This is a pair of 173mm molded composite plastic toe links for the Traxxas X-Maxx Monster Truck. Features: Molded composite plastic construction S...
View full details
Turnbuckles, toe link, 59mm (78mm center to center) (2) (assembled with rod ends and hollow balls) 59 mm (78 mm center to center) adjustable toe l...
View full details
Traxxas TRX-4 Front Portal Drive Input Gear. Package includes replacement drive gear, cross pin and coupler barrel. Features:Factory Replacement Pa...
View full details
TRA5316 Roll hoop, plastic/ transmission skid guard, plastic
TRA5334 Axle carriers, left & right (1 each)
TRA9218 Traxxas Door handles / trail sights / trail sight retainers (2)
Push rod (steel), heavy duty (2) (assembled with rod ends) Replacement heavy-duty steel push rods for E-Revo® VXL. Rods come assembled with rod en...
View full details
Steering link, steel/ servo saver spring, heavy duty (use with #2085X metal gear servo) The stiffer heavy-duty servo saver spring and steel stee...
View full details
Driveshaft assembly (1) left or right (fully assembled, ready to install)/ 3x10mm screw pin (1) The fully-assembled driveshaft comes complete and ...
View full details
These are the Front and Rear Body Mounts for theTraxxas Telluride 4x4 from Traxxas, TRAD91**.FEATURES:Constructed of plastic, black in colorINCLUDE...
View full details
This is a replacement LaTrax Steering Bellcrank Set. Package includes steering bellcranks, servo saver, spring, spring retainer, posts and draglink...
View full details
This is an optional Traxxas Aluminum Finned Motor Mount. Aluminum is great at dissipating heat making this mount a must have for any hot running mo...
View full details
Half Shaft Set, Long (Plastic Parts Only) (Internal Splined Half Shaft/ External Splined Half Shaft/ Rubber Boot) (Assembled w/ Glued Boot) (2 Asse...
View full details
Traxxas Slipper Pressure Plate & Hub Alloy Revo Features: Aluminum construction Includes: One slipper pressure plate One slipper hub Part C...
View full details
Ball bearings, blue rubber sealed (12x18x4mm) (2) Pair of 12x18x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime o...
View full details
Suspension arms (front) (2) Standard front suspension arms Replacement part for these models: Bandit® VXL Bandit® Drag Slash 1967 Chevrolet® C10...
View full details
This is an optional Traxxas Extended Wheelbase Rear Suspension Arm Set, and is intended for use with the Traxxas 1/16 E-Revo. Add 10mm of wheelbase...
View full details
Hollow balls, steel (machined) (22) Increase precision and extend wear with this set of twenty fully machined steel hollow balls for 1/16 models. ...
View full details
Slipper pressure plate & hub (aluminum alloy) Replacement standard-duty aluminum alloy pressure plate and hub. Use with 5552X standard-duty cl...
View full details
This is an optional Traxxas GT-Maxx Shock Springs, intended for use with the Maxx 1/10 Monster Truck. These springs have a 1.725 rate and a natural...
View full details
These are the short half shafts for use on the Traxxas Summit Truck RTR.Features: Plastic construction that’s black in colorIncludes: Two Short Hal...
View full details
This is a replacement Traxxas X-Maxx 13 Tooth Front Differential Pinion Gear. Features:Factory Replacement Part Includes:(1) Front Differential Pin...
View full details
Bottle, fuel filler (500cc) The fuel bottle holds 500 cc of fuel and includes a long, bent, blue-anodized spout for easy filling. A rubber cap and...
View full details
Traxxas replacement right side electronics box for the Revo. Part attaches directly to the chassis. Black plastic. INCLUDED: One right electronics ...
View full details
Pinion gear, differential, 11-tooth (rear) (heavy duty) (use with #7792 35-tooth differential ring gear) Heavy-duty 11-tooth rear differential pin...
View full details
Body mounts & posts, front & rear (complete set) Front and rear body posts and mounts. Includes screws. Replacement part for these models...
View full details
Differential output yoke assembly, extreme heavy duty (2) (left or right, front or rear) (assembled with external-splined half shaft)/ screw pin (...
View full details
This is the throttle & brake linkage set for the REVO from Traxxas.Includes: Throttle & brake linkage rods Springs Thumb nut Various other...
View full details
TRA9586 Traxxas Differential output cup, center (hardened steel)/ 2.5x12
TRA9554 Traxxas Stub axle, rear (for use only with #9557 rear driveshaft)
Traxxas Maxx Front/Rear Skidplate Set. Package includes replacement front and rear skidplates. Replacement part for these models: Maxx®
This is the Driveshaft Assembly for the Traxxas 1/16 Slash 4WD. Features: Nylon construction Black in color Fits left or right Includes: (...
View full details
Ball Bearing, black rubber sealed (17x26x5) (2) Pair of 17x26x5 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal be...
View full details
Skidplates, front & rear (black) Black front and rear skid plates Replacement part for these models: Ford® F-150 Raptor Ford® F-150® Raptor ...
View full details
Heat sink, Velineon® 380 brushless motor, aluminum (blue-anodized) Add the blue-anodized aluminum heat sink to your Velineon 380 brushless motor t...
View full details
This is a replacement Traxxas Maxx Center Skidplate, intended for use with the Maxx 1/10 Brushless Monster Truck.
Suspension pin set, front or rear corner (hardened steel), 4x85mm (1), 4x47mm (3), 4x33mm (2) (qty 4, #7740 required for complete set) Hardened ste...
View full details
Traxxas Drag Slash Magnum 272R Gearbox Halves. Package includes replacement gearbox halves. Features: Plastic Includes: (1) Gearbox Halves
Fender flares, front & rear (2 each) (fits #8011 or #8211 series bodies) Front and rear fender flares for the TRX-4® 8011-series Land Rover® ...
View full details
This is a set of 2 Traxxas 15x24x5mm Rubber Sealed Ball Bearings in Black.Features: Steel construction with black rubber seals Used as the outer b...
View full details
This is a set of eight Traxxas Heavy Duty Toe Link Rod Ends with pre-installed hollow balls ready for installation on the E-Revo VXL Brushless.
Gear set, differential, metal (output gears (2)/ spider gears (4)/ ring gear, 35T (1)/ 2x14.8mm pin (1)) Replace the standard plastic gears in you...
View full details
This is the Traxxas Gearbox housing/ motor plate.. This is Traxxas part number 7590XPart Number: 7590X / TRA7590XFitsLaTrax SSTLaTrax Teton
TRA5102A Ball bearings, black rubber sealed (15x21x4mm) (2)
TRA9549 Traxxas Toe links, front (2) (assembled with hollow balls)
Features:Steel and aluminum constructionIncludes:Two each; Shafts and Aluminum SpacersFour Gear Pads
Clutch shoes (2)/ spring (T-Maxx/Revo/Jato/Nitro 4-Tec) Replacement part for these models: Jato® Revo® Slayer® Pro 4X4 T-Maxx® TRX® 2.5R TRX® 3.3...
View full details
Chassis top brace Replacement X-Maxx® chassis top brace Replacement part for these models: X-Maxx® Ultimate X-Maxx®
