Toe link, 5.0mm steel (front or rear) (2) Pair of steel toe links fit front or rear. Rod ends sold separately. Replacement part for these models:...
View full details
These are the optional axle carriers left and right for use on the Traxxas Revo series.Features: Nylon construction that’s black in color Allows f...
View full details
This is the Exo-Carbon finish wing for use on the Traxxas 1/16 E-Revo VXL 4WD RTR.Features: Nylon construction in an exo-carbon finishIncludes: One...
View full details
Shock tower, front (left & right halves) Front shock tower halves Replacement part for these models: X-Maxx® Ultimate X-Maxx®
This is the chassis top plate for the Traxxas Nitro Jato Stadium Truck.Features: Nylon construction that’s black in color and holds receiver and th...
View full details
Driveshaft assembly, rear, heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1) The heavy-duty rear driveshaft comes ...
View full details
Just like the Traxxas heavy-duty suspension arms, X-Maxx green roof skid plates use our toughest composite material. Whether you’re sending it at t...
View full details
TRA9559 Traxxas Boots, driveshaft (2)/ retainer (assembled) (2)
This is a replacement Traxxas Differential Gear Set, including four spider gears and two spider gear shafts. Includes:(4) Spider Gears(2) Spider Ge...
View full details
Input gear, 22-tooth/ input shaft (transmission) (heavy duty) (fits Bandit®, Rustler®, Stampede®, Slash® 2WD) The heavy-duty input shaft features...
View full details
This is a replacement Pink Front Bumper and Mount for the 2WD Traxxas Slash. Features: Nylon construction Pink in color Includes: (1) Fron...
View full details
This is a set of Traxxas Steel upper and lower Tie Bars.Features: Steel construction Mounts upper and lower bulkhead halves in place Includes: On...
View full details
Suspension arms, left & right Replacement left & right suspension arms Replacement part for these models: BIGFOOT® No. 1 Officially Li...
View full details
This is a Traxxas front and rear Skidplate.Features: Molded composite plastic construction and reduces damage to underside of chassis and other com...
View full details
This is a replacement Traxxas X-Maxx Left Lower Suspension Arm. Features: Factory Replacement Part Nylon Construction Includes:(1) Left Lower Sus...
View full details
Ring gear, differential, 35-tooth (heavy duty) (use with #7790, #7791 11-tooth differential pinion gears) Heavy-duty metal 35-tooth ring gear fits...
View full details
This is the Traxxas Red 6061-T6 Aluminum Center Driveshaft for the 1/10 Slash 4x4 vehicles. Accessory Part For1/10 Ford Fiesta ST RallySlash 4x4 Br...
View full details
Toe link, 5.0mm steel (front or rear) (2) Pair of steel 5 mm toe links fit front or rear Replacement part for these models: E-Revo® VXL Brushless
These are the Traxxas GTR XX-Long Tin-Coated Shafts for the Slash 4x4 Platinum.Features: Brass colored Tin-Coated Made of metal For the Traxxas Sl...
View full details
Traxxas Driveshaft, rear (shaft only, 5mm x 131mm) (1) (for use only with #9554 stub axle)
This is a set of Traxxas Maxx’s extreme-duty cold-weather suspension arms, available in 6 colors to allow you to customize your truck to your style...
View full details
Driveshaft assembly, front, heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1) The front heavy-duty driveshaft come...
View full details
Shock tower, rear (left & right halves) Rear shock tower halves Replacement part for these models: X-Maxx® Ultimate X-Maxx®
Spider gear shaft (2)/ spacers (4)/16x23.5x.5 stainless washer (2) (for #7781X aluminum differential carrier) Spider gear shafts (2) include space...
View full details
This is a replacement 11-tooth heavy duty front differential pinion gear for the Traxxas X-Maxx. Designed for use with 35-tooth heavy duty ring gea...
View full details
Driveshaft, center, 6061-T6 aluminum (blue-anodized) Formed from 6061-T6 aluminum, this center driveshaft is both strong and lightweight. Internal...
View full details
This is an optional Traxxas HD Cold Weather Front Suspension Arm Set, a heavy duty set of front suspension arms for for 2WD Slash, Stampede, and R...
View full details
Wheelie bar The Rustler 4X4 wheelie bar helps prevent backflips under full-throttle acceleration. Replacement part for these models: Rustler® 4X...
View full details
Shock shafts, hardened steel, titanium nitride coated (long) (2) These hardened steel shafts have a super tough titanium nitride coating with a mi...
View full details
Driveshaft, center, 6061-T6 aluminum (green-anodized) (189mm)Accessory part for these models:Rustler 4X4 VXLRustler 4X4
This is the wing mount for the Traxxas Revo 3.3.Features: Nylon construction that’s black in colorIncludes: Two Wing Supports Wing Mount Four 4mm ...
View full details
Skidplate, transmission, nylon (black)/ coverReplacement part for these models:E-Revo VXL Brushless
Servo horn (with built-in spring and hardware) (for Summit locking differential) Shift servo horn with built-in spring tensioner Replacement part...
View full details
Just like the Traxxas heavy-duty suspension arms, X-Maxx orange roof skid plates use our toughest composite material. Whether you’re sending it at ...
View full details
Traxxas 7730 X-Maxx Right Lower Suspension Arm This is a replacement Traxxas X-Maxx Right Lower Suspension Arm. Features: Factory Replacement Part...
View full details
This is a Traxxas Stampede Long Comp Grey Chassis, intended for use as a replacement for the Stampede kits and as an optional part for the Bigfoot....
View full details
Designed for the ExtremeNew heavy-duty X-Maxx suspension arms utilize our latest proprietary composite material for extreme durability. Traxxas des...
View full details
This is the CV style stub axle for use on the Traxxas Summit Truck RTR.Features: Machined steel construction that’s CV styleIncludes: CV Style Stu...
View full details
Traxxas transmission gear set for use on the 1/16 E-Revo and Slash VXL Vehicles. Nylon input and output gears. Steel idler gear. This package inclu...
View full details
This is a set of Traxxas Maxx’s extreme-duty cold-weather suspension arms, available in 6 colors to allow you to customize your truck to your style...
View full details
This is a set of Traxxas Maxx’s extreme-duty cold-weather suspension arms, available in 6 colors to allow you to customize your truck to your style...
View full details
Suspension arms, (rear) (2) Standard rear suspension arms Replacement part for these models: Ford® F-150 Raptor Ford® F-150® Raptor Nitro Rustle...
View full details
Traxxas Body Accessories Kit, 2017 Ford Raptor (Includes Grill, Hood Insert, Side Mirrors, & Mounting Hardware)
This is the Traxxas left and right axle carriers for the E-Revo VXL Includes: Four dust boot retainers Note: Use with 8x16mm & 17x26mm ball bea...
View full details
Ball bearing, black rubber sealed (20x27x4mm) (2) Pair of 20x27x4 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal b...
View full details
Air filter and pre-filter inserts, foam (high-volume) (3) (pre-oiled, assembled) (use with #5266 filter body) (TRX® 2.5, 2.5R, 3.3) Pack of three ...
View full details
This is the Traxxas Telemetry Expander Mount for the Slash, Stampede 4x4, and Rally.Features: Made of durable material For the Traxxas Slash, Trax...
View full details
TRA9535 Traxxas Bumper, front/ skidplate, front/ tie bar mount, front/ 3
