Traxxas transmission output shaft for the Revo. Constructed of black metal. Specs:Overall length: 3-3/8 (85mm)Diameter: 1/4" (6mm)

Traxxas chassis brace is constructed of 0.12 (3mm) thick 6061 T-6 aluminum and anodized blue in color. INCLUDES: Chassis Brace and 4x16mm hex head ...

This is the steering linkage for the Traxxas Revo.Features: Connects between servo horns and steering armsIncludes: Two 3x30mm steel turnbuckles, f...

TRA5336A Bumper, rear (chrome)/ bumper mount, rear/ 4x10mm BCS (2)/ 3x25mm BCS (2)

TRA5335A Bumper, front (chrome)/ bumper mount, front/ 4x10mm BCS (2)/3x25mm BCS (2)

Traxxas optional backplate (rear cover) is constructed of aluminum pre-installed o-ring gasket. Includes: One backplate with pre-installed o-ring g...

Traxxas Gearbox Halves Front/Rear Features: Holds all gears including the 2speed gear set and input shaft Gray in color, constructed of hardened p...

Traxxas Output Gear Assembly Forward Features: Replaces stock forward output gear. Constructed of plastic. Includes: One 26 tooth forward output...

This is the Output Shaft and Spacer for the Traxxas T-Maxx4WD Radio Control Monster Truck.This shaft installs between the output gear and the clutc...

This is the Transmission Skidplate for theTraxxas New T-Maxx 4WD Nitro Monster Truck RTRFEATURES:Attaches to and protects chassis and transmissionS...

This is the Shift Linkage Set for the Traxxas 3.3 T-Maxx.FEATURES:Installs on shift servo and controls shifting of the transmissionINCLUDES:Servo h...

Traxxas optional aluminum brake adapter for the T-Maxx monster truck.; Features blue aluminum construction.; This is to be used with the heavy duty...

This is the Brake Adapter for the Traxxas T-Maxx 4WD RTR Monster Truck.This adapter fits in the center of the brake disc and fastensto the output y...

These are aluminum hex wheel hubs for the T-Maxx and E-Maxx Truck kits.Features: Blue anodized Machined 6061 T-6 aluminum construction Packaged in...

Traxxas heavy duty half shafts (short) for the T-Maxx 2.5. Constructed of black nylon. These come out of either side of the transmission. This pack...

This is a pair of replacement Steering Bellcranks for the Traxxas T/E-Maxx Monster Trucks. These bellcranks bolt to the chassis and the bellcrank p...

INCLUDED: One set of axle carriers and steering blocks for the T-Maxx. Set of Axle Carriers and Steering Blocks for the T-Maxx 4WD Radio Control Mo...

Traxxas Chassis Braces Lower Gray (2) Features: Supports center of chassis Gray in color, constructed of hardened plastic Includes: Two Lower Ch...

FEATURES: One way hub and E-Ring INCLUDES: One way Hub E-ring

This is a 10x19mm ball bearing from Traxxas. It is primarily for used in the 2-speed Spur Gear on the Traxxas T-Maxx.Features: Ball bearings reduc...

FEATURESBlack Hard Rubber Construction6mm Width, 50 Groove HTD INCLUDESOne Rear Drive Belt REQUIREMENTSInstallation onto kit

This is a set of two Traxxas Pro-Trax 2.2 Rear Buggy Tires with Inserts. These tires feature a spiked tread design, and soft compound rubber constr...

This is the Traxxas pair of X-Long Rear Shocks for the Traxxas Nitro Rustler. These shocks are a pre-assembled and are hard-anodized and Teflon coa...

This is the Traxxas pair of Long Shocks. One bottle of silicone shock oil is included. Features: T-6 aluminum construction Greatly reduces piston/...

This is the Plastic Tuned Pipe for use    with the Traxxas 2.5 and 2.5R engine equipped vehicles.FEATURES:Black plastic constructionDirect replacem...

Traxxas belt is constructed of black fiber. Specs: Length: 250mmWidth: 4mm

This is the replacement rear bulkhead for the Traxxas Nitro Stampede.Features: Sturdy black nylon constructionIncludes: One rear bulkhead for the T...

Spring, throttle return (2) (Nitro 4-Tec) Accessory part for these models: TRX® 2.5R TRX® 3.3 TRX® Pro .15 TRX® Pro .15 Marine

Screws, 2.5x5mm button-head machine (hex drive) (6)

Screws, 3x12mm washerhead self-tapping (6)

Screws, 3x15mm countersunk machine (6)

Screws, 3x20mm countersunk machine screws (6)

Screws, 4x15mm roundhead machine (6)

Screws, 2.6x8mm roundhead machine (6)

Servo case/gaskets (for 2085 servo)

Idler gear, machined-aluminum (not for use with steel top gear) (hard-anodized) (30-tooth)

This is a Team Losi Racing Chassis Foam Set, intended for use with the Team Losi Racing 22 1/10 buggy.

These are the Team Losi Racing Front Axles for the Losi 22T.Features: Black colored Made of metal For the Losi 22T Includes:Two Team Losi Racing ...

RPM Front Shock Tower

RPM80675 Rear A-Arms, Blue: Traxxas 1/16 Slash 4x4

PRO6101-00 PRO-2 FR HUB KIT SLASH