TRA9418 Traxxas Shock tower, rear
TRAXXAS
Traxxas Drag Slash Rear Shock Tower. Package includes replacement rear shock tower. Features: Plastic Includes: (1) Shock Tower
Traxxas Drag Slash Rear Shock Tower. Package includes replacement rear shock tower. Features: Plastic Includes: (1) Shock Tower
These are the front bumper for the Traxxas Nitro Jato Stadium Truck.Features: Nylon construction that is black in colorIncludes: One Front Bumper
This is a set of four Traxxas Suspension Down Stop Screws with a 2.5mm Drill Bit for the Jato. All R/C off-road racers want as much ground clearanc...
View full details
This is the Steering Bellcrank Postfor the Traxxas Nitro Jato Stadium Truck.FEATURES:Metal constructionINCLUDES:Two Bellcrank Steering Posts
FEATURES: Aluminum brake cam construction Plastic brake sleeve construction INCLUDES: One brake cam Part #5388 One plastic sleeve Part #5388 SPECS:...
View full details
This is a 10x19mm ball bearing from Traxxas. It is primarily for used in the 2-speed Spur Gear on the Traxxas T-Maxx.Features: Ball bearings reduc...
View full details
This is the Differential Pulley and Side Cover for the Traxxas Nitro 4-Tec.FEATURES:Plastic constructionBlack in colorINCLUDES:One differential pul...
View full details
This is a stock replacement part for the Traxxas Nitro Rustler (not theelectric version).Features: Steel top gear shaft with preinstalled 16 tooth ...
View full details
This is the optional Single Motor Gear Cover for theTraxxas E-Maxx 16.8V RTR, TRAD22**.FEATURES:Constructed of plasticAllows installation of a sing...
View full details
This is a replacement Traxxas Maxx Transmission 22T Input Gear, intended for use with the Maxx 1/10 Brushless 4WD Monster Truck. This pack includes...
View full details
Suspension pins, inner, front or rear, 4x67mm (hardened steel) (2) Two 4x67 mm hardened steel inner suspension pins fit front or rear Replacement...
View full details
Traxxas Captured Shock Spring Retainers. These optional spring retainers are a great upgrade to help support the shock springs found on the Traxxas...
View full details
Gear, 9-T pinion (32-p) (steel) (fits 3mm shaft)/ set screw 9-tooth pinion gear (32-pitch) fits 3 mm motor shafts and includes set screw. Traxxas ...
View full details
Guards,Steering Servo:Revo, Revo 3.3,SLY (2) These are the replacement Steering Servo Guards forthe Traxxas Nitro Revo Monster Truck. Features Nylo...
View full details
This is the shim set for the Traxxas Nitro Jato Stadium Truck.Features: Metal construction that’s silver in color adjusting roll centerIncludes: Fo...
View full details
Gear, 15-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears) 15-tooth pinion gear (1.0 metric pitch) fits...
View full details
Spring pre-load spacers: 1mm (4)/ 2mm (2)/ 4mm (2)/ 8mm (2) Change the ride height on your vehicle with these spring pre-load spacers for Traxxas ...
View full details
TRA3925 Seal kit, receiver box (includes o-ring, seals, and silicone grease)
Rod ends, long (6)/ hollow ball connectors (6) Set of six long rod ends with hollow ball connectors Replacement part for these models: Bandit® B...
View full details
This is a set of eight Traxxas 5mm Black Serrated Steel Flanged Nylon Locking Nuts for the Unlimited Desert Racer. Features: Made of steelSerrated...
View full details
Rebuild kit, steel constant-velocity driveshaft (includes pins for 2 driveshaft assemblies (for use only with #7750X driveshaft) Rebuild kit for u...
View full details
Cover, gear/ motor mount hinge post/ 3x10mm CS with split and flat washers (1)/ 3x8mm BCS (1) Replacement gear cover with motor mount hinge post a...
View full details
Ball bearings, black rubber sealed (6x13x5mm) (2) Pair of 6x13x5 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal b...
View full details
This is the steering arm mount for the Traxxas Revo.Features: Black plastic construction Standard and maximum throw steering stops Includes: Stee...
View full details
Screw pins, 4x13mm (with threadlock) (4) Set of four 4x13 mm screw pins with hex-drive heads and threadlock Replacement part for these models: R...
View full details
Ball bearing, black rubber sealed (6x16x5mm) (2) Pair of 6x16x5 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal b...
View full details
Traxxas 30 Degree Caster Blocks Left/Right Features: Black Plastic Construction Includes: Two Blocks Caster blocks (L&R) (30-degree) Rep...
View full details
Nerf bars, chassis (black) Pair of black chassis nerf bars Replacement part for these models: Drag Slash 1967 Chevrolet® C10 Truck Drag Slash Fo...
View full details
Ball bearings, blue rubber sealed (4x7x2.5mm) (2) Upgrade your standard plastic bellcrank bushings with these 4x7x2.5 mm blue-seal bearings for ...
View full details
This is a replacement Fixed Gear Shaft/ Driveshaft Adapter intended for the Traxxas Maxx Truck. This requires Traxxas parts: TRA8950X and TRA8984. ...
View full details
Gear set (for 2080 waterproof micro servo) Replacement gear set for standard 2080 micro servo. Does not fit 2080A or 2080X servos.
This is a replacement set of two Traxxas Maxx Gear Covers, intended for use with the Maxx 1/10 Brushless Monster Truck.
This is the Traxxas Body mounts, front & rear. This is Traxxas part number 7215Part Number: 7215 / TRA7215Fits1/16 SummitMore detail coming soo...
View full details
Gear, 11-T pinion (32-p) (steel) (fits 3mm shaft)/ set screw 11-tooth pinion gear (32-pitch) fits 3 mm motor shafts and includes set screw. Traxxa...
View full details
aving spare hardware is a smart choice, this is a replacement LaTrax Rally Screw Set. This set includes the necessary replacement hardware for the ...
View full details
Housings, differential, front Front differential housing halves Replacement part for these models: Ford Fiesta® ST Rally Ford® F-150® Raptor R™ ...
View full details
Traxxas pair of shock springs for the 1/16 Summit with a blue spring rate. Spring,shock(GTR) for 1/16 Summit. Requires: Installation onto shocks Sp...
View full details
This is a shock spring set for the Traxxas 1/16 Summit with a 3.2 rate (Purple).Features: GTR shock springs for the 1/16 Summit Steel construction...
View full details
Differential output yokes, black (2)/ 3x5mm countersunk screws (2)/ screw pin (2) Black differential output yokes (2) with 3x5 mm screws (2) and s...
View full details
Differential gear (45-tooth)/ side cover plate & screws Replacement part for these models: Nitro Rustler® Nitro Slash
O-ring and seal set, carburetor/ O-rings: 2x1mm (3), 10x1mm (4), 2.5x1.15mm (2), 6.2x1.2mm (1)/ 5x.9mm O-ring installation tool/ 5.3x7.8x.6mm crus...
View full details
Rod Ends, short (6)/ hollow balls (6) Set of six short rod ends with hollow ball connectors Replacement part for these models: 4-Tec® 2.0 AWD Ch...
View full details
This is a replacement Traxxas E-Revo 2.0 Driveshaft Rebuild Kit. This kit includes two barrels and two pins, enough parts to service two driveshaft...
View full details
Features:Steel constructionFastens lower rear suspension arms to chassis Includes:Two 4x85mm Suspension Pins Specifications:Diameter: 0.16" (4mm)Le...
View full details
This is a 2 pack of Traxxas 5x11x4mm blue rubber sealed ball bearings for the Revo. Rubber-sealed ball bearings provide smooth, long-lasting and pr...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 4pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS