT 4Tec.
This is the motor cover plate for the Traxxas 1/16 scale Fiesta and Kyle Busch Race Truck.Features: Composite constructionIncludes: Motor Cover Mo...
View full details
This is the housing for the front and rear differential on the Traxxas Summit Truck RTR.Features: Nylon construction that is black in colorIncludes...
View full details
This is the Traxxas 1/10 Maxx Waterproof Receiver Box Seal Kit with O-ring, Seals, and Silicone Grease Stock Replacement OnMaxx 4S
This is a set of two replacement differential output yokes from Traxxas. These yokes attach to the differential, and the half shafts that drive the...
View full details
This is the Traxxas Camber rods, 2-degree/3-degree (6 each). This is Traxxas part number 7539Part Number: 7539 / TRA7539FitsLaTrax Rally
Caster blocks (left & right) (30-degree) Replacement left and right 30° caster blocks Replacement part for these models: Bandit® VXL Bandit®...
View full details
This is the Replacement Steel Constant Velosity Driveshaft Rebuild Kit for Unlimited Desert Racer. Includes: (2) Drive Pin (2) Cross Pin
This is the optional 11 Tooth Pinion Gear for the Traxxas X-Maxx.FEATURES:Hardened steel constructionReplaces stock 6491X 18T pinion gearCompatible...
View full details
This is a replacement Idle Mixture Screw for theTraxxas TRX 2.5 Carb (TRAG5252).FEATURES:Pre-installed gasketINCLUDES:One NeedleSPECS:Length: 13.8 ...
View full details
This is the Rear Bumper and Rear Body Mount for the Traxxas 4-Tec 2.0 AWD Chassis and Ford GT. Includes: (1) Rear Bumper (1) Rear Body Mount ...
View full details
This is the fuel tank rebuild kit for the Traxxas Rustler.Features: Direct fit replacement partsIncludes: Tank cap Tank seal Tank cap spring Small...
View full details
TRA4980X Housings, diff (ring side/ non-ring side) (1 each)/ pinion collar (1)
This is the Data Link Telemetry Expander from Traxxas that connects #6550X Telemetry Expander 2.0 to the #3485 VXL-6s or #3496 VXL-8s ESC. Incl...
View full details
This is a replacement Traxxas 4-Tec 2.0 Camber and Toe Link Set. Features:Factory Replacement Part Includes:(6) Camber and Toe Links
TRA5281 Control box battery cover w/ belt clip (EZ-Start 2)
Bumper Mounts,FR & R:EMX,TMX,2.5,3.3 This is the Stock Replacement Bumber Mount Set for the Traxxas T/E Maxx trucks.These mounts attach the bum...
View full details
This is the replacement Differential Gasket/ X-Rings for the Traxxas E-Revo VXL Brushless. Includes: Differential Gasket X-Rings (2) 12.2x18x0.5 M...
View full details
This is the optional 13 Tooth Pinion Gear for the Traxxas X-Maxx.FEATURES:Hardened steel constructionReplaces stock 6491X 18T pinion gearCompatible...
View full details
This is a replacement Traxxas TRX-4 Rear Inner Portal Drive Housing Set. Features: Factory Replacement Part Nylon Construction Includes:(2) Rear...
View full details
This is the Rear Differential Housing for the Traxxas 4-Tec 2.0 chassis and Ford GT. Includes: (1) Rear Differential Housing
Traxxas optional 45T spur gear is constructed of black nylon. INCLUDES: One 45T spur gear. This is listed in the manual as the 1st gear.
This is the Replacement Differential Output Yokes for the Jato by Traxxas. Features: Nylon construction Black in color Includes: (2) Diffe...
View full details
Differential output yokes, heavy duty (2)/ screw pin (2) Pair of heavy-duty differential output yokes with screw pins (2)
This is a replacement Traxxas TRX-4 Front/Rear Outer Portal Drive Housing Set. Features: Factory Replacement Part Nylon Construction Includes:(2)...
View full details
These are the GTR shock shafts for use on the Traxxas 1/16 E-Revo and Slash VXL vehicles.Features: Aluminum construction that is silver in colorInc...
View full details
This is the Traxxas left and right tail light housing, lens and decals set.Includes: Two tail light housing Two lens Left and right decals
This is a Traxxas Inner and Outer Bearing Retainer Set. Includes:2x Inner Bearing Retainers2x Outer Bearing Retainers
Ball bearings, black rubber sealed (4x10x4mm) (2) Pair of 4x10x4 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal b...
View full details
This is a replacement Traxxas TRX-4 Receiver Box Seal Kit, including a small tube of silicone grease.
This is a replacement Traxxas Maxx Differential Carrier Case. This set also includes one x-ring gasket, two o-rings, and one 10.5x19.5x0.5 washer. ...
View full details
These are the optional orange rate GTR shock springs for use on the Traxxas 1/16 E-Revo VXL 4WD RTR.Features: Steel construction that’s red in col...
View full details
TRA7666 Spring, shock (red) (GTR) (0.314 rate)(1 pair)
This is optional Heavy Duty Rod Ends from Traxxas. Features: Heavy duty plastic construction Black in color Includes: (8) Rod Ends Spec...
View full details
This is the 44-Tooth Transmission Output Gear from Traxxas. Includes: (1) Output Gear Specs: 44 Tooth
Traxxas tie-rods and upper camber rods are constructed of steel. Includes: Four Turnbuckles Two Draglinks. These turnbuckles are used on the steeri...
View full details
This is a replacement Traxxas Front & Rear Steel Bulkhead Tie Bar Set, and is intended for use with the Traxxas 1/16 Grave Digger Monster Jam R...
View full details
This is a replacement Traxxas GTR Shock Spring Set, and is intended for use with the Traxxas 1/16 Rally.
This is the 2nd Gear for the 2-speed for the Nitro 4-Tec.FEATURES:Black nylon colorINCLUDES:One gear 37 Teeth
Manufacturer Description This is the Replacement Carrier Drive Dog for Traxxas E-Maxx Truck.This part is located in the gearbox in between the two ...
View full details
TRA4919 Servo mounts, throttle/ brake (1) (black)
This is a replacement Traxxas Receiver Cover, and is intended for use with the Traxxas Nitro Sport 1/10 Scale Nitro Truck.
Traxxas Cush Drive Housing. Package includes one front half and one rear half. Features:Nylon Construction Includes:(1) Front Half(1) Rear Half
These are the body clips for the Traxxas E-Maxx and T-Maxx trucks.Features: Steel construction Natural polished color Includes: Twelve Body Clips...
View full details
Gear, 23-T pinion (48-pitch) (fits 3mm shaft)/ set screw 23-tooth pinion gear (48-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pi...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 4pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS