Sold out
Traxxas X-Maxx Rear Body Support. Package includes replacement rear body support and hardware. Includes: Rear body Support (2) 3x15mm CS (2) 3x1...
View full details
Body, LaTrax® Desert PreRunner (clear, requires painting)/ decals From mild to wild, Traxxas clear bodies are your own personal canvas. You choos...
View full details
Traxxas assembled tuned pipe is made of molded composite construction with rubber header gasket. Black in color Includes: One Molded Composite Tune...
View full details
Oil, differential (20M wt) (standard) Super-thick 20 million weight differential oil has the consistency of thick putty and is most often used in c...
View full details
Spur gear, steel, 54-tooth (0.8 metric pitch, compatible with 32-pitch) (for center differential) The 54-tooth steel spur gear (32-pitch) fits the...
View full details
Sold out
Traxxas Lower 166mm Long Battery Compartment Chassis TRA3722X
Output drive, transmission or differential (pin retainer (1)/ drive cup (1)/ drive ball (1)/ drive pin (1)/ 3x10 screw pin (1)/ cross pin (black) ...
View full details
This is a replacement differential ring and pinion gear set for the Traxxas TRX-4. Package contains one ring gear and one pinion gear. Features:F...
View full details
Rod end set, complete (standard (10), angled 10-degrees (8), offset (4)) Rod end set features standard rod ends (10), 10-degree angled rod ends ...
View full details
Spare tire mount/ mounting bracket/ spare tire cover/ mounting hardware Replica spare tire for the TRX-4® 1979 Ford® Bronco body. Includes mount, ...
View full details
This is a replacement Traxxas X-Maxx Aluminum Stub Axle. This anodized aluminum stub axle is for use with 8s-spec heavy duty driveshaft (TRA7750X) ...
View full details
These are the Traxxas Unlimited Desert Racer Rear Axle Housing, Supports and Hubs.Stock Replacement OnUnlimited Desert Racer (UDR)
Turnbuckles, titanium 94mm (front tie rods) (2)/ billet aluminum wrench
This is a replacement Traxxas Unlimited Desert Racer Motor Mount, with two included pins. Features:Factory Replacement Mount Includes: (1) Motor M...
View full details
This is the Battery Charger for the optional NiMH Batteryused in the Traxxas TQi Docking Base.FEATURES:Charges the optional Traxxas #3037 NiMH batt...
View full details
This is a pack of two replacement Traxxas X-Maxx Wheels in Black color.
This is a Traxxas front lower bulkhead.Features: One-piece molded composite plastic construction Holds the steering, differential, skidplate and l...
View full details
Traxxas 7668X Wheel Nut Washer Aluminum Orange 3x12mm CS (4) LaTrax Teton / SST These are the Wheel Nut Washers for the LaTrax Teton Monster Truck ...
View full details
This is a set of four Traxxas Machined Aluminum Wheel Nut Washers in Red with four 3x12mm Cap Screws for the 1/18 scale LaTrax Desert PreRunner. Fe...
View full details
These are the optional wheel nut washers for the LaTrax Teton Monster Truck from Traxxas.Features: Green colored Made of aluminum For the LaTrax T...
View full details
These are the optional wheel nut washers for the LaTrax Teton Monster Truck from Traxxas.Features: Blue colored Made of aluminum For the LaTrax Te...
View full details
This is a pack of two replacement LaTrax Oil Shocks with Springs. These shocks are factory assembled, and include a bottle of 20wt silicone shock o...
View full details
Features: Clear molded polycarbonate construction Trimmed out wheel arches and body post holes Includes: Latrax Teton Clear Body with Decal Sheet...
View full details
This is the new Traxxas 6061-T6 Blue Aluminum Solid Axle Spool for the LaTrax Rally Car.Features: Blue colored Made of 6061-T6 aluminum For the Tr...
View full details
This is the pair of two Traxxas Front/Rear Aluminum Driveshaft Assembly for the LaTrax Rally Car.Features: Blue colored Made of Aluminum replaces ...
View full details
This is the Traxxas ExoCage, 1/16th Summit (includes mounting hardware). This is Traxxas part number 7220Part Number: 7220 / TRA7220Fits1/16 Summit...
View full details
This is a replacement Traxxas Steel Driveshaft Rebuild Kit, and is intended for use with the Traxxas 1/16 E-Revo and Slash trucks, as well as the 1...
View full details
This is the chassis for use on the Traxxas 1/16 E-Revo and Slash VXL vehicles.Features: Nylon construction that is grey in colorIncludes: One Chass...
View full details
This is the optional aluminum motor mount plate for the Traxxas Slash 4x4.Features: 6061-T6 aluminum construction that’s anodized blue in colorIncl...
View full details
This is a replacement Traxxas Center Differential Gear Set, and is intended for use with the Traxxas Slash 4x4.
This is a replacement Traxxas Differential Gear Set, differential (output gears (2), spider gears (2), spider gear shaft, and carrier support) and ...
View full details
Features:Steel constructionIncludes:One Differential Ring GearOne Differential Pinion GearRequires:Installation in differential assemblyTechnical S...
View full details
This is the clear LED lightbar in chrome for the Traxxas Stampede 4x4 VXL.Features: Four clear LED lights in chrome finish plastic housingsIncludes...
View full details
This is the replacement Traxxas Rear Ring and Pinion Gear for the Stampede 4x4. This set features a 12 tooth pinion and 47 tooth ring gear, and is ...
View full details
This is the Traxxas Complete High Stall Clutch Gear for the Telluride 4x4.Features: Black and silver/grey colored Made of tough plastic and steel ...
View full details
This is the Traxxas 3x8mm Right and Left Tunnels and Vent Cover. This Tunnels and Vent Cover is compatible with the Traxxas XO-1.Features:Construct...
View full details
This is an optional Traxxas LED Light Bar Set and is intended for use with the Traxxas Summit. Now you can blaze even brighter trails! The new Acce...
View full details
Bulkhead, Rear (Left & Right Halves) for Summit Replacement Part For: Summit (Model# 56076-4)
This is the front bulkhead for use on the Traxxas Summit Truck RTR.Features: Nylon construction that is black in colorIncludes: One Front Bulkhead ...
View full details
Traxxas Primary Clutch Assembly Jato Features: Metal Construction Silver in color Includes: One Primary Clutch Assembly Fits: Traxxas Nitro Jato
Traxxas Differential Ring Gear/Pinion Gear Features: Direct replacement part Includes: One differential ring gear One pinion gear Fits: Traxx...
View full details
Traxxas front left and right halves differential bulkhead for the Revo are constructed of black plastic. Rocker shafts preinstalled. This package i...
View full details
Bulkhead, rear (L&R halves)/ diff retainer, rear/ 4x14mm BCS (2) Rear left and right bulkhead halves with differential retainer and 4x14 screw...
View full details
Control box (complete) (EZ-Start® 2) Replacement starter control box for the EZ-Start® 2 starter. Replacement part for these models: Jato® Nitro...
View full details
This is the motor and pinion gear for the Traxxas EZ Start 2 (R) System.Features: Pre-installed 10 tooth pinion gearIncludes: Motor and Pinion Gear...
View full details
Traxxas stock plastic tuned pipe used on the 2.5 T-Maxx. This is the muffler that attaches to the header. Black plastic. Pre-installed pressure fit...
View full details
FEATURES: Constructed of aluminum. INCLUDES: One Traxxas Exhaust Header Set for the Nitro 4-Tec and the Nitro Sport with: One Pipe Two 3mm x 25mm S...
View full details
