TRAXXAS CARS AND TRUCKS AND PARTS IN STOCK 2025

Front Springs for Bandit (2); Pink

This is the Traxxas Camber rods, 2-degree/3-degree (6 each). This is Traxxas part number 7539Part Number: 7539 / TRA7539FitsLaTrax Rally

This is the Traxxas pair of Nerf Bars for the 1/10 scale Rally VXL, (2).Features: Black colored Made of plastic For the Traxxas Rally VXL Include...

This is the motor cover plate for the Traxxas 1/16 scale Fiesta and Kyle Busch Race Truck.Features: Composite constructionIncludes: Motor Cover Mo...

This is a set of replacement Traxxas GTR shock caps with spring retainers, and are intended for use with the Traxxas 1/16 Slash, and 1/16 E-Revo ve...

These are the GTR shock shafts for use on the Traxxas 1/16 E-Revo and Slash VXL vehicles.Features: Aluminum construction that is silver in colorInc...

These are the rod ends for the 1/16 scale Traxxas Revo and Slash series.Features: Black nylon constructionIncludes: Eight Nylon Rod Ends Eight Nyl...

Differential output yokes, heavy duty (2)/ screw pin (2) Pair of heavy-duty differential output yokes with screw pins (2)

This is the Center Driveshaft for the Traxxas 1/10 scale Telluride 4x4.FEATURES:Plastic construction, blue in colorINCLUDES:Center Driveshaft with ...

This is the Mounts for the Traxxas RPM Sensor (Nitro Engines). Features:   Plastic and metal construction   Includes:   (3) Different plasti...

This is the Input Shaft/ PinFor the Traxxas Cush drive outputFEATURES:Steel constructionINCLUDES:One input shaftOne pinCOMMENTS:This part is for th...

This is the Traxxas Nerf bars, chassis (black). This is Traxxas part number 5923Part Number: 5923 / TRA5923FitsSlayerSlayer Pro

This is the housing for the front and rear differential on the Traxxas Summit Truck RTR.Features: Nylon construction that is black in colorIncludes...

Traxxas 5677A Cover Gear 3x8mm CS Revo (1)This is the Gear Cover for the Traxxas Revo.FEATURESPlastic construction, black in colorFor the single mo...

This is an optional Traxxas Rear Suspension Hinge Pin Mount Set. These blocks feature different anti-squat angles which will alter the suspension c...

These are the rear left and right stub axle carriers for the Traxxas Nitro Jato Stadium Truck.Features: Nylon construction that’s black in colorInc...

FEATURES: Nylon and Metal construction Black in color INCLUDES: One 3mm x 30mm Threaded Rod Two 3mm Ball Cups Two 3mm Hollow Balls One Nylon Steeri...

This is the steering drag link with screw for the Traxxas Nitro Jato Stadium Truck.Features: Nylon construction that’s black in colorIncludes: One...

This is the Replacement Differential Output Yokes for the Jato by Traxxas. Features: Nylon construction Black in color   Includes: (2) Diffe...

This is optional Heavy Duty Rod Ends from Traxxas. Features: Heavy duty plastic construction Black in color   Includes: (8) Rod Ends   Spec...

These are the diff and trans drive yokes for the Traxxas T-Maxx 3.3.Features: Black plastic constructionIncludes: Two drive yokes Two 4x15mm Yoke ...

This is the Brake Yoke w/Pins for the Traxxas Revo.It is use on the Center/Front Driveshaft Assembly.FEATURES:Plastic Brake YokeSteel Brake Pins(ea...

This is a pair of replacement drive yokes for the Traxxas Revo. These yokes attach to the half shaft assemblies.Features: Black plastic constructio...

FEATURES: Black plastic and steel wire construction INCLUDES: One ball link One straight linkage rod One coiled linkage rod One servo horn

This is the front and rear differential housing for the Revo from Traxxas.Features: Durable black nylon constructionIncludes: One diff housing (2 p...

This is the small rod end set for the Traxxas Revo.Features: Plastic construction that’s black in color Metal Pivot Balls Includes: Six Rod Ends ...

This is the steering linkage for the Traxxas Revo.Features: Connects between servo horns and steering armsIncludes: Two 3x30mm steel turnbuckles, f...

TRA5281 Control box battery cover w/ belt clip (EZ-Start 2)

Ball bearings, blue rubber shield (5x10x4mm) (2) Pair of 5x10x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out...

This is the Replacement 43 Tooth 1st Speed Spur Gear for the Traxxas T-Maxx4WD Radio Control Monster Truck.This spur gear is installed in the trans...

TRA4980X Housings, diff (ring side/ non-ring side) (1 each)/ pinion collar (1)

Traxxas throttle and brake servo mounts for the T-Maxx 3.3 is constructed of gray plastic. Includes: Two servo mounts Specs:Length: 1-3/8" (36mm)Wi...

Traxxas servo steering/shift mounts for the T-Maxx 3.3 are made of gray plastic construction. Includes: Two mounts  Specs:Length: 1-1/2" (38mm)Widt...

This is a set of two replacement differential output yokes from Traxxas. These yokes attach to the differential, and the half shafts that drive the...

This is the fuel tank rebuild kit for the Traxxas Rustler.Features: Direct fit replacement partsIncludes: Tank cap Tank seal Tank cap spring Small...

TRA4428 EZ-Start mount/ clamp/ 2.6x10mm RST (4)

This is the Replacement Idler Gear and Shaft for the Nitro Stampede/Rustler.This gear is located in the transmission. Features White nylon construc...

These are the 3mm x 10mm shoulder screws for the Traxxas Nitro Jato Stadium Truck.Features: Metal construction that’s black in colorIncludes: Six 3...

Traxxas Shoulder screws, 3x10mm (6) (with threadlock)

TRA3940 Screws, 4x4mm button-head machine, aluminum (blue) (hex drive) (6)

Caster blocks (left & right) (30-degree) Replacement left and right 30° caster blocks Replacement part for these models: Bandit® VXL Bandit®...

Traxxas tie-rods and upper camber rods are constructed of steel. Includes: Four Turnbuckles Two Draglinks. These turnbuckles are used on the steeri...

Anchoring pins with locknuts (4)/ plastic thumbscrews for upper deck (4)

This is a replacement Traxxas Front & Rear Steel Bulkhead Tie Bar Set, and is intended for use with the Traxxas 1/16 Grave Digger Monster Jam R...

Manufacturer Description This is the Replacement Carrier Drive Dog for Traxxas E-Maxx Truck.This part is located in the gearbox in between the two ...

TRA4919 Servo mounts, throttle/ brake (1) (black)

This is a replacement Traxxas Receiver Cover, and is intended for use with the Traxxas Nitro Sport 1/10 Scale Nitro Truck.