TRA5041 Traxxas Grease, premium high performance (20cc)
TRAXXAS
TRA5041 Traxxas Grease, premium high performance (20cc)
TRA5041 Traxxas Grease, premium high performance (20cc)
This is a set of Traxxas Maxx’s extreme-duty cold-weather suspension arms, available in 6 colors to allow you to customize your truck to your style...
View full details
TRA9532 Traxxas Caster blocks (c-hub), left & right/ kingpin bushings (4
TRA9534X Traxxas Suspension arm, rear (left), blue
This is a replacement pack of Traxxas 72mm GT-Maxx Steel Shock Shaft with a chrome finish with Rod Ends, intended for use with the Maxx 1/10 Brush...
View full details
Wheel nuts, splined, 17mm, serrated (black-anodized) (4) Set of four 17 mm wheel nuts are serrated for extra bite on the wheel to keep them snug n...
View full details
Bumper, front, winch, TRX-4® Sport (includes bumper mount, D-Rings, fairlead, hardware) (fits TRX-4® Sport with 8855 winch) (191mm wide)Accessory p...
View full details
Wheel nuts, splined, 17mm, serrated (red-anodized) (4) Set of four 17 mm wheel nuts are serrated for extra bite on the wheel to keep them snug n...
View full details
This is a Traxxas Aluminum Center Driveshaft Assembly.Features: Aluminum construction with natural silver colored finish Double sided steel gear m...
View full details
This is a replacement set of Body Mounts for the Front and Rear of the Traxxas Rustler 4x4 VXL. Features:Factory replacement Part Includes: (1) Fr...
View full details
Drive cup (1)/ 3x8mm CS (for use only with #7750X driveshaft) X-Maxx® drive cup with 3x8 mm set screw. For use with 8s-spec heavy duty driveshaft ...
View full details
Suspension arms, front (right), heavy duty (upper (1)/ lower (1)) Heavy-duty E-Revo® suspension arms utilize our latest proprietary composite mat...
View full details
Ring gear, differential/ pinion gear, differential 1/16 scale differential ring and pinion gears Replacement part for these models: 1/16 E-Revo®...
View full details
Ball bearings, blue rubber sealed (4x8x3mm) (8) Set of eight 4x8x3 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime ...
View full details
This is a front winch bumper that fits that Traxxas TRX-4 1979 Bronco & Blazer with 8855 winch. Features: D-rings Fairlead Includes: (...
View full details
Turnbuckles, aluminum (red-anodized), toe links, 59mm (2) (assembled with rod ends & hollow balls) (requires 5mm aluminum wrench #5477)
This is a set replacement rear upper and lower bulkheads intended for the Traxxas Maxx vehicle. Features:Factory Replacement Bulkheads Includes: (...
View full details
This is the outer driveshaft assembly for the VXL Summit from Traxxas.Features: Metal constructionIncludes: Driveshaft assemblyRequires: Installati...
View full details
This is the inner driveshaft assembly for the VXL from Traxxas.Features: Plastic constructionIncludes: Inner Shaft assembly and M2x8 Screw PinRequi...
View full details
Traxxas motor mount is constructed of silver aluminum. Replaces damaged motor mount. Requires: Motor Mount Hinge Post Specs:Length: 58.2mm (2.29")W...
View full details
The Traxxas E-Revo 2.0 Heavy-Duty Rear Left Suspension Arm Set features a design which incorporates latest proprietary composite material. Traxxas ...
View full details
This is a set of Traxxas Maxx’s extreme-duty cold-weather suspension arms, available in 6 colors to allow you to customize your truck to your style...
View full details
This is the Heavy Duty Rear Left Suspension arms for the E-Revo VXL Brushless by Traxxas. Part # 8934X Features: Heavy Duty Blue in color ...
View full details
Bumper, front, winch, narrow (includes bumper mount, D-Rings, fairlead, hardware) (fits TRX-4® Land Rover® Defender® and Tactical Unit with 8855 wi...
View full details
This is the Heavy Duty Rear Right Suspension arms for the E-Revo VXL Brushless by Traxxas. Part # 8633X Features: Adjustable Wheelbase Heavy ...
View full details
Traxxas clutch bells are made from durable steel for long-lasting performance. Available in a variety of sizes to fine tune your truck's gear ratio...
View full details
This is the optional differential spool for the Traxxas T-Maxx Truck. This is located in the bulkhead and eliminates the differential. This part is...
View full details
Traxxas aluminum engine mounting set is constructed of aluminum. Hex drives and Phillips drive. This set has all of hardware to assemble the engine...
View full details
Traxxas 3994X Shaft Low Idler Gear Shaft E-Maxx This is the Lightweight Output/Idler Gear Shaft for the Traxxas E-Maxx.This shaft is located in th...
View full details
Turnbuckles, aluminum (red-anodized), toe links, 61mm (2)(assembled with rod ends & hollow balls) (fits Stampede) (requires 5mm aluminum wrench...
View full details
Turnbuckles, aluminum (blue-anodized), toe links, 61mm (2) (assembled with rod ends & hollow balls) (fits Stampede) (requires 5mm aluminum wren...
View full details
Idler gear, machined-aluminum (not for use with steel top gear) (hard-anodized) (30-tooth)
The Traxxas X-Maxx Heavy-Duty Right Lower Suspension Arm features a design which incorporates latest proprietary composite material. Traxxas design...
View full details
This is the Front Right Suspension Arms for the E-Revo VXL Brushless from Traxxas. Part # 8631X Features: Heavy Duty Blue in color Include...
View full details
This is the Front Left Suspension Arms for the E-Revo VXL Brushless from Traxxas. Part # 8632X Features: Heavy Duty Blue in color Includes...
View full details
Heavy-Duty X-Maxx® Suspension Arm Heavy-duty X-Maxx lower suspension arms utilize our latest proprietary composite material for extreme durabilit...
View full details
This is the replacement Half Shaft Set for use with the Traxxas Maxx #8995 WideMaxx™ Suspension Kit. Features: For use on Left or Right side Pl...
View full details
Box, receiver (sealed)/ foam pad/ silicone grease/2.5x8mm BCS (2)/ 3x10mm CCS (2)/ 3x15mm CCS (2) Sealed receiver box for Traxxas micro receivers....
View full details
This is the Heavy Duty Lower Left Suspension Arm for the Traxxas X-Maxx Monster Truck. Features: Green in color Heavy Duty Molded composite pla...
View full details
This is an optional Traxxas 4-Tec 2.0 Aluminum Center Driveshaft. Features: Optional Drive Shaft Aluminum Construction Green Anodized Finish I...
View full details
This is the Traxxas black left and right side trim set. Includes: (8) side trim retainers Left, right & rear door handles Door handle mount (...
View full details
These are the Traxxas E-Revo 2.0 Red Left Rear Upper & Lower Heavy Duty Adjustable Wheelbase Suspension Arms
TRA9533T Traxxas Suspension arm, rear (right), orange
TRA9534T Traxxas Suspension arm, rear (left), orange
This is a pack of two replacement Traxxas Unlimited Desert Racer Rear Upper Suspension Links. These links are 4x206mm, center to center and featur...
View full details
This is a replacement decal sheet intended for the Mercedes-Benz G 63® AMG 6x6 Body. Features:Factory Replacement Decal Sheet Includes:(1) Complete...
View full details
High-speed needle valve & seat assembly (w/ securing nut) Replacement part for these models: TRX® Pro .15 TRX® Pro .15 Marine
This is the locking differential ouput gear for use on the Traxxas Summit Truck RTR.Features: Steel constructionIncludes: Locking Differential Out...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 4pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS