Product Details This high quality 10T Spiral Main Input Gear is the perfect part to carry in your RC tool box. Features Super-tough steel for l...

Screws, 3x10mm countersunk machine (6) (hex drive) 3x10 mm countersunk machine screws with hex drive heads. Set of six. Replacement part for thes...

High-Intensity LED Light Kit for Maxx Monster Trucks Built Maxx© Tough! The Traxxas Maxx redefines speed, durability and toughness with its innova...

This is the Fox Edition Body for the Traxxas Slash and Slash 4x4.FEATURES:Molded plastic constructionTrimmed and painted with decals appliedBlack a...

This is a Traxxas Steering Bellcranks/bellcrank Support/Servo Saver.Features: Molded composite plastic construction and Steel servo saver springInc...

Product Details This high-quality 141.5mm CVD Driveshaft is the perfect part to carry in your RC tool box. Features Super-tough steel for long-...

Product Details These high-quality E-Clips are ideal parts for your tool box. Features Strong and hard-wearing steel for long-lasting performan...

Bulkhead, rear (upper & lower), center differential (replacing #7727 & #7728 requires #5108 ball bearings (2)) Rear upper and lower X-Maxx...

BENT BODY CLIPS BLUE (8)

This is the Differential Gear Set for the Arrma Kraton and Typhon FEATURES: Steel construction INCLUDES: Four 10 tooth Satellite Gears Two Metal Cr...

Product Details Key Features Red anodized aluminum 6mm thick motor plate for strong, accurate motor positioning and excellent heat dissipatio...

The ADS-7M V2 Servo is designed to give you fast and precise steering. Resilient to the elements and built from hard-wearing materials.Specificatio...

At just over 2" wide, stock 1/16th scale Traxxas Mini E-Revo bumpers just aren't large enough to provide any protection to the front or rear end of...

This is the Traxxas Battery Hold-Down with Tall Retainers for the 1/10 scale Rally VXL and Slash LCG.Features: Black colored Made of plastic For t...

These are the rubber sealed ball bearings for use on the Traxxas 1/16 E-Revo and Slash VXL 4WD vehicles.Features: Blue rubber sealed May also be u...

Air filter inserts, foam (3) (pre-oiled) (TRX® 2.5) Pack of three replacement pre-oiled air filter inserts for TRX® 2.5, 2.5R, and 3.3 engines. R...

Product Details This Aluminium Front Front Suspension Mount is the perfect replacement for your kit item. Features Manufactured from lightweigh...

Product Details These Heavy-Duty Front Upper Suspension Arms have been designed ARRMA tough so you can send it high with confidence Features He...

RPM A-arms for the Traxxas Slash 4x4, Rustler 4x4 & Stampede 4x4 are everything you've come to expect from RPM and more! Take a look at everyt...

FEATURES: - CNC machined aluminum, anodized black- 4mm carbon fiber steering arms- Aluminum hub nuts with Delrin cups and o-ring position locks- He...

Product Details These high-quality steel Pins are the perfect spare part to keep in your RC tool box. Features Super-tough steel for long-lasti...

Box, receiver (sealed)/ foam pad/ silicone grease/ 3x8mm BCS (2)/ 2.5x8mm CS (2)/ 3x6mm BCS (2) Waterproof receiver box includes foam pad, silic...

Rebuild kit, Velineon® 3500 (includes plastic endbell,  5x11x4mm ball bearings (2), 2.5x5mm BCS (with threadlock) (4), rear bushing) Rebuild kit f...

Product Details These high-quality Set Screws are the perfect item to carry in your RC tool box. Features Super-strong steel material for long-...

Idler gear, steel (30-tooth) Replacement 30-tooth steel idler gear for the Magnum 272 transmission. Does not fit Magnum 272R transmission. Repla...

Suspension arm set, front (includes upper right & left and lower right & left arms) Front suspension arm set includes upper right & le...

Give your favorite Traxxas vehicle added protection with the RPM wide front bumper. This bumper stands six inches wide and adds an extra 1-1/2" wor...

Bottle, fuel filler (500cc) The fuel bottle holds 500 cc of fuel and includes a long, bent, blue-anodized spout for easy filling. A rubber cap and...

Screw pin set (Rustler®/ Bandit/ Stampede®) Suspension screw pin set Replacement part for these models: Bandit® BIGFOOT® No. 1 Officially Licens...

Product Details This high-quality Flat Head Screw is manufactured from super-tough material for long-lasting durability. Features: Precision he...

Wheel hex clips (6) Set of six wheel hex clips Replacement part for these models: X-Maxx® Ultimate X-Maxx® XRT® Ultimate XRT®

Body mounts, front & rear/ body mount posts, front & rear/ 2.5x18mm screw pins (4)/ 4x10mm BCS (1) Front and rear body mounts and body pos...

Pipe coupler, molded (for use with pipes 5152 (T-Maxx®) & 4452R) (TRX® 2.5, 2.5R, 3.3) Blue pipe coupler for use with pipes 5152 and 4452R exh...

Washers, 3x6mm metal (12) Pack of twelve 3x6 mm metal washers Replacement part for these models: Drag Slash 1967 Chevrolet® C10 Truck Drag Slash...

RPM front A-arms for the Traxxas Slash 2wd, Nitro Slash, e-Rustler & e-Stampede 2wd are built to withstand some of the toughest abuse. Incredib...

RPM81762 Rear Bumper Mount :X-Maxx Description The¶ôǨRPM¶ôǨRear Bumper Mount is a beefy alternative to the small beam supports offered with stock p...

Driveshafts, rear, steel-spline constant-velocity (complete assembly) (2)

TLR2952 Silicone Diff Grease, 8cc: 22

Product Details This ARRMA IC5 Loop Connector allows the use of a 4S or 6S LiPo battery pack in your ARRMA vehicle. It should be connected to ...

This is the chassis for use on the Traxxas 1/16 E-Revo and Slash VXL vehicles.Features: Nylon construction that is grey in colorIncludes: One Chass...

Screws, 3x12mm countersunk machine (6) (hex drive) 3x12 mm countersunk machine screws with hex drive heads. Set of six. Replacement part for thes...

Screws, 3x15mm countersunk machine (6) (hex drive)

Body mounts (posts), front & rear Front and rear body mounts Replacement part for these models: 1/18 LaTrax® Desert Prerunner 1/18 LaTrax® T...

Gear, 20-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears) 20-tooth pinion gear (1.0 metric pitch) fits...

Spur gear, 54-tooth, steel (1.0 metric pitch) 54-tooth spur gear (1.0 metric pitch) has steel teeth for superior power handling and durability. ...

These are the Traxxas Ball Bearings for the LaTrax Rally Car.Features: Silver/grey colored Made of Steel for a long life time Replaces all bushing...

This is a Traxxas M0.8P, 52T spur gear.Features: M0.8 pitch 52 tooth Black plastic construction Compatible with 32P pinion gears Includes: One M0...

TRA5459 Revo T-Maxx Rubber Driveshaft Boots(2) Boots, driveshaft (rubber) (2) Replacement part for these models: E-Revo Brushless E-Revo Revo T-Maxx