These are the Traxxas Assembled Glued Slick Tires and 12-Spoke Chrome Wheels for the LaTrax Rally Car.Features: Chrome and Black colored Premounte...
View full details
This is the brand new Traxxas Clear 1/18 Rally Body with Decals for the LaTrax Rally Car.Features: Clear - requires painting Made of lexan Decals ...
View full details
Box, receiver (sealed)/ foam pads/ 2.5x12mm CS (2)/ 3x6mm CS (2)/ 3x12mm BCS (2) Sealed receiver box for vehicles equipped with the low-CG 4X4 cha...
View full details
This is a set of two replacement Traxxas Canyon AT 2.2" Tires, and are intended for use with the Traxxas 1/16 Summit. These 2.2" Canyon AT tires fe...
View full details
This is the outer driveshaft assembly for the VXL Summit from Traxxas.Features: Metal constructionIncludes: Driveshaft assemblyRequires: Installati...
View full details
This is the inner driveshaft assembly for the VXL from Traxxas.Features: Plastic constructionIncludes: Inner Shaft assembly and M2x8 Screw PinRequi...
View full details
Ring gear, differential/ pinion gear, differential 1/16 scale differential ring and pinion gears Replacement part for these models: 1/16 E-Revo®...
View full details
Steering arm (upper & lower)/ steering link/ servo horn/ servo saver/ servo saver spring/ servo horn mount/ ball stud (2)/ shock mounts, front...
View full details
Steering bellcranks/ servo saver/ servo saver spring/ servo spring retainer/servo horn, steering Steering bellcrank set features bellcrank, servo ...
View full details
This is the Large Knurled Flywheel from Traxxas.FEATURES:Enables Traxxas glow powered vehicles to be started with a starter boxAluminum constructio...
View full details
Save 45%
This is a replacement Traxxas Temperature & Voltage Telemetry Sensor, and is intended for use with the Traxxas XO-1. Temperature data is critic...
View full details
Save 45%
This is an optional Traxxas "Short" Temperature & Voltage Sensor. Temperature data is critical to monitoring performance, gauging the effects o...
View full details
This is the short RPM sensor for the XO-1 on-road car from Traxxas.Features: Functions with the Traxxas Link system to display motor RPMIncludes: S...
View full details
This is an optional Traxxas "Long" Temperature & Voltage Sensor. Temperature data is critical to monitoring performance, gauging the effects of...
View full details
This is the Rear Diffuser for the Traxxas XO-1 On-Road Car, TRAD42**.FEATURES:Molded plastic constructionINCLUDES:Rear Diffuser
This is the Receiver Box for the Traxxas XO-1 On-Road Car, TRAD45**.FEATURES:Plastic construction with one-piece silicone sealINCLUDES:All Receiver...
View full details
This is the Rear Wing with Mounts and Washersfor the Traxxas XO-1 On-Road Car, TRAD45**.FEATURES:Constructed of molded plastic, black in colorINCLU...
View full details
This is the locking differential ouput gear for use on the Traxxas Summit Truck RTR.Features: Steel constructionIncludes: Locking Differential Out...
View full details
These are the 3.8 chrome geode wheels for use on the Traxxas Summit Truck RTR.Features: Nylon construction that’s chrome in color Beadlock style ...
View full details
Traxxas motor mount is constructed of silver aluminum. Replaces damaged motor mount. Requires: Motor Mount Hinge Post Specs:Length: 58.2mm (2.29")W...
View full details
Box, receiver (sealed)/ foam pad/ silicone grease/ 3x8mm BCS (2)/ 2.5x8mm CS (2)/ 3x6mm BCS (2) Waterproof receiver box includes foam pad, silic...
View full details
This is a Traxxas Differential Gear Set for the Jato. Includes:2x Output Gears2x Spider Gears1x Spider Gear Shaft
Traxxas engine mount and hardware is constructed of metal and silver in color INCLUDES: One Silver Engine Mount Two Engine Mount Spacers Four 3mm x...
View full details
This is the replacement Sway Bar Linkage Front for the optionalTraxxas Revo/Revo 3.3 sway bar kit - TRAC5598.FEATURES:Nylon and metal constructionB...
View full details
Driveshaft assembly (1), left or right (fully assembled, ready to install)/ 4x15mm screw pin (1) The fully-assembled driveshaft comes complete and...
View full details
This is the optional differential spool for the Traxxas Revo.Features: Constructed of steel Installs in diff housing on either front or rear wheel...
View full details
Traxxas set of 17mm Gemini Chrome Wheels used on the Revo. Also fits Traxxas T-and E-Maxx vehicles, use with 17mm splined wheel hubs & nuts, pa...
View full details
This is a pair of dished 3.8 wheels in white from Traxxas.Features: White in color Designed for use with 17mm Splined Wheel Hubs and Nuts Include...
View full details
This is the Traxxas Air Filter Body with Hardware included for the Nitro Slash.Features: Black and pink colored Made of plastic and foam Replaces ...
View full details
FEATURES: Plastic construction Black in color INCLUDES: One Air Filter Housing One Foam Insert Element One Rubber Filter Base One Cable Tie SPECS: ...
View full details
FEATURES: Black plastic air filter housing with cover screen andand changeable elementRubber double angled neck for filterZip tie for fastening INC...
View full details
Air filter housing/ foam insert/ straight base/ angled base/ cable tie (1-each) (TRX® 2.5, 2.5R, 3.3) Air filter housing with foam insert include ...
View full details
Traxxas 17 tooth steel clutch bell. This clutch bell attaches to the adapter unit on the crankshaft, makes contact with the clutch shoes and meshes...
View full details
This is an optional 16-tooth clutch bell for the Traxxas monster trucks, such as the Traxxas Revo. Also included are two 5x8x0.5mm fiber spacing wa...
View full details
TRA5215 Clutch bell (15-tooth)/5x8x0.5mm fiber washer (2)/ 5mm eclip(requires 5x11x4mm ball bearings part #4611) (1.0 metric pitch)
This is the Clutch Bell with Washer and E-Clip for the Revo FEATURES: Metal construction Five cooling holes on the face of bell (bellow the teeth) ...
View full details
This is the optional differential spool for the Traxxas T-Maxx Truck. This is located in the bulkhead and eliminates the differential. This part is...
View full details
This is the ring gear and parts for the Traxxas T-Maxx 4WD Radio Control Monster Truck. These ring and pinion gears are installed in the front diff...
View full details
Steering bellcranks/ servo saver/ servo saver spring/ servo spring retainer (requires 5x11 BB (2) Steering bellcranks with servo saver, servo save...
View full details
Traxxas optional stainless steel suspension pin set for the Traxxas T-Maxx or E-Maxx Monster Trucks. These suspension pins hold the upper and lower...
View full details
Traxxas stock replacement EZ start motor has a pre-installed pinion. Positive end is identified. This motor is what turns the engine over in order ...
View full details
Traxxas aluminum engine mounting set is constructed of aluminum. Hex drives and Phillips drive. This set has all of hardware to assemble the engine...
View full details
This is a replacement fuel tank for the Traxxas Nitro Rustler Stadium truck kitFeatures:Clear plastic, flip-top style tank for glow fuel only.Nippl...
View full details
Traxxas 4429 Bumper Rear/Battery Box/Box Cover/3x15mm This is the Rear Bumper and Battery Box Cover for the Traxxas Nitro Slash Short Course Racing...
View full details
Traxxas clutch bells are made from durable steel for long-lasting performance. Available in a variety of sizes to fine tune your truck's gear ratio...
View full details
Traxxas clutch bells are made from durable steel for long-lasting performance. Available in a variety of sizes to fine tune your truck's gear ratio...
View full details
