Differential output yokes, black (2)/ 3x5mm countersunk screws (2)/ screw pin (2) Black differential output yokes (2) with 3x5 mm screws (2) and s...
View full details
Differential gear (45-tooth)/ side cover plate & screws Replacement part for these models: Nitro Rustler® Nitro Slash
O-ring and seal set, carburetor/ O-rings: 2x1mm (3), 10x1mm (4), 2.5x1.15mm (2), 6.2x1.2mm (1)/ 5x.9mm O-ring installation tool/ 5.3x7.8x.6mm crus...
View full details
Rod Ends, short (6)/ hollow balls (6) Set of six short rod ends with hollow ball connectors Replacement part for these models: 4-Tec® 2.0 AWD Ch...
View full details
This is a replacement Traxxas E-Revo 2.0 Driveshaft Rebuild Kit. This kit includes two barrels and two pins, enough parts to service two driveshaft...
View full details
Features:Steel constructionFastens lower rear suspension arms to chassis Includes:Two 4x85mm Suspension Pins Specifications:Diameter: 0.16" (4mm)Le...
View full details
This is a 2 pack of Traxxas 5x11x4mm blue rubber sealed ball bearings for the Revo. Rubber-sealed ball bearings provide smooth, long-lasting and pr...
View full details
This is a replacement Traxxas Rear Differential Housing, and is intended for use with the Traxxas Slash 4x4 short course truck. Features: Nylon Co...
View full details
This is a replacement Traxxas 20 Tooth X-Maxx Transmission Input Gear. One 2.5x12mm pin is also included. Features: 20T Replacement Part Include...
View full details
Traxxas Shock Tower Front Features: Made from black molded nylon For the Traxxas Stampede Specs: Height: 2 3/4" Thickness: 1/4" Width at base: 2...
View full details
This is the Traxxas Front/Rear Body Mount for the Slash 4x4.Features: Black colored For the Traxxas Slash 4x4 Hardened plastic construction Inclu...
View full details
Axle mount set (complete) (front & rear) (for suspension links) Axle mount set for attaching suspension links to TRX-4® front and rear axles ...
View full details
Nuts, 4mm flanged nylon locking, serrated (black) (10) Set of ten black flanged nylon locking nuts Replacement part for these models: 4-Tec® 2.0...
View full details
This is the battery compartment vent for the Traxxas E-Revo.Features: Nylon construction that is black in color Fits left or right side Includes:...
View full details
Spring, shock (GTR) (2.22 rate, black) (1 pair) 1/16 scale GTR shock springs use high-quality spring steel with a durable red powder-coated finish...
View full details
Ball bearings, blue rubber sealed (8x12x3.5mm) (2) Pair of 8x12x3.5 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime...
View full details
This is a replacement Traxxas X-Maxx Steering and Linkage Servo Horn. This steering link comes assembled pivot balls.
Traxxas Wrist Pin/Clips (2) TRX 3.3 Fits: Traxxas TRX 3.3
Steering bellcranks (L&R)/ draglink Left and right steering bellcranks with drag link
This is an optional Traxxas Single Motor Gear Cover, and is intended for use with the E-Revo model 5605. Traxxas makes it easy to convert from dual...
View full details
Ball bearings, blue rubber sealed (6x12x4mm) (2) Pair of 6x12x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out...
View full details
Gear, 16-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears) 16-tooth pinion gear (1.0 metric pitch) fi...
View full details
Traxxas Antenna Crimp Nut & Antenna Nut Tool Jato Features: Anodized Blue Aluminum crimp nut Includes: One crimping nut Nylon wrench Part...
View full details
These are the rubber sealed ball bearings for use on the Traxxas 1/16 E-Revo and Slash VXL 4WD vehicles.Features: Blue rubber sealed May also be u...
View full details
These are Traxxas 32 Pitch Hardened Steel Pinion Gears. These gears are used for various Traxxas models and feature 5mm Bore center hole, compatibl...
View full details
TRA5117A Ball bearings, black rubber sealed (6x12x4mm) (2)
TRA6715 Stampede 4X4 Body Mount (1)/ Body Mount post (2) (front) Replacement part for these models: Stampede 4X4 Unassembled Kit Stampede 4x4 VX...
View full details
Ball bearings, black rubber sealed (5x11x4mm) (2) Pair of 5x11x4 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal b...
View full details
Features:Hardened plastic constructionBlack in colorIncludes:One motor mount assembled with a 3x6mm flat head machine screwOne 3mm locknutRequires:...
View full details
Exhaust tip, rubber (7mm i.d. for N. Stampede) (1) Replacement part for these models: TRX® Pro .15 Accessory part for these models: TRX® Pro .1...
View full details
Servo horn (with built-in spring and hardware) (for Summit locking differential) Shift servo horn with built-in spring tensioner Replacement part...
View full details
Tie bar, fiberglass The fiberglass tie bar strengthens the front bulkhead and suspension arms. Requires #2640 suspension pins to complete installa...
View full details
Traxxas 7438 Linkage Steering 1/10 Rally Slash Fits: Traxxas Rally Traxxas Slash 4x4 Ultimate
Traxxas Seal Kit/Receiver Box Slash Features: Prevents moisture and dirt from entering receiver box Includes: Silicone rectangle shaped O-ring S...
View full details
This is the replacement Intermediate Differential Cover for the Traxxas TRX-6 Mercedes-Benz G 63 AMG 6X6. Includes: (1) Intermediate Differen...
View full details
Traxxas servo steering/shift mounts for the T-Maxx 3.3 are made of gray plastic construction. Includes: Two mounts Specs:Length: 1-1/2" (38mm)Widt...
View full details
This is a pack of two replacement Traxxas 3x47mm TRX-4 GTS Shock Shafts. Features:Factory Replacement Shock Shafts Includes:(2) 3x47mm Shock Shafts
This is a pack of two replacement Traxxas E-Revo VXL 2.0 Center Half Shafts.
Traxxas 5325R Servo Mount Throttle 4x10mm BCS (2) Revo Nitro Slayer This is the 4x10mm BCS Throttle Servo Mount from Traxxas.Features: Nylon const...
View full details
This is a set of two optional aluminum idler gear shafts from Traxxas. These idler shafts support the idler gears inside the transmission.
TRA3940 Screws, 4x4mm button-head machine, aluminum (blue) (hex drive) (6)
Traxxas 7569 LaTrax Rally Wheel Hubs Hex (Disc Brake Rotors) (4)These are the Wheel Hubs for the Latrax Rally Car from Traxxas.FEATURESFor front an...
View full details
This is the Traxxas 4-Tec 2.0 Front Differential Housing. This diff housing fits all 4-Tec 2.0 cars, including the Ford GT and Mustang GT.Stock Rep...
View full details
This is the Receiver Box Seal Kit for the Traxxas X-Maxx Monster Truck. Features: Replaces damaged or missing receiver box seal and cushions Si...
View full details
This is the front and rear differential housing for the Revo from Traxxas.Features: Durable black nylon constructionIncludes: One diff housing (2 p...
View full details
This is the Traxxas E-Revo 2 Gear Cover and 3x12mm Capscrew.Stock Replacement OnE-Revo 2.0
