Pinion gear, differential, 11-tooth (rear) (heavy duty) (use with #7792 35-tooth differential ring gear) Heavy-duty 11-tooth rear differential pin...
View full details
Body mounts & posts, front & rear (complete set) Front and rear body posts and mounts. Includes screws. Replacement part for these models...
View full details
Differential output yoke assembly, extreme heavy duty (2) (left or right, front or rear) (assembled with external-splined half shaft)/ screw pin (...
View full details
This is the throttle & brake linkage set for the REVO from Traxxas.Includes: Throttle & brake linkage rods Springs Thumb nut Various other...
View full details
TRA9586 Traxxas Differential output cup, center (hardened steel)/ 2.5x12
TRA9554 Traxxas Stub axle, rear (for use only with #9557 rear driveshaft)
Traxxas Maxx Front/Rear Skidplate Set. Package includes replacement front and rear skidplates. Replacement part for these models: Maxx®
This is the Driveshaft Assembly for the Traxxas 1/16 Slash 4WD. Features: Nylon construction Black in color Fits left or right Includes: (...
View full details
Ball Bearing, black rubber sealed (17x26x5) (2) Pair of 17x26x5 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal be...
View full details
Skidplates, front & rear (black) Black front and rear skid plates Replacement part for these models: Ford® F-150 Raptor Ford® F-150® Raptor ...
View full details
Heat sink, Velineon® 380 brushless motor, aluminum (blue-anodized) Add the blue-anodized aluminum heat sink to your Velineon 380 brushless motor t...
View full details
This is a replacement Traxxas Maxx Center Skidplate, intended for use with the Maxx 1/10 Brushless Monster Truck.
Suspension pin set, front or rear corner (hardened steel), 4x85mm (1), 4x47mm (3), 4x33mm (2) (qty 4, #7740 required for complete set) Hardened ste...
View full details
Traxxas Drag Slash Magnum 272R Gearbox Halves. Package includes replacement gearbox halves. Features: Plastic Includes: (1) Gearbox Halves
Fender flares, front & rear (2 each) (fits #8011 or #8211 series bodies) Front and rear fender flares for the TRX-4® 8011-series Land Rover® ...
View full details
This is a set of 2 Traxxas 15x24x5mm Rubber Sealed Ball Bearings in Black.Features: Steel construction with black rubber seals Used as the outer b...
View full details
This is a set of eight Traxxas Heavy Duty Toe Link Rod Ends with pre-installed hollow balls ready for installation on the E-Revo VXL Brushless.
Gear set, differential, metal (output gears (2)/ spider gears (4)/ ring gear, 35T (1)/ 2x14.8mm pin (1)) Replace the standard plastic gears in you...
View full details
This is the Traxxas Gearbox housing/ motor plate.. This is Traxxas part number 7590XPart Number: 7590X / TRA7590XFitsLaTrax SSTLaTrax Teton
TRA5102A Ball bearings, black rubber sealed (15x21x4mm) (2)
TRA9549 Traxxas Toe links, front (2) (assembled with hollow balls)
Features:Steel and aluminum constructionIncludes:Two each; Shafts and Aluminum SpacersFour Gear Pads
Clutch shoes (2)/ spring (T-Maxx/Revo/Jato/Nitro 4-Tec) Replacement part for these models: Jato® Revo® Slayer® Pro 4X4 T-Maxx® TRX® 2.5R TRX® 3.3...
View full details
Chassis top brace Replacement X-Maxx® chassis top brace Replacement part for these models: X-Maxx® Ultimate X-Maxx®
Mirrors, side (left & right)/ snorkel/ mounting hardware (fits #8111 or #8112 body) Replica side mirrors and snorkel for the 8111 and 8112 TRX...
View full details
This is a replacement Traxxas TRX-4 Front and Rear Shock Tower Set.Includes:(1) Front Left Tower(1) Front Right Tower(1) Rear Left Tower(1) Rear Ri...
View full details
Oil, differential (500K wt) (0.7 oz (20cc)) Thick 500k weight differential oil adds significant locking action to your differentials. Traxxas perf...
View full details
Bumper, front Front bumper Replacement part for these models: X-Maxx® Ultimate X-Maxx®
This is a set of 2 Traxxas 15x24x5mm Rubber Sealed Ball Bearings in Blue.Features: Steel construction with blue rubber seals Used in the front and...
View full details
This is a replacement Traxxas Rear Suspension Arm Set. Features:Factory Replacement Suspension Arm Set Includes: (2) Upper Suspension Arms (Right...
View full details
Ring gear, differential, 42-tooth (use with #7777, #7778 13-tooth differential pinion gears) 42-tooth differential ring gear. Use with 7777 13-toot...
View full details
Suspension arms (front) (2) Black front suspension arms (L&R) Replacement part for these models: BIGFOOT® No. 1 Officially Licensed Replica ...
View full details
Suspension arm set, front (includes upper right & left and lower right & left arms) Front suspension arm set includes upper right & le...
View full details
This is a pair of upper suspension arms for the Traxxas X-Maxx Monster Truck. Features: Molded composite plastic construction for reduced weight F...
View full details
Traxxas left and right rear bulkheads for the T-Maxx 3.3 fastens to rear skidplate and holds rear diff in place. Constructed of hardened plastic IN...
View full details
Traxxas progressive-1 rocker arm set for the Revo. They are part of the suspension and act as a cantilever system for the Front & Rear Shocks. ...
View full details
Turnbuckles, toe link, 55mm (75mm center to center) (2)
Traxxas Wheels, Method 105 1.9" (charcoal gray, beadlock) (beadlock rings sold separately)
TRA5153R Drive cups, inner (2) Revo (steel constant-velocity driveshafts)/screw pin, M4/15(2) (for use only with 5333R adjustable wheelbase rear su...
View full details
This is a replacement Traxxas TRX-4 Lower Gear Cover Skid-plate Set. Features:Factory Replacement Parts Includes:(1) Lower Gear Cover Skid-plate Set
This is a set of 4 Traxxas 3x18mm left and right (2 each) Battery Hold Down Mounts.Features: Molded composite plastic construction Fastens to chas...
View full details
This is the Traxxas chassis crossmember set. Includes: One intermediate One rear Left and right shock mounts
This is a pack of two replacement Traxxas Unlimited Desert Racer Rear Axle Differential Carriers, including the left and right side halves. Feature...
View full details
This is the Traxxas 35mm Flywheel with Magnet.Features: For Traxxas glow powered vehicles Magnet provides an RPM sensor to read RPM data Includes...
View full details
This is the Traxxas 4-Tec 2.0 Front Bulkhead. This is used in both the Ford GT and Mustang GT versions.Fits4-Tec 2.0
This is a replacement Traxxas 4-Tec 2.0 Rear Suspension Arm Set. Features:Factory Replacement Part Includes:(2) Rear Suspension Arms
This is the front heavy duty stub axles for the Stampede 4x4 from Traxxas.Features: Plastic and steel constructionIncludes: 2 Stub axlesRequires: I...
View full details
This is the front bumper and mount for the Traxxas Summit.Features: Black plastic with mounting hardwareIncludes: Front bumper and mountRequires: I...
View full details