TRA6839X Shock tower, front, 7075-T6 aluminum (blue-anodized)
TRAXXAS
This is the optional aluminum front shock tower for the Traxxas Slash 4x4.Features: 7075-T6 blue anodized aluminum constructionIncludes: Aluminum F...
View full details
This is the optional aluminum front shock tower for the Traxxas Slash 4x4.Features: 7075-T6 blue anodized aluminum constructionIncludes: Aluminum F...
View full details
TRA6838X Shock tower, rear, 7075-T6 aluminum (blue-anodized) Optional Aluminum Rear Shock Tower for the Traxxas Slash 4x4 FEATURES: 7075-T6 blue an...
View full details
This is an optional Traxxas Aluminum Rustler 4X4 Rear Shock Tower, intended for use with the Rustler 4X4 and 4X4 VXL models. These 7075-T6 alumin...
View full details
Features: Metal Construction, installs in gearbox behind the primary clutch assembly Black in color  Includes: (1) Metal Primary Shaft (1) O...
View full details
Traxxas package of thirty aluminum hollow balls for the Revo.Constructed of gun metal gray colored aluminum.Two tall offset aluminum hollow balls a...
View full details
FEATURES: One way hub and E-Ring INCLUDES: One way Hub E-ring
This is an optional Traxxas Rustler 4x4 and Slash 4x4 LCG Chassis Red Brace Kit. This heavy-duty chassis brace fits Slash 4X4 models equipped with...
View full details
Replacement part for these models: Revo Accessory part for these models: Revo Summit Lightweight Aluminum Turnbuckles 30% lighter than steel, ...
View full details
Traxxas optional center differential kit for use on the 1/16 E-Revo and Slash Vehicles. Constructed of black nylon. The optional center differentia...
View full details
The Traxxas Maxx Hardened Steel Suspension Pin Set is an optional upgrade that will improve the durability of the Traxxas Maxx Monster Truck. These...
View full details
Heavy-Duty Chassis Brace Designed for the Extreme The heavy-duty chassis brace fits Slash 4X4 models equipped with the low-CG chassis and all R...
View full details
TRA9539R Traxxas Shock tower, front, 6061-T6 aluminum (red-anodized)
Cooling fan, Velineon¶© VXL-3s ESC The Velineon¶© VXL-3s Accessory Cooling Fan reduces ESC temperatures during extended operation for maximum powe...
View full details
TRA9539 Traxxas Shock tower, front, 6061-T6 aluminum (blue-anodized)
The Traxxas TRX-4 Chassis Conversion Kit will allow you to convert your TRX-4 Defender and Tactical long wheelbase models, to the short wheelbase u...
View full details
This is an optional upgrade Traxxas TRX-4 Motor Plate in Anodized Aluminum. Features: High Strength Aluminum Construction Anodized Finish Availa...
View full details
Replacement part for these models: Maxx¶© TRA3463 Traxxas Cooling fan kit (with shroud), Velineon 540XL motor
This is the Traxxas Blue Wheelie Bar. Set your truck apart from the crowd with a wheelie bar that matches your custom color scheme! Accessory Pa...
View full details
Traxxas TRX Pro.15 to TRX 2.5/2.5R upgrade kit for Nitro Rustler, Nitro Sport (incl. SE), and Nitro Stampede
TRA9539T Traxxas Shock tower, front, 6061-T6 aluminum (orange-anodized)
TRA9539G Traxxas Shock tower, front, 6061-T6 aluminum (green-anodized)
TRA9539A Traxxas Shock tower, front, 6061-T6 aluminum (gray-anodized)
This is an optional upgrade Traxxas TRX-4 Motor Plate in Anodized Aluminum. Features: High Strength Aluminum Construction Anodized Finish Availa...
View full details
This is a replacement Traxxas Center Differential Output Gear Set. These hardened steel gears are for use in the center differential only. Feature...
View full details
This is a Traxxas Link Set with 5x117mm Steering Link, 5x60mm Draglink, and a 5x63mm Panhard Link for the TRX-4 Scale and Trail Crawler. These li...
View full details
Traxxas Pro .15 to TRX 2.5 engine conversion has a tune Pipe, bellcrank, & Throttle Servo Horn made of plastic. Linkage wire made of steel. Spe...
View full details
This is a pack of two replacement Traxxas E-Revo VXL 2.0 Differential Output Gears. These diff output gears are made from hardened steel. Features:...
View full details
Traxxas Motor mount, aluminum (upper and lower)/ motor mount spacer/ hardware
This left and right 1972 Chevrolet Blazer side trim with upper and lower rear trim, left, right, and rear retainers, 23 2.6x8 BCS, and five self-ta...
View full details
TRA8860 Traxxas Spool shaft assembly, winch
This is a pack of four optional Traxxas Anodized Aluminum Wheel Hub Hexes intended for the Maxx Truck. This package also includes four 4x13mm scr...
View full details
This is a pack of four optional Traxxas Anodized Aluminum Wheel Hub Hexes intended for the Maxx Truck. This package also includes four 4x13mm scr...
View full details
Clutch bell, hardened steel (20-tooth) (32-pitch) (N. Hawk/Buggy/Street) ¶ÿ Accessory part for these models: TRX Pro .15
This is the complete differential assembly for use on the Traxxas 1/16 E-Revo and Slash VXL vehicles. Not for use on 1/10 scale vehicles.Features: ...
View full details
Traxxas Chassis (fits Maxx V2 with extended chassis (352mm wheelbase))
Traxxas Toe Links Slayer Features: 7075-T6 aluminum construction Fits front or rear Anodized Red Includes: Two Toe Links Eight Ball Ends One 7mm...
View full details
These are the optional tubes lightweight aluminum turnbuckles for the Traxxas T-Maxx.Features: 30% lighter than stock steel toe links 4 times stif...
View full details
This is a pack of four optional Traxxas Aluminum GTX Threaded Collars for the Traxxas X-Maxx. These hard anodized, PTFE-coated aluminum upper sprin...
View full details
This is set of four Traxxas X-Maxx GTX Shock PTFE-Coated Aluminum Spring Retainer Adjusters. These are threaded and mount on the shock body to allo...
View full details
These are the optional aluminum pushrods for use on the Traxxas 1/16 scale Slash vehicles.Features: Aluminum construction that’s in a anodized red ...
View full details
Roller clutch/ 6x8x0.5 TW (1) (also called one-way bearing) (TRX® 2.5, 2.5R, 3.3) Roller clutch (one-way bearing) includes 6x8x0.5 washer. Fits TR...
View full details
This is the Traxxas pair of X-Long Rear Shocks for the Traxxas Nitro Rustler. These shocks are a pre-assembled and are hard-anodized and Teflon coa...
View full details
This is the Traxxas pair of Long Shocks. One bottle of silicone shock oil is included. Features: T-6 aluminum construction Greatly reduces piston/...
View full details
This is the Traxxas set of four Anodized 17mm Splined Wheel Hubs, (4). These Splined Wheel Hubs are red colored and compatible with the Traxxas Sla...
View full details
LED rock light kit, TRX-4®/TRX-6™ (requires #8028 power supply and #8018, #8072, or #8080 inner fenders) Traxxas LED Rock Lights install directl...
View full details
This is a replacement Traxxas Center Rear Driveshaft for the Unlimited Desert Racer. Â Features: Fully assembled Made from 6061-T6 aluminum Black-...
View full details
These are the optional 17mm splined wheel hubs for the T-Maxx 3.3 4WD Nitro Monster Truck RTR.Features: Aluminum construction that’s blue anodized...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL:Â sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 10am to 3pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS