TRA6715 Stampede 4X4 Body Mount (1)/ Body Mount post (2) (front) Replacement part for these models: Stampede 4X4 Unassembled Kit Stampede 4x4 VX...
View full details
Ball bearings, black rubber sealed (5x11x4mm) (2) Pair of 5x11x4 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal b...
View full details
Features:Hardened plastic constructionBlack in colorIncludes:One motor mount assembled with a 3x6mm flat head machine screwOne 3mm locknutRequires:...
View full details
Exhaust tip, rubber (7mm i.d. for N. Stampede) (1) Replacement part for these models: TRX® Pro .15 Accessory part for these models: TRX® Pro .1...
View full details
Servo horn (with built-in spring and hardware) (for Summit locking differential) Shift servo horn with built-in spring tensioner Replacement part...
View full details
Tie bar, fiberglass The fiberglass tie bar strengthens the front bulkhead and suspension arms. Requires #2640 suspension pins to complete installa...
View full details
Traxxas 7438 Linkage Steering 1/10 Rally Slash Fits: Traxxas Rally Traxxas Slash 4x4 Ultimate
Traxxas Seal Kit/Receiver Box Slash Features: Prevents moisture and dirt from entering receiver box Includes: Silicone rectangle shaped O-ring S...
View full details
This is the replacement Intermediate Differential Cover for the Traxxas TRX-6 Mercedes-Benz G 63 AMG 6X6. Includes: (1) Intermediate Differen...
View full details
Traxxas servo steering/shift mounts for the T-Maxx 3.3 are made of gray plastic construction. Includes: Two mounts Specs:Length: 1-1/2" (38mm)Widt...
View full details
This is a pack of two replacement Traxxas 3x47mm TRX-4 GTS Shock Shafts. Features:Factory Replacement Shock Shafts Includes:(2) 3x47mm Shock Shafts
This is a pack of two replacement Traxxas E-Revo VXL 2.0 Center Half Shafts.
Traxxas 5325R Servo Mount Throttle 4x10mm BCS (2) Revo Nitro Slayer This is the 4x10mm BCS Throttle Servo Mount from Traxxas.Features: Nylon const...
View full details
This is a set of two optional aluminum idler gear shafts from Traxxas. These idler shafts support the idler gears inside the transmission.
TRA3940 Screws, 4x4mm button-head machine, aluminum (blue) (hex drive) (6)
Traxxas 7569 LaTrax Rally Wheel Hubs Hex (Disc Brake Rotors) (4)These are the Wheel Hubs for the Latrax Rally Car from Traxxas.FEATURESFor front an...
View full details
This is the Traxxas 4-Tec 2.0 Front Differential Housing. This diff housing fits all 4-Tec 2.0 cars, including the Ford GT and Mustang GT.Stock Rep...
View full details
This is the Receiver Box Seal Kit for the Traxxas X-Maxx Monster Truck. Features: Replaces damaged or missing receiver box seal and cushions Si...
View full details
This is the front and rear differential housing for the Revo from Traxxas.Features: Durable black nylon constructionIncludes: One diff housing (2 p...
View full details
This is the Traxxas E-Revo 2 Gear Cover and 3x12mm Capscrew.Stock Replacement OnE-Revo 2.0
This is the Mounts for the Traxxas RPM Sensor (Nitro Engines). Features: Plastic and metal construction Includes: (3) Different plasti...
View full details
These are the diff and trans drive yokes for the Traxxas T-Maxx 3.3.Features: Black plastic constructionIncludes: Two drive yokes Two 4x15mm Yoke ...
View full details
This is the Servo Horn with built-in spring for the TRX-6 6x6 with locking differentials by Traxxas. Includes: (1) Servo Horn (1) Spring Hardware
TRA9542 Traxxas Suspension pins, outer, front, 3.5x48.2mm (hardened steel) (2)/ M3x0.5mm NL, flanged (2)
This is the Traxxas pair of Nerf Bars for the 1/10 scale Rally VXL, (2).Features: Black colored Made of plastic For the Traxxas Rally VXL Include...
View full details
Ball bearings, black rubber sealed (7x14x5mm) (2) Pair of 7x14x5 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal b...
View full details
This is a set of replacement Traxxas GTR shock caps with spring retainers, and are intended for use with the Traxxas 1/16 Slash, and 1/16 E-Revo ve...
View full details
This is the Input Shaft/ PinFor the Traxxas Cush drive outputFEATURES:Steel constructionINCLUDES:One input shaftOne pinCOMMENTS:This part is for th...
View full details
Traxxas 5677A Cover Gear 3x8mm CS Revo (1)This is the Gear Cover for the Traxxas Revo.FEATURESPlastic construction, black in colorFor the single mo...
View full details
Traxxas Brake Cam Jato Features: Aluminum construction Silver in color Includes: One Metal Brake Cam Fits: Traxxas Nitro Jato
This is an optional Traxxas Rear Suspension Hinge Pin Mount Set. These blocks feature different anti-squat angles which will alter the suspension c...
View full details
These are the rear left and right stub axle carriers for the Traxxas Nitro Jato Stadium Truck.Features: Nylon construction that’s black in colorInc...
View full details
This is the steering drag link with screw for the Traxxas Nitro Jato Stadium Truck.Features: Nylon construction that’s black in colorIncludes: One...
View full details
FEATURES: Black plastic and steel wire construction INCLUDES: One ball link One straight linkage rod One coiled linkage rod One servo horn
This is the steering linkage for the Traxxas Revo.Features: Connects between servo horns and steering armsIncludes: Two 3x30mm steel turnbuckles, f...
View full details
Nuts, 5mm flanged nylon locking (steel, serrated) (8) Set of eight 5 mm nylon locking nuts feature a serrated flange to keep them snug on the whee...
View full details
Ball bearings, blue rubber shield (5x10x4mm) (2) Pair of 5x10x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out...
View full details
TRA4965 Brake pads (2)/ brake piston/ 3x15mm cap hex screws (2)
Traxxas throttle and brake servo mounts for the T-Maxx 3.3 is constructed of gray plastic. Includes: Two servo mounts Specs:Length: 1-3/8" (36mm)Wi...
View full details
This is the Replacement Idler Gear and Shaft for the Nitro Stampede/Rustler.This gear is located in the transmission. Features White nylon construc...
View full details
These are the 3mm x 10mm shoulder screws for the Traxxas Nitro Jato Stadium Truck.Features: Metal construction that’s black in colorIncludes: Six 3...
View full details
Traxxas Shoulder screws, 3x10mm (6) (with threadlock)
TRA9361 Traxxas Springs, shock (red) (1.029 rate) (2) Fits: Traxxas Factory Five 33 hot rod coup Traxxas Factory Five 35 hot rod truck
