Save 85%
BBTRX2BAN Traxxas to Banana Plug
Big Boys With Cool Toys
BBTRX2BAN Traxxas to Banana Plug
Save 85%
BBTRX2BAN Traxxas to Banana Plug
This is a 2 pack of Traxxas 5x11x4mm blue rubber sealed ball bearings for the Revo. Rubber-sealed ball bearings provide smooth, long-lasting and pr...
View full details
Body clips (12) (standard size) Standard-duty body clips. Sold as a pack of 12. Replacement part for these models: 1/16 E-Revo® VXL 1/16 E-Revo®...
View full details
These are a pack of 12 replacement LaTrax Body Clips perfect for 1/18 scale vehicles.Features:Silver ColorCurved end to ease removalIncludes:12 Bod...
View full details
Traxxas EZ Peak Plus 4amp Charger iD Auto Battery Identification TRA2970 EZ-Peak® Plus 4-amp NiMH/LiPo Fast Chargerwith iD® Auto Battery Identifica...
View full details
Suspension pins, 2.5x31.5mm (king pins) w/ E-clips (2) (strengthens caster blocks) Replace the stock screw pins with these heavy-duty steel suspen...
View full details
OVERVIEW AC to DC adapter Designed specifically for use with the Traxxas peak detecting DC fast chargers, the new AC to DC Adapter from Traxxas l...
View full details
6700mah 14.8v 4-Cell 25C LiPo Battery Traxxas takes battery power to the next level with new 4-cell LiPo battery. The 6700 mAh capacity and 50C...
View full details
Charge Two Batteries at OncePowerful 8-Amp Output with iD® Convenience Charging Solved!Simple. Fast. Just plug in a pair of Traxxas iD® batter...
View full details
This is a set of 10x15mm ball bearings for use on the Traxxas Revo.Features: Steel Construction Shielded with blue rubber seals Includes: Two Bal...
View full details
2200mah 7.4v 2-Cell 25C LiPo Battery Traxxas Certified iD®-Equipped LiPo batteries provide the punch and on-demand power to reach the top speeds...
View full details
Driveshaft assembly, front, heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1) The front heavy-duty driveshaft come...
View full details
Screws, 3x15mm button-head machine (hex drive) (6) 3x15 mm button-head machine screws with hex drive heads. Set of six. Replacement part for thes...
View full details
Driveshaft assembly, rear, heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1) The heavy-duty rear driveshaft comes ...
View full details
Body clips, black (12) (standard size) Standard-duty black body clips. Sold as a pack of 12. Replacement part for these models: 4-Tec® 2.0 AWD Ch...
View full details
These are the Suspension Screws Pins for the Traxxas Rustler, Stampede and Bandit. The hinge pins hold the suspension arms to the bulkheads.Feature...
View full details
Pivot ball caps (4)/ dust boots, rubber (4)/ dust plugs, rubber (4)/ dust boot retainers, black (4), blue (4) (2 pkgs. req. to complete truck) Piv...
View full details
Pro Scale® Remote Operated Winch for TRX-4® and TRX-6® Powerful, Realistic Winch Capability for Traxxas TRX-4 and TRX-6 The new Pro Scale winch ...
View full details
Big Bore shocks (hard-anodized & PTFE-coated T6 aluminum) (assembled with TiN shafts and springs) (front & rear) (4) Big Bore shocks provi...
View full details
Oil, differential (20M wt) (standard) Super-thick 20 million weight differential oil has the consistency of thick putty and is most often used in c...
View full details
This is a set of replacement Traxxas front and rear body posts, and are intended for use with the Traxxas 1/16 Slash, and 1/16 E-Revo vehicles. Fea...
View full details
Attachment screws, shock (3x12mm shoulder screws) (6) Set of six 3x12 mm shoulder screws (shock attachment screws) with Phillips-drive heads. Rep...
View full details
TRA3426 Traxxas Heavy-Duty Rubber Pit Mat 36x20" (91.4 x 50.8cm)
LED rock light kit, TRX-4®/TRX-6™ (requires #8028 power supply and #8018, #8072, or #8080 inner fenders) Traxxas LED Rock Lights install directl...
View full details
The 2075 digital ball bearing servo provides precise control, quick responses, and outstanding torque with a waterproof case for worry-free driving...
View full details
Traxxas® connector (male) (2) - FOR ESC USE ONLY Replacement male 3s connectors for Traxxas electronic speed controls. FOR ESC USE ONLY
This is a package of two 10x15mm Ball Bearings from Traxxas.FEATURES:Steel construction with black rubber dirt shieldsUsed with Traxxas vehicles, m...
View full details
Waterproof High-Torque Metal-Gear Servo (2075X) The 2075X waterproof High-Torque Metal Gear Servo combines commanding steering authority with the...
View full details
Stub axle pins (4) Set of four 2X10 mm stub axle pins Replacement part for these models: 4-Tec® 2.0 AWD Chassis 4-Tec® 2.0 Brushless AWD Chassis...
View full details
Body washers (8) Body washers reinforce the mounting point surface area to help prevent body clips from pulling through the body. Replacement par...
View full details
Turnbuckles, camber link, 49mm (82mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 right) Replace your non-adjustable ca...
View full details
Ball bearings, black rubber sealed (5x11x4mm) (2) Pair of 5x11x4 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal b...
View full details
Turnbuckles, camber link, 39mm (69mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 right) Replace your non-adjustable re...
View full details
Hold down, battery/ hold down retainer/ battery post/ foam spacer/ angled body clip (allows for installation of taller, multi-cell batteries) The ...
View full details
Clutch shoes (2)/ spring (T-Maxx/Revo/Jato/Nitro 4-Tec) Replacement part for these models: Jato® Revo® Slayer® Pro 4X4 T-Maxx® TRX® 2.5R TRX® 3.3...
View full details
Wheelie bar, assembled (blue) (fits Stampede®, Rustler®, Bandit series) The patented Traxxas adjustable wheelie bar features four-position adjustm...
View full details
Driveshafts, front, steel-spline constant-velocity (complete assembly) (2) Traxxas steel constant velocity driveshafts offer the ultimate in torqu...
View full details
Steering blocks, left & right (2) (requires 5x11x4mm bearings) Replacement left & right steering blocks. Requires 5x11x4 mm bearings. Re...
View full details
Suspension pins, 44mm (2) w/ E-clips 44 mm chrome suspension pins (2). Includes E-clips (4). Replace the stock screw pins with these heavy-duty st...
View full details
This is a tube of white lithium grease from Traxxas. This product can be used to lubricate parts, such as gears.Features: Great lubrication for nyl...
View full details
Shock rebuild kit (for 2 shocks) The shock rebuild kit includes the parts needed to rebuild two Ultra Shocks or Big Bore shocks used on Slash®, Ru...
View full details
Driveshaft assembly, front, extreme heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1) Designed for extreme perform...
View full details
Ball bearings, blue rubber sealed (6x12x4mm) (2) Pair of 6x12x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out...
View full details
Shock caps, aluminum (blue-anodized) (4) (fits all Ultra Shocks) Aluminum shock caps are great way to boost the durability and style of any Traxxas...
View full details
This is a bottle of Traxxas Differential Oil. This differential oil can be used for a variety of vehicle types. The thicker the oil, the less your ...
View full details
Spur gear, 83-tooth (48-pitch) (for models with Torque Control slipper clutch) 83-tooth spur gear (48-pitch) for Torque Control slipper clutches. ...
View full details
Ball bearings, blue rubber sealed (8x16x5mm) (2) Pair of 8x16x5 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out...
View full details
Suspension pin set, front or rear corner (hardened steel), 4x85mm (1), 4x47mm (3), 4x33mm (2) (qty 4, #7740 required for complete set) Hardened ste...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 11am to 4pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS