This is a replacement Traxxas Differential Gear Set, and is intended for use with the Traxxas 1/8 Scale Funny Car. This set includes the necessary ...
View full details
This is a set of two Traxxas Progressive Rate Rear Shock Springs, and are intended for use with the Traxxas Slash 4x4. The Slash 4X4’s fully adjust...
View full details
Roll Hoop/E-Z Start Plug Mount: Jato This is the Roll Hoop w/EZ Start Plug Mountfor the Traxxas Nitro Jato Stadium Truck. Features Nylon constructi...
View full details
FEATURES: Black nylon construction INCLUDES: One tank box REQUIRES: Nothing. This is a direct replacement part. SPECS: Length: 88mm (3.47")Width: 1...
View full details
This is a replacement Traxxas TRX-4 Transmission Gear Set.
These are the left or right half shafts for use on the Traxxas 1/16 E-Revo VXL 4WD RTR.Features: Nylon construction that’s black in colorIncludes: ...
View full details
Wing, 1/16 E-Revo (black)/ decal sheet 1/16 scale E-Revo® wing with decal sheet Replacement part for these models: 1/16 E-Revo® VXL 1/16 E-Revo®
This is the Traxxas Y-Harness, Servo and LED Light Set.Features: Black and red colored Made of durable material Includes:One Traxxas Y-Harness, S...
View full details
This is a set of two replacement stub axle carriers from Traxxas intended for the Maxx. Features: Traxxas Quality and Precision Factory Replacemen...
View full details
This is a replacement Traxxas Rear Bulkhead, and is intended for use with the Traxxas Slash 4x4 short course truck in addition to other Traxxas veh...
View full details
This is a replacement Differential part set, intended for use with the Traxxas Summit Monster Truck. Includes: Heavy Duty Differential Carrier (1)...
View full details
Traxxas pivot balls and bushings for the E-Maxx and T-Maxx for the Traxxas T-Maxx and E-Maxx 4WD Radio Control Monster Trucks. This package include...
View full details
Traxxas 32P Heavy Duty Pinion Gear. This is the optional heavy duty, hardened steel pinion. The 32 pitch HD gears are available in a variety of too...
View full details
Lightweight and great looking, these blue-anodized aluminum flange lock nuts are the perfect finishing touch for your truck. Accessory part for th...
View full details
Gear, 13-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw The heavy-duty 13-tooth (32-pitch) pinion gear is mach...
View full details
Traxxas 32P Heavy Duty Pinion Gear. This is the optional heavy duty, hardened steel pinion. The 32 pitch HD gears are available in a variety of too...
View full details
These are the front and rear center half shafts for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles.Features: Nylon construction that’s black...
View full details
Lower chassis, low CG (black) Change up the color on your low-CG-equipped 2WD Slash with this accessory lower chassis. Does not fit standard chass...
View full details
Servo horn, steering, metal/ 3x14 BCS (1) Replacement steel servo horn for TRX-4® and TRX-6® models. Replacement part for these models: TRX-4® 1...
View full details
Pinion gear, differential, 13-tooth (rear) (use with #7779 42-tooth differential ring gear) 13-tooth rear differential pinion gear. Use with 7779 4...
View full details
This is the Motor Mount Washers and Screws for the Traxxas X-Maxx. Features: Aluminum Construction Blue in Color Exact Fit Includes: (4) W...
View full details
IF NOT IN STOCK REORDER RPM73162 OR RPM73165 OR RPM73164 OR RPM73169 These are the left and right axle carriers for use on the Traxxas 1/16 ...
View full details
This is a set of replacement Traxxas front and rear body posts, and are intended for use with the Traxxas 1/16 Slash, and 1/16 E-Revo vehicles. Fea...
View full details
Hold down, battery/ hold down retainer/ battery post/ foam spacer/ angled body clip (allows for installation of taller, multi-cell batteries) The ...
View full details
Traxxas Skid Plate Front Plastic Gray Features: Attaches to and protects chassis and supports the front bulkhead Skidplate is gray in color Inclu...
View full details
TRA9581 Traxxas Carrier, differential/ differential bushing (metal)/ o-r
The Traxxas Long Chassis Front Bulkhead is a replacement intended for the Traxxas Rustler 4x4. However, it can also be used with 4x4 VXL kits equip...
View full details
Half-shafts (internal-splined (2)/external-splined (2))/ metal U-joints (4) Set of two half shafts includes internal shafts (2) and external shaft...
View full details
This is a replacement Traxxas TRX-4 Right Rear Axle Shaft.
Body reinforcement set (fits #7711 body) X-Maxx® body reinforcements provide added protection for your truck during extreme driving. These high-st...
View full details
Tailgate protector/ 3x8mm flathead screw (4) The X-Maxx tailgate protector provides additional strength for the rear lip of the body for added dur...
View full details
This is the Rear Left Axle Shaft for the Traxxas TRX-4 and TRX-6. Features: Metal Construction Includes: (1) Rear Left Axle Shaft
Traxxas 32P Heavy Duty Pinion Gear. This is the optional heavy duty, hardened steel pinion. The 32 pitch HD gears are available in a variety of too...
View full details
Input shaft, transmission (cush drive) Transmission (Cush Drive) input shaft Replacement part for these models: X-Maxx® Ultimate X-Maxx® XRT® Ul...
View full details
Traxxas Rustler 4X4 Roof Skid Plate. Package includes replacement skid plate and four 3x12mm cap head screws.
Planet gears (4)/ planet shafts (4)/ sun gears (2)/sun gear alignment shaft (1) all hardened steel Replacement hardened-steel internal gears for 2...
View full details
TRA9583 Traxxas Differential output cup, front or rear (hardened steel)
This is the Spool Housing, Spool Shaft and Bushing for the Traxxas 4-Tec 2.0 chassis and Ford GT. Features: Molded Composite Housing & Bush...
View full details
TRA9519X Traxxas Mud guards, rear, blue (left and right)/ 3x15 CCS (2)
Bumper, front/ bumper support Replacement front bumper with bumper support Replacement part for these models: Rustler® 4X4 Brushless Rustler® 4X...
View full details
TRA9537 Traxxas Steering blocks, left & right/ M4x0.7 NL (4)
Steering blocks, left & right Left and right steering blocks Replacement part for these models: Maxx® Slash® Maxx®
This is a set of replacement Traxxas molded composite toe links, and are intended for use with the Traxxas 1/16 Slash. Features: Plastic In...
View full details
This is the Traxxas X-Maxx Green Aluminum Motor Mount Washer and Screw Set. This set includes four washers and four screws.FitsX-Maxx 6SX-Maxx 8S
