This is a set of eight Traxxas 5mm Black Serrated Steel Flanged Nylon Locking Nuts for the Unlimited Desert Racer. Features: Made of steelSerrated...
View full details
Rebuild kit, steel constant-velocity driveshaft (includes pins for 2 driveshaft assemblies (for use only with #7750X driveshaft) Rebuild kit for u...
View full details
Cover, gear/ motor mount hinge post/ 3x10mm CS with split and flat washers (1)/ 3x8mm BCS (1) Replacement gear cover with motor mount hinge post a...
View full details
Ball bearings, black rubber sealed (6x13x5mm) (2) Pair of 6x13x5 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal b...
View full details
This is the steering arm mount for the Traxxas Revo.Features: Black plastic construction Standard and maximum throw steering stops Includes: Stee...
View full details
Screw pins, 4x13mm (with threadlock) (4) Set of four 4x13 mm screw pins with hex-drive heads and threadlock Replacement part for these models: R...
View full details
Ball bearings, blue rubber shield (5x8x2.5mm) (2) Pair of 5x8x2.5 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime o...
View full details
Ball bearing, black rubber sealed (6x16x5mm) (2) Pair of 6x16x5 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal b...
View full details
Traxxas 30 Degree Caster Blocks Left/Right Features: Black Plastic Construction Includes: Two Blocks Caster blocks (L&R) (30-degree) Rep...
View full details
Nerf bars, chassis (black) Pair of black chassis nerf bars Replacement part for these models: Drag Slash 1967 Chevrolet® C10 Truck Drag Slash Fo...
View full details
Ball bearings, blue rubber sealed (4x7x2.5mm) (2) Upgrade your standard plastic bellcrank bushings with these 4x7x2.5 mm blue-seal bearings for ...
View full details
This is a replacement Fixed Gear Shaft/ Driveshaft Adapter intended for the Traxxas Maxx Truck. This requires Traxxas parts: TRA8950X and TRA8984. ...
View full details
Gear set (for 2080 waterproof micro servo) Replacement gear set for standard 2080 micro servo. Does not fit 2080A or 2080X servos.
This is a replacement set of two Traxxas Maxx Gear Covers, intended for use with the Maxx 1/10 Brushless Monster Truck.
This is the Traxxas Body mounts, front & rear. This is Traxxas part number 7215Part Number: 7215 / TRA7215Fits1/16 SummitMore detail coming soo...
View full details
Gear, 11-T pinion (32-p) (steel) (fits 3mm shaft)/ set screw 11-tooth pinion gear (32-pitch) fits 3 mm motor shafts and includes set screw. Traxxa...
View full details
aving spare hardware is a smart choice, this is a replacement LaTrax Rally Screw Set. This set includes the necessary replacement hardware for the ...
View full details
Housings, differential, front Front differential housing halves Replacement part for these models: Ford Fiesta® ST Rally Ford® F-150® Raptor R™ ...
View full details
Traxxas pair of shock springs for the 1/16 Summit with a blue spring rate. Spring,shock(GTR) for 1/16 Summit. Requires: Installation onto shocks Sp...
View full details
This is a shock spring set for the Traxxas 1/16 Summit with a 3.2 rate (Purple).Features: GTR shock springs for the 1/16 Summit Steel construction...
View full details
Differential output yokes, black (2)/ 3x5mm countersunk screws (2)/ screw pin (2) Black differential output yokes (2) with 3x5 mm screws (2) and s...
View full details
Differential gear (45-tooth)/ side cover plate & screws Replacement part for these models: Nitro Rustler® Nitro Slash
O-ring and seal set, carburetor/ O-rings: 2x1mm (3), 10x1mm (4), 2.5x1.15mm (2), 6.2x1.2mm (1)/ 5x.9mm O-ring installation tool/ 5.3x7.8x.6mm crus...
View full details
Rod Ends, short (6)/ hollow balls (6) Set of six short rod ends with hollow ball connectors Replacement part for these models: 4-Tec® 2.0 AWD Ch...
View full details
This is a replacement Traxxas E-Revo 2.0 Driveshaft Rebuild Kit. This kit includes two barrels and two pins, enough parts to service two driveshaft...
View full details
Features:Steel constructionFastens lower rear suspension arms to chassis Includes:Two 4x85mm Suspension Pins Specifications:Diameter: 0.16" (4mm)Le...
View full details
This is a 2 pack of Traxxas 5x11x4mm blue rubber sealed ball bearings for the Revo. Rubber-sealed ball bearings provide smooth, long-lasting and pr...
View full details
This is a replacement Traxxas Rear Differential Housing, and is intended for use with the Traxxas Slash 4x4 short course truck. Features: Nylon Co...
View full details
This is a replacement Traxxas 20 Tooth X-Maxx Transmission Input Gear. One 2.5x12mm pin is also included. Features: 20T Replacement Part Include...
View full details
Traxxas Shock Tower Front Features: Made from black molded nylon For the Traxxas Stampede Specs: Height: 2 3/4" Thickness: 1/4" Width at base: 2...
View full details
This is the Traxxas Front/Rear Body Mount for the Slash 4x4.Features: Black colored For the Traxxas Slash 4x4 Hardened plastic construction Inclu...
View full details
Axle mount set (complete) (front & rear) (for suspension links) Axle mount set for attaching suspension links to TRX-4® front and rear axles ...
View full details
Nuts, 4mm flanged nylon locking, serrated (black) (10) Set of ten black flanged nylon locking nuts Replacement part for these models: 4-Tec® 2.0...
View full details
Traxxas Rustler 4X4 Center Driveshaft. Package includes replacement plastic center driveshaft, and one screw pin. Features: Factory Replacement Pa...
View full details
This is the battery compartment vent for the Traxxas E-Revo.Features: Nylon construction that is black in color Fits left or right side Includes:...
View full details
Spring, shock (GTR) (2.22 rate, black) (1 pair) 1/16 scale GTR shock springs use high-quality spring steel with a durable red powder-coated finish...
View full details
Ball bearings, blue rubber sealed (8x12x3.5mm) (2) Pair of 8x12x3.5 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime...
View full details
This is a replacement Traxxas X-Maxx Steering and Linkage Servo Horn. This steering link comes assembled pivot balls.
Traxxas Wrist Pin/Clips (2) TRX 3.3 Fits: Traxxas TRX 3.3
Steering bellcranks (L&R)/ draglink Left and right steering bellcranks with drag link
This is an optional Traxxas Single Motor Gear Cover, and is intended for use with the E-Revo model 5605. Traxxas makes it easy to convert from dual...
View full details
Ball bearings, blue rubber sealed (6x12x4mm) (2) Pair of 6x12x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out...
View full details
Gear, 16-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears) 16-tooth pinion gear (1.0 metric pitch) fi...
View full details
Traxxas Antenna Crimp Nut & Antenna Nut Tool Jato Features: Anodized Blue Aluminum crimp nut Includes: One crimping nut Nylon wrench Part...
View full details
These are the rubber sealed ball bearings for use on the Traxxas 1/16 E-Revo and Slash VXL 4WD vehicles.Features: Blue rubber sealed May also be u...
View full details
These are Traxxas 32 Pitch Hardened Steel Pinion Gears. These gears are used for various Traxxas models and feature 5mm Bore center hole, compatibl...
View full details
TRA5117A Ball bearings, black rubber sealed (6x12x4mm) (2)
