This is the Shock Mount Lower and Wire RetainerFor the Traxxas Funny CarsFEATURES:Black plasticINCLUDES:One shock mountOne wire retainerCOMMENTS:Th...

FEATURES: Metal construction, red colored INCLUDES: Two shock springs COMMENTS: This spring as a rate of 0.82 and a triple orange compression.

This is a replacement Traxxas Differential Gear Set, and is intended for use with the Traxxas 1/8 Scale Funny Car. This set includes the necessary ...

VTR237004 5mm x 10mm x 4mm Ball Bearing (2)

VTR234005 Front Tie Rod Set: Twin Hammers

VTR232040 Gearbox Upper Lower Set: V100

TRA7659 Spring, shock, firm (1 pair)

This is the Traxxas Upper Chassis (Long) Battery Hold Down for the 1/18 scale LaTrax Desert PreRunner. Featrues: Molded in blue durable plasticRepl...

This is the Traxxas Camber rods, 2-degree/3-degree (6 each). This is Traxxas part number 7539Part Number: 7539 / TRA7539FitsLaTrax Rally

This is the Green Body for the Latrax Rally Car from Traxxas, TRAD90GG.FEATURES:Molded polycarbonate constructionTrimmed and painted with green, wh...

This is the front bumper and mount for the Traxxas 1/16 scale Rally VXL.Features: Black plastic constructionIncludes: One Mount and BumperRequires:...

TRA7186 LED lights, light harness (4 clear, 4 red)/ bumpers, front & rear/ wire ties (3) (requires power supply #7286)

Traxxas front and rear bumpers for use on the 1/16 E-Revo VXL 4WD RTR. Plastic construction. Black chrome plated.Requires: Installation on the vehicle

This is the Input and Output Shafts for use on 16th scale Traxxas. Features: Steel construction Black in color   Includes: (1) Input Shaft (...

These are the GTR shock shafts for use on the Traxxas 1/16 E-Revo and Slash VXL vehicles.Features: Aluminum construction that is silver in colorInc...

This is the Traxxas Gear, 26-T pinion (48-pitch, 2.3mm shaft)/ set screw. This is Traxxas part number 7040Part Number: 7040 / TRA7040Fits1/16 E-Rev...

This is a set of four Traxxas Molded Composite Push Rods in Red with eight Hollow Balls for the 1/16 Scale Slash 4WD and E-Revo.

This is the Front Tie Bar in Aluminum for the Traxxas NHRA Funny Car, TRAD69**.FEATURES:Titanium anodized aluminum constructionINCLUDES:Front Tie B...

Traxxas pair of SCT Split Spoke Wheels in Red. Fits front and rear of the Slash 4x4 and the rear of the 2 wheel drive Slash. Red colored wheel with...

These are the decal sheets for the 1/10 scale 4x4 Traxxas Slash.Features: Full-color sponsor, body trim and Traxxas logos in various sizes Precut ...

This is a replacement Traxxas Temperature & Voltage Telemetry Sensor, and is intended for use with the Traxxas XO-1. Temperature data is critic...

This is a replacement pair of Traxxas Pre-Mounted Rear Tires and are intended for use with the Traxxas XO-1. The tires come assembled and glued on ...

This is a replacement Traxxas Aluminum Front Shock Tower, and is intended for use with the Traxxas X0-1.

TRA5889 Tires & wheels, assembled, glued (SCT Split-Spoke black,satin chrome beadlock style wheel, dual profile (2.2" outer,3.0" inner), SCT of...

Traxxas pair of front springs are constructed of white steel.  Specs:Length: 59mm (2.3")Outer Diameter: 16.75mm (0.66")Inner Diameter: 14.3mm (0.56...

This is the optional Two Speed Conversion Kit for the Traxxas E-Revo, TRAC07**. **This conversion kit requires a 3-channel transmitter to shift gea...

Bulkhead, Rear (Left & Right Halves) for Summit  Replacement Part For: Summit (Model# 56076-4)

This is the front bulkhead for use on the Traxxas Summit Truck RTR.Features: Nylon construction that is black in colorIncludes: One Front Bulkhead ...

This is the Mamba ESC mounting plate from Traxxas.Features: Nylon construction that’s black in colorIncludes: ESC Mounting Plate Two 3x35mm Cap He...

These are front All-Star chrome front 2.8 wheels for the Traxxas Nitro Jato Stadium Truck.Features: Nylon construction Chrome plated Five spoke wh...

This is a pair of Traxxas "Alias" rear tires with foam inserts. Whether racing on a track or tearing across a back lot, the rear Alias tires are th...

This is the Input Shaft and Spacer for the Traxxas Nitro Jato Stadium Truck. FEATURES:Metal ConstructionBlack in color INCLUDES:One Input Shaft (Sl...

Traxxas engine mount and hardware is constructed of metal and silver in color INCLUDES: One Silver Engine Mount Two Engine Mount Spacers Four 3mm x...

These are the Front/Rear Suspension Tie Barsfor the Traxxas Nitro Jato Stadium Truck.FEATURES:Aluminum ConstructionBlue in ColorINCLUDES:One 4° F/R...

These are the optional Front Caster Blocks for the Traxxas Jato.These are located on the front suspension assembly.FEATURES:Titanium-anodized alumi...

These are the rear left and right suspension arms for the Traxxas Nitro Jato Stadium Truck.Features: Nylon construction that’s black in colorInclud...

Traxxas left and right caster and steering blocks are constructed of nylon and black in color INCLUDES: One Left and Right 30 Caster Blocks One Lef...

This is the Replacement Differential Output Yokes for the Jato by Traxxas. Features: Nylon construction Black in color   Includes: (2) Diffe...

This is optional Heavy Duty Rod Ends from Traxxas. Features: Heavy duty plastic construction Black in color   Includes: (8) Rod Ends   Spec...

Traxxas chassis is made of high-grade 7075-T6 aluminum construction, in a titanium anodized finish make for a chassis 40% stronger than the stock c...

TRA5518 Shock tower, front

Traxxas optional Wheelie Bar Mount for all versions of the Traxxas Revo. Constructed of black hardened plastic. Installs at rear of chassis to hold...

Traxxas rubber shock boots have rubber construction, blue in color and flexible material. Includes: Two Blue rubber Shock Boots and Two black Plast...

Stub Axle,Steel:Revo,TMX 3.3,EMX,SLY This is a pair of replacement Stub Axles for the Traxxas Revo.The wheels attach to the axles. Features Steel c...

Traxxas spring shock GTR 4.1 rate tan for the Revo. Green tension shock spring set for the Revo GTR Shocks. These springs are installed on the shoc...

Traxxas reverse kit adds mechanical reverse to the Revo. All mechanical reverse components including the #2060 sub-micro servo and illustrated inst...