Filters
Accessories
Brand
- APC
- ARRMA
- Big Boys With Cool Toys
- BLADE
- CARRERA
- CASTLE CREATIONS
- DLE ENGINES
- DROMIDA
- DU-BRO
- E-FLITE
- ESTES
- FLYZONE
- FMS
- FUTABA
- GREAT PLANES
- GUILLOW
- HANGAR 9
- HOBBY ZONE
- HUBSAN
- O.S. ENGINE
- PARKZONE
- PARROT
- RAM
- SPEKTRUM
- YUNEEC
Capacity
Component
Current
Level
Model
Options
Part Type
Part
Parts Category
Parts
Power Input
Power
Sensored
Size
Type
Voltage
IN STOCK ITEMS
TRA3725X Battery expansion kit
TRAXXAS
Battery expansion kit (allows for installation of taller multi-cell battery packs) (Rustler®, Bandit, Stampede®) The battery expansion kit allows ...
View full details
TRA4728 Gear, pinion (28-tooth) (48-pitch)/ set screw
TRAXXAS
This is a 28-tooth 48-pitch replacement pinion gear for the Traxxas 4-Tec.Features: Ideal replacement part for fine tuning your Traxxas 4-Tec 4WD ...
View full details
TRA7713X Traxxas Body support, rear/ 3x15mm CS (2) for X-Maxx
TRAXXAS
Traxxas X-Maxx Rear Body Support. Package includes replacement rear body support and hardware. Includes: Rear body Support (2) 3x15mm CS (2) 3x1...
View full details
TRA3632X Caster blocks, 30-degree, red-anodized 6061-T6 aluminum
TRAXXAS
Caster blocks, 30-degree, red-anodized 6061-T6 aluminum (left & right)/ suspension screw pin (2) Red aluminum 30° caster blocks improve the a...
View full details
TRA3147X Fuel line (610mm or 2ft)
TRAXXAS
Fuel line (610mm or 2ft) 24" fuel line Replacement part for these models: Jato® Nitro Rustler® Nitro Slash Revo® Slayer® Pro 4X4 T-Maxx® Access...
View full details
TRA9052X Driveshafts, rear, steel-spline constant-velocity (complete assembly) (2)
TRAXXAS
Driveshafts, rear, steel-spline constant-velocity (complete assembly) (2)Extreme heavy-duty steel CV (constant velocity) driveshafts for the Traxxa...
View full details
TRA5655 Half shaft set, short (plastic parts only) (internal splined half shaft/ external splined half shaft/ rubber boot) (assembled with glued boot) (2 assemblies)
TRAXXAS
These are the short half shafts for use on the Traxxas Summit Truck RTR.Features: Plastic construction that’s black in colorIncludes: Two Short Hal...
View full details
TRA7742 Suspension pin set, shock mount (front or rear, hardened steel), 4x25mm (2), 4x38mm (2)
TRAXXAS
This is a replacement Traxxas X-Maxx Hardened Steel Shock Mount Suspension Pin Set, including two 4x25mm and two 4x38mm pins. For use in the front ...
View full details
TRA6814 Differential kit, center (complete)
TRAXXAS
Differential kit, center (complete) The optional center differential transfers power to the front and rear differentials independently for smooth ...
View full details
TRA7752X Traxxas X-Maxx HD Rear Axle Carrier Set - uses 5196A 20x32x7
TRAXXAS
Carriers, stub axle (left & right) (requires 20x32x7 ball bearings) Left and right stub axle carriers. Required 20x32x7 bearings. Replacemen...
View full details
TRA7611 Body, Teton (clear, requires painting)/decal sheet
TRAXXAS
Features: Clear molded polycarbonate construction Trimmed out wheel arches and body post holes Includes: Latrax Teton Clear Body with Decal Sheet...
View full details
TRA2591 Screws, 3x23mm button-head machine (hex drive) (6)
TRAXXAS
Screws, 3x23mm button-head machine (hex drive) (6) 3x23 mm button-head machine screws with hex drive heads. Set of six. Replacement part for thes...
View full details
TRA1747G Nuts, aluminum, flanged, serrated (4mm) (green-anodized)(4)
TRAXXAS
Nuts, aluminum, flanged, serrated (4mm) (green-anodized)(4)
TRA7045R Spur gear, 45-tooth
TRAXXAS
Traxxas 48 Pitch Spur Gears are available in 45, 50 or 55 tooth count options to fine tune the gear ratio of your model. Fits: Traxxas 1/16 E-Revo...
View full details
TRA5334R Axle carriers, left & right (1 each)
TRAXXAS
These are the optional axle carriers left and right for use on the Traxxas Revo series.Features: Nylon construction that’s black in color Allows f...
View full details
TRA6877A Cover, gear (clear)
TRAXXAS
This is the optional clear gear cover for use on the Traxxas Slash 4x4.Features: Plastic construction that is clear in colorIncludes: One Clear Gea...
View full details
TRA6868 Springs, rear (progressive, +20% rate, blue) (2)
TRAXXAS
Springs, rear (progressive, +20% rate, blue) (2) Pair of XX-long progressive-rate springs are custom-wound to provide responsive control over smal...
View full details
TRA6747 Gear, 11-T pinion (32-p) (mach. steel)/ set screw
TRAXXAS
Gear, 11-T pinion (32-p) (steel) (fits 3mm shaft)/ set screw 11-tooth pinion gear (32-pitch) fits 3 mm motor shafts and includes set screw. Traxxa...
View full details
TRA3953 Spur gear, 36-tooth (1.0 metric pitch)
TRAXXAS
This is the optional 36 tooth spur gear for the Traxxas Revo monster truck. This spur gear goes on the gear box to transfer power from the clutch b...
View full details
TRA6815R Body mount (1)/ body mount post (2)/ body post extensions (2) (front or rear)
TRAXXAS
This is the Traxxas Front/Rear Body Mount for the Slash 4x4.Features: Black colored For the Traxxas Slash 4x4 Hardened plastic construction Inclu...
View full details
TRA7636 Camber links (4)/ toe links (2)
TRAXXAS
This is a replacement LaTrax Camber and Toe Link Set. This set includes four camber links and two toe links. Features:Factory Replacement Camber an...
View full details
TRA6830X Bulkhead, front
TRAXXAS
This is the front bulkhead for the Traxxas Slash 4x4.Features: Composite plastic construction that is black in color Fastens to front of chassis a...
View full details
TRA4579X Connector, wiring harness (EZ-Start and EZ-Start 2)
TRAXXAS
Traxxas updated wire harness for the EZ Start and EZ Start 2 Systems. This harness has the white connector that the EZ Start pack plugs into. Extra...
View full details
TRA3631 Suspension arms (front) (2)
TRAXXAS
Suspension arms (front) (2) Black front suspension arms (L&R) Replacement part for these models: BIGFOOT® No. 1 Officially Licensed Replica ...
View full details
TRA7763 Shock shafts, GTX, 110mm (assembled with rod ends & hollow balls) (steel, chrome finish) (2)
TRAXXAS
Shock shafts, GTX, 110mm (assembled with rod ends & hollow balls) (steel, chrome finish) (2) Pair of replacement 110 mm steel shock shafts wit...
View full details
TRA3933 Screws, 4x16mm button-head machine (hex drive) (6)
TRAXXAS
These are the 4x16mm Button Head Machine Screws from Traxxas.Features: For use in the Traxxas Revo and also anywhere a screw this size is required...
View full details
TRA89086-4 Traxxas Maxx 4S V2 Brushless Monster Truck w/ WideMaxx - Green YOU will need this part # TRA2998 to run this truck
TRAXXAS
MAXX 1/10 Scale MAXX Monster Truck MODEL 89086-4: Maxx 1/10 scale monster truck. Fully assembled, Ready-To-Race®, with TQi™ 2.4 GHz radio system...
View full details
TRA2550 Screws, 3x8mm countersunk machine (6) (hex drive)
TRAXXAS
Screws, 3x8mm countersunk machine (6) (hex drive) 3x8 mm countersunk machine screws with hex drive heads. Set of six. Replacement part for these ...
View full details
TRA2587 Screws, 3x10mm cap-head machine (6) (no washer)
TRAXXAS
Screws, 3x10mm cap-head machine (6) (no washer)
TRA5134 Caster spacers (4)/ shims (4)
TRAXXAS
This is a package of replacement caster spacers for the Traxxas 2.5 T-Maxx. These spacers adjust caster of the wheels.Features: Black nylon constru...
View full details
TRA7047R Spur gear, 55-tooth
TRAXXAS
Spur gear, 55-tooth 55-tooth spur gear (48-pitch) with telemetry magnet holder. Traxxas spur gears let you fine-tune the performance of your Traxx...
View full details
TRA7077R Cover, gear/ motor mount hinge post
TRAXXAS
Cover, gear/ motor mount hinge post/ 3x10mm CS with split and flat washers (1)/ 3x8mm BCS (1) Replacement gear cover with motor mount hinge post a...
View full details
TRA44056-3 HAWAIIAN 1/10 Nitro Slash 2WD SC RTR w/TRX 3.3 **SOLD SEPARATELY you will need this fuel for this car TRA5020
TRAXXAS
¶ MODEL 44054-1: Nitro Slash: 1/10 scale 2WD nitro short course truck, fully assembled, Ready-To-Race®, with TQi™ 2.4 GHz radio system with T...
View full details
TRA3943X Traxxas 32P Hardened Steel Pinion Gear (13)
TRAXXAS
Gear, 13-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw The heavy-duty 13-tooth (32-pitch) pinion gear is mach...
View full details
TRA5124 Ball bearings, blue rubber sealed (4x7x2.5mm) (2
TRAXXAS
Ball bearings, blue rubber sealed (4x7x2.5mm) (2) Upgrade your standard plastic bellcrank bushings with these 4x7x2.5 mm blue-seal bearings for ...
View full details
TRA3936 Screws, 4x10mm button-head machine (hex drive) (6)
TRAXXAS
This is a 4x10mm button head screw set for the Traxxas Revo vehicle.Features: Steel construction that’s black in color Low-profile, button-head de...
View full details
TRA5270R EZ-Start 2, complete system with controller, drive unit, wiring harness
TRAXXAS
Traxxas EZ start system is a simple push-button starting for glow plug and starter motor. LED status for both glow plug and starter motor All-in-on...
View full details
TRA2072X Gear set, metal (for 2070, 2075 servos)
TRAXXAS
Gear set, metal (for 2070, 2075 servos) Replacement high-torque metal gear set for 2075X servo. Gears may also be used to upgrade 2070, 2075, and ...
View full details
TRA7785X Input gear, transmission, 20-tooth/ 2.5x12mm pin
TRAXXAS
This is a replacement Traxxas 20 Tooth X-Maxx Transmission Input Gear. One 2.5x12mm pin is also included. Features: 20T Replacement Part Include...
View full details
TRA6890 Plate, motor
TRAXXAS
PLATE, MOTOR Replacement blue aluminum motor plate Replacement part for these models: Ford® F-150® Raptor R™ 4X4 Hoss® 4X4 VXL Slash 4X4 VXL Sla...
View full details
TRA2583 Screws, 3x18mm button-head machine (hex drive) (6)
TRAXXAS
Screws, 3x18 button-head machine (hex drive) (6) 3x18 mm button-head machine screws with hex drive heads. Set of six. Replacement part for these ...
View full details
TRA6737 Bumper, rear/ bumper mount, rear
TRAXXAS
Traxxas Rustler 4X4 Rear Bumper. Package includes replacement rear bumper and mount components. Features:Factory Replacement Bumper Components Incl...
View full details
TRA3958 Spur gear, 58-tooth (0.8 metric pitch, compatible with 32-pitch)
TRAXXAS
Spur gear, 58-tooth (0.8 metric pitch, compatible with 32-pitch) 58-tooth spur gear (32-pitch). Traxxas spur gears let you fine-tune the performan...
View full details
TRA8080 Fenders, inner (narrow)
TRAXXAS
Fenders, inner (narrow), front & rear (2 each)/ rock light covers (8)/ battery plate/ body mount/ 3x8 flat-head screws (4)/ 2.5x6 CS (10) Narr...
View full details
TRA6727X Hold down, battery/ hold down retainer/ battery post/ angled body clip
TRAXXAS
This is the optional Battery Hold Down for the Traxxas Stampede 4x4 VXL.Features: Composite construction Allows installation of taller multi-cell ...
View full details
TRA6487X Gear, 15-T pinion 1.0 metric pitch fits 5mm shaft
TRAXXAS
Gear, 15-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears) 15-tooth pinion gear (1.0 metric pitch) fits...
View full details