TRA6832G Traxxas Aluminum Caster Block Set (2) (Green)
TRAXXAS
This is a pair of Traxxas Aluminum Left/Right Caster Blocks (C-Hubs) in Green. Fits the following models:Ford Fiesta ST RallySlash 4X4 PlatinumSla...
View full details
This is a pair of Traxxas Aluminum Left/Right Caster Blocks (C-Hubs) in Green. Fits the following models:Ford Fiesta ST RallySlash 4X4 PlatinumSla...
View full details
FEATURESOutside U-joint is lubricated and sealed by a rubber boot toprotect it from dirt and grimeU-joint pins are held captive by the ball bearing...
View full details
Slash® 2WD Low-CG (Low Center of Gravity) Conversion Kit #5830 Everything to convert your Slash 2WD The Low-CG Conversion Kit lowers your Slash’...
View full details
This is the Crankshaft w/IPS for the Traxxas 3.3racing engine with starter, TRAG5407.FEATURES:Steel ConstructionIPS (Integrated Pilot Shaft)INCLUDE...
View full details
Traxxas center differential kit for use on the Slayer. From the factory, the differentials are filled with 30K weight silicone diff fluid. This is ...
View full details
This is an optional Traxxas Center Differential Kit, and is intended for use with the Traxxas E-Revo and E-Maxx trucks. The Traxxas center differen...
View full details
This is the replacement Chassis Rails for the Traxxas TRX-6. Features: Steel Includes: (1) Left Rail (1) Right Rail Specs: 590mm
Tires & wheels, assembled, glued (SCT Split-Spoke black, satin chrome beadlock style wheels, paddle tires, foam inserts) (2) (4WD f/r, 2WD rea...
View full details
Take your adventure to a new level with this Expedition Rack for your Traxxas TRX-4 Sport. Load up this rack with all your tools and equipment fo...
View full details
This is a pair of Traxxas GTR Assembled XX-Long Shocks (Without Springs) in Green for the Slash 4x4 Ultimate. These shocks feature PTFE-coated bodi...
View full details
Shocks, GTR xx-long blue-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2) 1/10 scale XX-long GTR shocks represe...
View full details
This is the Traxxas GTR Hard Anodized XX-Long Shocks with Titanium Shafts.Features: Black colored TiN coated shafts Bodies made of alumnum Includ...
View full details
Traxxas Complete GTR Long Shocks feature hard anodized PTFE coated bodies with TiN shafts. These shocks are fully assembled and ready for oil, and ...
View full details
This is a pair of Fully Assembled (without springs) Long Green-Anodized GTR Shocks from Traxxas. Features: Hard Anodized PTFE Aluminum Bodies T...
View full details
Traxxas TRA5853X 17mm wheels hubs set is constructed of anodized blue aluminum.This is the new Traxxas 17mm wheel hub kit for the Traxxas Slash, St...
View full details
Wheel hubs, splined, 17mm, short (blue-anodized) (4)/ wheel nuts, splined, 17mm (blue-anodized) (4)/ hub retainer M4 X 0.7 (4)/ axle pin (4) (Slas...
View full details
The Traxxas TRX-4 Pre-Mounted Canyon Trail 1.9" Crawler Tires w/Sport Wheels. The 1.9 Canyon Trail S1 compound tires and tuned foam inserts are sup...
View full details
This is a pair of Traxxas Maxx tires and wheels.Features: Fits the 1/10 scale Traxxas E-Maxx, T-Maxx and Revo Wheels constructed of plastic, split...
View full details
The Traxxas Slash 4x4 Pro-Built Rear Differential is a prebuilt replacement for Slash 4X4 Short Course Trucks. Traxxas Pro-Built parts allow you to...
View full details
Traxxas optional aluminum engine mount for the Traxxas Nitro T-Maxx. This is located on the chassis and supports the engine. This mount fits both t...
View full details
Features: Anodized Blue in Color 6061 T6 Aluminum Construction Countersunk Screw Holes Includes: One Blue Aluminum Chassis
The Traxxas Slash 4x4 Pro-Built Front Differential is a pre-built replacement for Slash 4x4 Short Course trucks. Traxxas Pro-Built parts allow you ...
View full details
TRA5192X 2-SPD UPGRADE SPORTMAXX (right side of C)
Carburetor, Pro (complete, assembled for TRX Pro.15) (6.0mm bore) combine with cooling head (4032) to upgrade TRX .15 to Pro .15 performance. Repl...
View full details
This is an optional Front Heavy Duty Axle Shaft (Left and Right) and requires the TRA8064 Front Portal Drive Input Gear (sold separately). Featur...
View full details
These are optional Left and Right 30 Degree Caster Blocksfor the Traxxas Jato.FEATURES:Silver Titanium-anodized 6061-t6 aluminum30-degreeINCLUDES:O...
View full details
Traxxas changed the game with Telemetry allowing you to monitor and record real-time data from your vehicle. By combining the water-sealed Telemetr...
View full details
These are the optional Front Caster Blocks for the Traxxas Jato.These are located on the front suspension assembly.FEATURES:Titanium-anodized alumi...
View full details
TRA9513X Traxxas Body support (assembled with front mount & rear latch)/
Steering bellcranks, drag link (blue-anodized 6061-T6 aluminum)/ 5x8mm ball bearings (4)/ hardware (assembled) Enhance steering precision, strengt...
View full details
This is a replacement Traxxas 1/16 Steel Center Drive Shaft Set, and is intended for use with the Traxxas 1/16 scale family of 4WD vehicles. These ...
View full details
Traxxas’ new aluminum turnbuckles make it possible for R/C hobbyists to dress up their Jato™ and save weight at the same time! These turnbuckles co...
View full details
This is a replacement Traxxas Aluminum Rear Axle Carrier Set, and is intended for use with the Traxxas X0-1.
This is the Front and Rear Ball Bearing set for the Traxxas 2.5 nitro engine.FEATURES:Steel ConstructionINCLUDES:One Front BearingOne Rear BearingS...
View full details
Big Bore shocks (x-long) (hard-anodized and PTFE-coated T6 aluminum) (assembled with TiN shafts) w/o springs (2)
Big Bore shocks (short) (hard-anodized & PTFE-coated T6 aluminum) (assembled with TiN shafts w/ springs)(f/r)(2) (Note: Assembled with 32mm sha...
View full details
TRA9523R Traxxas Chassis brace (T-Bar), 6061-T6 aluminum (red-anodized)/
TRA9523X Traxxas Chassis brace (T-Bar), 6061-T6 aluminum (blue-anodized)/
TRA9523T Traxxas Center brace (T-Bar), 6061-T6 aluminum (orange-anodized)
TRA9523G Traxxas Center brace (T-Bar), 6061-T6 aluminum (green-anodized)/
TRA9523 Traxxas Center brace (T-Bar), 6061-T6 aluminum (black-anodized)/
Traxxas optional toe links for use on the 1/16 Slash Vehicles. Constructed of anodized red aluminum. Traxxas aluminum toe links are manufactured fr...
View full details
This is the Traxxas pair of Assembled GTR Shocks without Springs for the Traxxas Revo.Features: Aluminum shock bodies Fully assembled For the Trax...
View full details
TRA9596 Traxxas Sway bar set, Sledge (includes 1 each of all 6 sway bars)
TRA9497X Traxxas LED lights, tail lights (red)/ tailgate trim (blk chrme)
We invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 4pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS