TRA7135 Bumpers, front (1)/ rear (1)
TRAXXAS
Traxxas front and rear bumpers for use on the 1/16 E-Revo VXL 4WD RTR. Plastic construction. Black chrome plated.Requires: Installation on the vehicle
Traxxas front and rear bumpers for use on the 1/16 E-Revo VXL 4WD RTR. Plastic construction. Black chrome plated.Requires: Installation on the vehicle
This is the Input and Output Shafts for use on 16th scale Traxxas. Features: Steel construction Black in color Includes: (1) Input Shaft (...
View full details
These are the GTR shock shafts for use on the Traxxas 1/16 E-Revo and Slash VXL vehicles.Features: Aluminum construction that is silver in colorInc...
View full details
This is the Traxxas Gear, 26-T pinion (48-pitch, 2.3mm shaft)/ set screw. This is Traxxas part number 7040Part Number: 7040 / TRA7040Fits1/16 E-Rev...
View full details
This is a set of four Traxxas Molded Composite Push Rods in Red with eight Hollow Balls for the 1/16 Scale Slash 4WD and E-Revo.
This is the Front Tie Bar in Aluminum for the Traxxas NHRA Funny Car, TRAD69**.FEATURES:Titanium anodized aluminum constructionINCLUDES:Front Tie B...
View full details
Traxxas pair of SCT Split Spoke Wheels in Red. Fits front and rear of the Slash 4x4 and the rear of the 2 wheel drive Slash. Red colored wheel with...
View full details
This is a replacement Traxxas Temperature & Voltage Telemetry Sensor, and is intended for use with the Traxxas XO-1. Temperature data is critic...
View full details
This is a replacement pair of Traxxas Pre-Mounted Rear Tires and are intended for use with the Traxxas XO-1. The tires come assembled and glued on ...
View full details
This is a replacement Traxxas Aluminum Front Shock Tower, and is intended for use with the Traxxas X0-1.
This is a pair of steering blocks for the Traxxas XO-1.Features: Aluminum construction that is anodized and blue in colorIncludes: One each Left an...
View full details
These are Traxxas Tire Wheel Assembled Glue SCT Split-Spoke Black.Features: Fits the rear of 2WD short course trucks and the front and rear of 4WD...
View full details
Traxxas pair of front springs are constructed of white steel. Specs:Length: 59mm (2.3")Outer Diameter: 16.75mm (0.66")Inner Diameter: 14.3mm (0.56...
View full details
This is the optional Two Speed Conversion Kit for the Traxxas E-Revo, TRAC07**. **This conversion kit requires a 3-channel transmitter to shift gea...
View full details
Bulkhead, Rear (Left & Right Halves) for Summit Replacement Part For: Summit (Model# 56076-4)
This is the front bulkhead for use on the Traxxas Summit Truck RTR.Features: Nylon construction that is black in colorIncludes: One Front Bulkhead ...
View full details
This is the Mamba ESC mounting plate from Traxxas.Features: Nylon construction that’s black in colorIncludes: ESC Mounting Plate Two 3x35mm Cap He...
View full details
These are front All-Star chrome front 2.8 wheels for the Traxxas Nitro Jato Stadium Truck.Features: Nylon construction Chrome plated Five spoke wh...
View full details
This is a pair of Traxxas "Alias" rear tires with foam inserts. Whether racing on a track or tearing across a back lot, the rear Alias tires are th...
View full details
This is the Input Shaft and Spacer for the Traxxas Nitro Jato Stadium Truck. FEATURES:Metal ConstructionBlack in color INCLUDES:One Input Shaft (Sl...
View full details
Traxxas engine mount and hardware is constructed of metal and silver in color INCLUDES: One Silver Engine Mount Two Engine Mount Spacers Four 3mm x...
View full details
These are the left and right 25 degree aluminum steering blocks for the Traxxas Nitro Jato Stadium Truck.Features: Aluminum construction in natural...
View full details
These are the rear left and right suspension arms for the Traxxas Nitro Jato Stadium Truck.Features: Nylon construction that’s black in colorInclud...
View full details
Traxxas left and right caster and steering blocks are constructed of nylon and black in color INCLUDES: One Left and Right 30 Caster Blocks One Lef...
View full details
This is the Replacement Differential Output Yokes for the Jato by Traxxas. Features: Nylon construction Black in color Includes: (2) Diffe...
View full details
This is optional Heavy Duty Rod Ends from Traxxas. Features: Heavy duty plastic construction Black in color Includes: (8) Rod Ends Spec...
View full details
Traxxas optional Wheelie Bar Mount for all versions of the Traxxas Revo. Constructed of black hardened plastic. Installs at rear of chassis to hold...
View full details
Traxxas rubber shock boots have rubber construction, blue in color and flexible material. Includes: Two Blue rubber Shock Boots and Two black Plast...
View full details
Stub Axle,Steel:Revo,TMX 3.3,EMX,SLY This is a pair of replacement Stub Axles for the Traxxas Revo.The wheels attach to the axles. Features Steel c...
View full details
Traxxas spring shock GTR 4.1 rate tan for the Revo. Green tension shock spring set for the Revo GTR Shocks. These springs are installed on the shoc...
View full details
TRA5433 Spring, shock (white) (GTR) (std. rear) (1.4 rate pink) (1 pair)
Traxxas reverse kit adds mechanical reverse to the Revo. All mechanical reverse components including the #2060 sub-micro servo and illustrated inst...
View full details
Traxxas transmission output shaft for the Revo. Constructed of black metal. Specs:Overall length: 3-3/8 (85mm)Diameter: 1/4" (6mm)
Traxxas chassis brace is constructed of 0.12 (3mm) thick 6061 T-6 aluminum and anodized blue in color. INCLUDES: Chassis Brace and 4x16mm hex head ...
View full details
TRA5336A Bumper, rear (chrome)/ bumper mount, rear/ 4x10mm BCS (2)/ 3x25mm BCS (2)
TRA5335A Bumper, front (chrome)/ bumper mount, front/ 4x10mm BCS (2)/3x25mm BCS (2)
TRA5316 Roll hoop, plastic/ transmission skid guard, plastic
Traxxas optional backplate (rear cover) is constructed of aluminum pre-installed o-ring gasket. Includes: One backplate with pre-installed o-ring g...
View full details
Traxxas Gearbox Halves Front/Rear Features: Holds all gears including the 2speed gear set and input shaft Gray in color, constructed of hardened p...
View full details
Traxxas Output Gear Assembly Forward Features: Replaces stock forward output gear. Constructed of plastic. Includes: One 26 tooth forward output...
View full details
This is the Output Shaft and Spacer for the Traxxas T-Maxx4WD Radio Control Monster Truck.This shaft installs between the output gear and the clutc...
View full details
This is the Transmission Skidplate for theTraxxas New T-Maxx 4WD Nitro Monster Truck RTRFEATURES:Attaches to and protects chassis and transmissionS...
View full details
Traxxas optional aluminum brake adapter for the T-Maxx monster truck.; Features blue aluminum construction.; This is to be used with the heavy duty...
View full details
TRA4965 Brake pads (2)/ brake piston/ 3x15mm cap hex screws (2)
These are aluminum hex wheel hubs for the T-Maxx and E-Maxx Truck kits.Features: Blue anodized Machined 6061 T-6 aluminum construction Packaged in...
View full details
Traxxas heavy duty half shafts (short) for the T-Maxx 2.5. Constructed of black nylon. These come out of either side of the transmission. This pack...
View full detailsWe invite you to join our mailing list to receive specials and promotions.
EMAIL: sales@bigboyswithcooltoys.ca
STORE LOCATION: OR-
TEXT 647-321-1965
Need help ONLINE ?
text online support MESSAGES WILL BE ANSWERED
from 10am to 3pm - EST- 7 DAYS A WEEK
** Response times From senior staff 2 TO 3HRS