Filters
Accessories
Brand
- ARRMA
- ASSOCIATED
- AXIAL
- Big Boys With Cool Toys
- CASTLE CREATIONS
- DROMIDA
- DU-BRO
- DURATRAX
- DYNAMITE
- ECX
- HOT RACING
- HPI RACING
- LOSI
Component
Part Type
Parts Category
TRA5191X 4 WHEEL DRIVE UPGRADE KIT
TRAXXAS
This is the Traxxas SportMaxx 4WD Module.This kit converts the SportMaxx to 4 wheel drive.FEATURES:Increases climbing tractionAll major components ...
View full details
TRA5188 Driveshaft, steel constant-velocity (shaft only, 112mm)
TRAXXAS
This is a Driveshaft for the Traxxas E-Maxx.FEATURES:Steel constructionCan be used to replace a bent or damaged rear center driveshaftINCLUDES:One ...
View full details
TRA5122X Chassis, T-Maxx, long wheelbase (extended 30mm) (blue anodized)
TRAXXAS
This is the Long Wheelbase Chassis for the Traxxas T-Maxx.FEATURES:Constructed of 6061-T6 aluminum, anodized blue in color1.18" (30mm) longer than ...
View full details
TRA4994R Gear, 26-T (Replacement gear for the 4994X forward-only shaft)
TRAXXAS
This is a 26 Tooth Gear for the Traxxas T-Maxx Forward Only Shaft.FEATURES:This is the gear for the shaft that converts the T-Maxx to forward only ...
View full details
TRA4993 Gear shaft, primary(1)
TRAXXAS
Traxxas Gear Shaft Primary Features: Replaces stock gear shaft. Constructed of steel. Includes: One gear shaft Part Compatibility: Traxxas S-...
View full details
TRA4992X Input shaft, transmission (slipper shaft, T-Maxx Torque Control Slipper Upgrade Kit) (fits first generation T-Maxx transmission w/o Optidrive)
TRAXXAS
FEATURES: Fits first generation T-Maxx transmission without OptidriveSteel shaft with plastic gear22T and 17T gearsPre-assembled on shaft INCLUDES:...
View full details
TRA4986 Gear hub assembly, 1st/ one-way bearing/ snap ring
TRAXXAS
Traxxas replacement gear hub assembly for the T-Maxx 4WD Radion Control Monster Truck. This is the replacement gear hub assembly. This gear hub ass...
View full details
TRA4981X Spool (eliminates differential, use off-road only)(requires #4981 ring gear)
TRAXXAS
This is the optional differential spool for the Traxxas T-Maxx Truck. This is located in the bulkhead and eliminates the differential. This part is...
View full details
TRA4934X Aluminum caps, pivot ball (blue-anodized) (4)
TRAXXAS
Replaces stock silver pivot ball aluminum caps. Constructed of blue aluminum.
TRA4919 Servo mounts, throttle/ brake (1) (black)
TRAXXAS
TRA4919 Servo mounts, throttle/ brake (1) (black)
TRA4918A Servo mounts, steering/shift (f&r)(grey)
TRAXXAS
Traxxas servo steering/shift mounts for the T-Maxx 3.3 are made of gray plastic construction. Includes: Two mounts Specs:Length: 1-1/2" (38mm)Widt...
View full details
TRA4895 PULLEYS 20 GROOVE
TRAXXAS
These are 20 Groove Middle Pulleys by Traxxas.FEATURES:Black in colorHard Plastic Construction for the Pulleys and Flanges.Metal Construction for t...
View full details
TRA4887 SPUR GEAR, 45T, N4-TEC
TRAXXAS
Traxxas optional 45T spur gear is constructed of black nylon. INCLUDES: One 45T spur gear. This is listed in the manual as the 1st gear.
TRA4819 CLUTCH GEAR 2nd GEAR 19T OPTION
TRAXXAS
Traxxas Clutch Gear 2nd Speed 19T Features: Steel Construction Includes: One 19 Tooth Gear Specs: # Teeth: 19T Part Compatibility: Traxxas ...
View full details
TRA4815 CLUTCH GEAR 1st 15T OPTION
TRAXXAS
FEATURES: Steel Construction INCLUDES: One Gear REQUIRES: Traxxas Clutch Bell SPECS: Length: 6 mm (0.243") Diameter: 17 mm (0.675") Teeth: 15
TRA4550 Exhaust header w/ gasket & screws
TRAXXAS
FEATURES: Constructed of aluminum. INCLUDES: One Traxxas Exhaust Header Set for the Nitro 4-Tec and the Nitro Sport with: One Pipe Two 3mm x 25mm S...
View full details
TRA4449 Fuel tank rebuild kit
TRAXXAS
This is the fuel tank rebuild kit for the Traxxas Rustler.Features: Direct fit replacement partsIncludes: Tank cap Tank seal Tank cap spring Small...
View full details
TRA4436 Cover, receiver
TRAXXAS
This is the Receiver Cover for theTraxxas Nitro Slash Short Course Racing Truck,FEATURES:Plastic constructionFastens to chassis and fits over recei...
View full details
TRA4428 EZ-Start mount/ clamp/ 2.6x10mm RST (4)
TRAXXAS
TRA4428 EZ-Start mount/ clamp/ 2.6x10mm RST (4)
VEN4036R ATOMIK ALLOY REAR SKID PATE 1:10 TRAXXAS E-REVO - RED
ATOMIK
VEN4036R ATOMIK ALLOY REAR SKID PATE 1:10 TRAXXAS E-REVO - RED
TRA4192A Bulkhead (rear) (grey)
TRAXXAS
This is the Rear Grey Bulkhead for the Traxxas Nitro Stampede. Features Sturdy grey nylon construction Includes One rear bulkhead for the Traxxas N...
View full details
TRA4174 TRX Pro-Star chrome wheels (2) (front) (for 2.2" tires)
TRAXXAS
These cool, 5-spoke chrome wheels can be used to replace the dished wheels on older models. The TRX Pro-Star wheels feature a chrome-less gluing su...
View full details
TRA4116 Clutch bell, (16-tooth)/5x8x0.5mm fiber washer (2)/ 5mm E-clip (requires #2728 - ball bearings, 5x8x2.5mm (2)
TRAXXAS
Traxxas clutch bells are made from durable steel for long-lasting performance. Available in a variety of sizes to fine tune your truck's gear ratio...
View full details
TRA3994X SHAFT LIGHT OUTPUT/IDLE
TRAXXAS
Traxxas 3994X Shaft Low Idler Gear Shaft E-Maxx This is the Lightweight Output/Idler Gear Shaft for the Traxxas E-Maxx.This shaft is located in th...
View full details
TRA3977A Cover, gear (upper & lower) (1)/ dust plug (1)/ 3x6mm CS (3)
TRAXXAS
This is the optional Single Motor Gear Cover for theTraxxas E-Maxx 16.8V RTR, TRAD22**.FEATURES:Constructed of plasticAllows installation of a sing...
View full details
TRA3923 Traxxas Battery Hold-Downs E-Maxx (2)
TRAXXAS
This is the Replacement Battery Hold Down Set for the Traxxas E-Maxx Truck. These hold downs screw directly into the chassis.Features: Black nylon...
View full details
TRA3515 Radio tray/drive shaft mount
TRAXXAS
Tray, radio/ drive shaft mount w/ pressure fitting
TRA3372 Rebuild kit, Velineon 380 (4x9x4mm ball bearings (2), 2x6mm CCS (with threadlock) (2), front shims (2))
TRAXXAS
¶ÿRebuild kit, Velineon 380 (4x9x4mm ball bearings (2), 2x6mm CCS (with threadlock) (2), front shims (2))
TRA3032 Power adapter, DC (12V car adapter for TRX Power Charger)
TRAXXAS
Power adapter, DC (12V car adapter for TRX Power Charger)
TRA2739 Suspension pin set, stainless steel (w/ E-clips)
TRAXXAS
Suspension pin set, stainless steel (w/ E-clips)
Save 50%
TRA2673 Screws, 2.6x10mm roundhead self-tapping (6)
TRAXXAS
Screws, 2.6x10mm roundhead self-tapping (6)
TLR8200 Body Washer: 8IGHT 2.0
TEAM LOSI RACING
This is a pack of two Team Losi Racing Lexan Body Washers, and are intended for use with the Team Losi 8IGHT 2.0 1/8 scale buggies.¶ôǨ
