Filters
Accessories
Brand
Parts Category
TRAXXAS PARTS
TRA5389X Shift fork/ shaft
TRAXXAS
This is a Shift Fork/Shaft for the Traxxas Revo.FEATURES:Plastic shift fork constructionMetal shift fork shaftShift fork plastic is black in colorP...
View full detailsTRA5388 Brake cam (1)/ sleeve (1)
TRAXXAS
FEATURES: Aluminum brake cam construction Plastic brake sleeve construction INCLUDES: One brake cam Part #5388 One plastic sleeve Part #5388 SPECS:...
View full detailsTRA5377 Gear, idler/ idler gear support/ bearing (pressed in)
TRAXXAS
Traxxas idler gear with bearing and support for the Revo. These parts install inside the transmission. Steel idler gear construction Plastic idler ...
View full detailsTRA5355X Hollow ball set, aluminum (30)/ tall centered hollow ball (2)/ tall offset hollow ball (2)/ bump steer adjustment shims; 3.5mm (2), 1.17mm (2)
TRAXXAS
Traxxas package of thirty aluminum hollow balls for the Revo.Constructed of gun metal gray colored aluminum.Two tall offset aluminum hollow balls a...
View full detailsTRA5339 Insert, threaded steel (replacement inserts for Tubes) (includes (1) left and (1) right threaded insert)
TRAXXAS
TRA5339 Insert, threaded steel (replacement inserts for Tubes) (includes (1) left and (1) right threaded insert)
TRA5328 Suspension arms, adjustable wheelbase left side (upper arm (1)/ lower arm (1))
TRAXXAS
FEATURES: Black nylon construction INCLUDES: One upper rear and one lower rear suspension arm REQUIRES: Removing stock suspension arms Adjusting ca...
View full detailsTRA5327 Suspension arms, adjustable wheelbase right side (upper arm (1)/ lower arm (1))
TRAXXAS
Suspension Arms, Right: Revo, Revo 3.3 This is the Upper and Lower Right Suspension Arm Set used in theRevo Adjustable Suspension Arm Set, TRAC534...
View full detailsTRA5323R Bulkhead tie bars, front & rear (red-anodized aluminum)
TRAXXAS
These are the front and rear red aluminum bulkhead tie bars for the Revo from Traxxas.Features: Blue anodized aluminum (2.5mm thick)Includes: One f...
View full detailsTRA5296 Fitting, inlet for pipe pressure (90-degree)(1)
TRAXXAS
Traxxas 90º pressure fitting is constructed of polished aluminum and threaded at one end. This is the pressure fitting that is used on the Tuned Pi...
View full detailsTRA5169 Screws, 2.6x8mm countersunk machine (6)
TRAXXAS
This is a package of flat head countersunk machine screws from Traxxas.Features: Silver metal construction Flat head Phillips drive Includes: Six...
View full detailsTRA5146 Hanger, metal (T-Maxx/S-Maxx) (TRX 2.5, 2.5R)
TRAXXAS
TRA5146 Hanger, metal (T-Maxx/S-Maxx) (TRX 2.5, 2.5R)
TRA5141A Toe links, Maxx (Tubes black-anodized, 7075-T6 aluminum) (112mm, front) (2)
TRAXXAS
These are the optional lightweight 112mm toe links with rod ends for the Traxxas Maxx models.Features: 30% lighter than stock steel toe links 4 ti...
View full detailsTRA5133A Spacer, pushrod (aluminum, blue) (use with 5318 or 5318X pushrod and 5358 progressive 2 rockers) (8)
TRAXXAS
TRA5127 Stub axle (1) (Jato) (for steel constant-velocity driveshaft)
TRAXXAS
TRA5127 Stub axle (1) (Jato) (for steel constant-velocity driveshaft)
TRA4998 Output gear assembly, reverse (26-T)
TRAXXAS
This is the 26 tooth Reverse Output Gear Assembly for the Traxxas T-Maxx4WD Radio Control Monster Truck.This reverse output gear installs on the ou...
View full detailsTRA4997 Output gear assembly, forward (26-T)
TRAXXAS
Traxxas Output Gear Assembly Forward Features: Replaces stock forward output gear. Constructed of plastic. Includes: One 26 tooth forward output...
View full detailsTRA4993 Gear shaft, primary(1)
TRAXXAS
Traxxas Gear Shaft Primary Features: Replaces stock gear shaft. Constructed of steel. Includes: One gear shaft Part Compatibility: Traxxas S-...
View full detailsTRA4992 Drive gear, two-speed (17/22-teeth)/ slipper shaft
TRAXXAS
FEATURES: Replaces damaged or worn 2-speed drive gearsGears are constructed of plastic and pre-installed on steel shaft INCLUDES: One 17 and 22 too...
View full detailsTRA4988 Drive hub assembly, clutch/ 6x8.5x0.5mm PTFE-coated washer (1)
TRAXXAS
This is the Replacement Drive Hub Assembly for the Traxxas T-Maxx 4WD Radio Control Monster Truck.This drive hub assembly fits into the spur gear a...
View full detailsTRA4987 Rings, retainer (snap rings) (14mm) (2)
TRAXXAS
This is the Replacement Pair of 14mm Snap Rings for the Gear Hub Assembly on the Traxxas T-Maxx 4WD Radio Control Monster Truck. These are extra sn...
View full detailsTRA4986 Gear hub assembly, 1st/ one-way bearing/ snap ring
TRAXXAS
Traxxas replacement gear hub assembly for the T-Maxx 4WD Radion Control Monster Truck. This is the replacement gear hub assembly. This gear hub ass...
View full detailsTRA4984 Spur gear, 43-T (1st speed)
TRAXXAS
This is the Replacement 43 Tooth 1st Speed Spur Gear for the Traxxas T-Maxx4WD Radio Control Monster Truck.This spur gear is installed in the trans...
View full detailsTRA4973 Tires, Maxx 3.8" (6.3" outer diameter (160mm)) (2)
TRAXXAS
Features: Fits all Traxxas vehicles in the Revo and Maxx seriesIncludes: Two 3.8 Tires and foam insertsRequires: Installing on wheels with Tire Glu...
View full detailsTRA4971 Foam inserts, tire (2)
TRAXXAS
This is the set of Foam Inserts for Traxxas T-Maxx 4WD RTR Monster Truck.These foam inserts fit inside each wheel adding firmness andkeeping the ti...
View full detailsTRA4970 Tires, 3.2" Maxx series (2)
TRAXXAS
This is the set of tires for the Traxxas T-Maxx 4WD monster truck. These tires fit on the wheels of the T-Maxx.Features: Replaces damaged or worn ...
View full detailsTRA4968 Wires: brake, throttle, shift/ servo horns: throttle, brake & shift;ball screw and ball cup (shift shaft)
TRAXXAS
Traxxas throttle brake linkage for the T-Maxx is an assortment of linkage wires for the Traxxas T-Maxx. These wires connect the servos to the engin...
View full detailsTRA4934X Aluminum caps, pivot ball (blue-anodized) (4)
TRAXXAS
Replaces stock silver pivot ball aluminum caps. Constructed of blue aluminum.
TRA4934 Aluminum caps, pivot ball (4)
TRAXXAS
Traxxas 4934 Aluminum Caps Pivot Balls (4pcs) T-Maxx These are the Pivot Ball Aluminum Caps for the Traxxas T-Maxx4WD Radio Control Monster Truck....
View full detailsTRA4923X Chassis braces, lower machined 6061-T6 aluminum (blue) (2)/ hardware
TRAXXAS
This is a pair of Traxxas Machined Aluminum Lower Chassis Braces in Blue with Hardware for the T-Maxx. These aluminum lower braces provide the ulti...
View full detailsTRA4922X Chassis, 7075-T6 billet machined aluminum (4mm) (blue)/hardware
TRAXXAS
TRA4922X Chassis, 7075-T6 billet machined aluminum (4mm) (blue)/hardware
TRA4919X Servo mounts, throttle/ brake (machined aluminum) (blue) (f&r)
TRAXXAS
TRA4919X Servo mounts, throttle/ brake (machined aluminum) (blue) (f&r)
TRA4919A Servo mounts, throttle/brake (1) (grey)
TRAXXAS
Traxxas throttle and brake servo mounts for the T-Maxx 3.3 is constructed of gray plastic. Includes: Two servo mounts Specs:Length: 1-3/8" (36mm)Wi...
View full details